TT-Chassis 045-15s - 45 Watt Extended - 1,5 mm Steel

Mounting kit for all TT-Chassis which are designed for mounting with cagenuts and 19" housings

Included are:

• 4 x cagenut M6
• 4 x thread screw M6 x 30

Faceplate for TT Amp-Kit PX45

• Farbe: #LG10 gold GLÄNZEND lackiert
• Material: 1.5 mm Acryl Revers
• Front + Rück Blende

Files:

• Template

• Pri: 120, 230V, 240V @ 50Hz
• (Pri: 0-120V | 0-110-120 V)
• Sec1: 345-0-345V @ 200 mA
• Sec2: 6,3 VCT @ 6A
• Sec3: 5V @ 3A
• Made in Europe.
• Marshall JTM45 Style
• Universal Primärwicklung

Files:

• Datasheet

Output Transformer, replacement for JTM45 with EL34 / 5881 and KT66

• Pri1: 8 kOhm / CT
• Pri2: 6,6 kOhm / CT
• Sec: 4-8-16 Ohm
• Power: 70 Watt
• Made in Europe
• Inductance Primary 8 kOhm: 660 Henry (@240V,50Hz open circuit)
• Inductance Primary 6,6 kOhm: 540 Henry (@240V,50Hz open circuit)
• Minimum Reproducible Frequency at max power (70W): 20Hz/-3dB
• Re(a-a) 8 kOhm: 185ohm +/-5%
• Re(a-a) 6,6 kOhm: 165ohm +/-5%

Files:

• Datasheet

Technical Data:

• Inductance: 3 H

Files:

• Datasheet

Technical Data:

• Inductance: 10 H

Files:

• Datasheet

Faceplate for TT Amp-Kit PX45

• Farbe: #LG10 gold GLÄNZEND lackiert
• Material: 1.5 mm Acryl Revers
• Front + Rück Blende

Files:

• Template

Set of componentes for building the TT  Marshall® Style JTM45 Guitar Amp - KT66 Model.

Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

• Powertransformer (110,120,230,240V)
• Outputtransformer
• Choke
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switches
• Tubes (12AX7, KT66, 5AR4)
• Fuses & Fuesholder

NOT INCLUDED (Please see "Accessories" Tab for suiteable items)

• Chassis
• Knobs
• Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

Set of componentes for building the TT  Marshall® Style JTM45 Guitar Amp - EL34 Model.

Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

• Powertransformer (110,120,230,240V)
• Outputtransformer
• Choke
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switches
• Tubes (12AX7, EL34, 5AR4)
• Fuses & Fuesholder

NOT INCLUDED (Please see "Accessories" Tab for suiteable items)

• Chassis
• Knobs
• Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

TT PX45 - a  PX18 in combination with the powerstage of the JTM45

Set of componentes for building the TT TT PX45 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

• Transformers
  • Power: tt-jtm45-pw
  • Output: tt-otjtm45D, Dual-Primary
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switches
• Tubes (12AX7 / ECC83 and EL34)
• Fuses & Fuesholder

NOT INCLUDED:

• Headshell
• Chassis ch045
• Knobs
• Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

Output Transformer, replacement for JTM45 with EL34 / 5881 and KT66

• Pri1: 8 kOhm / CT
• Pri2: 6,6 kOhm / CT
• Sec: 4-8-16 Ohm
• Power: 70 Watt
• Made in Europe
• Inductance Primary 8 kOhm: 660 Henry (@240V,50Hz open circuit)
• Inductance Primary 6,6 kOhm: 540 Henry (@240V,50Hz open circuit)
• Minimum Reproducible Frequency at max power (70W): 20Hz/-3dB
• Re(a-a) 8 kOhm: 185ohm +/-5%
• Re(a-a) 6,6 kOhm: 165ohm +/-5%

Files:

• Datasheet

Mica Capacitors

• Voltage Rating:    500 V
• Tolerance: 5%
• Operating Temperature Range: - 50°C / + 150°C
• Termination Style: radial

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Specifications:

• Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
• Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
• Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
• Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
• Self Inductance: 1 nH max. per 1 mm lead and body length
• Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
• Damp Heat Test: 95% RH @ +45 ºC for 21 days
• Soldering: 260 ºC ±5 ºC for 10 s ±1 s
• Long Term Storage Stability: ?C/C = ±3% after 2 years

• Type: Electrolytic capacitor
• Capacitance: 220 µF
• Voltage Rating: 63 V
• Tolerance: - 10 % / +30 %
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 15 mm x 20 mm
• Termination Style: axial

Images are for reference only. See Product Specifications

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Specifications:

• Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
• Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
• Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
• Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
• Self Inductance: 1 nH max. per 1 mm lead and body length
• Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
• Damp Heat Test: 95% RH @ +45 ºC for 21 days
• Soldering: 260 ºC ±5 ºC for 10 s ±1 s
• Long Term Storage Stability: ?C/C = ±3% after 2 years

Color can differ from the picture.

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Specifications:

• Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
• Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
• Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
• Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
• Self Inductance: 1 nH max. per 1 mm lead and body length
• Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
• Damp Heat Test: 95% RH @ +45 ºC for 21 days
• Soldering: 260 ºC ±5 ºC for 10 s ±1 s
• Long Term Storage Stability: ?C/C = ±3% after 2 years

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Specifications:

• Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
• Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
• Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
• Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
• Self Inductance: 1 nH max. per 1 mm lead and body length
• Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
• Damp Heat Test: 95% RH @ +45 ºC for 21 days
• Soldering: 260 ºC ±5 ºC for 10 s ±1 s
• Long Term Storage Stability: ?C/C = ±3% after 2 years

Resistor, Metal Oxide 5 Watt

• +/- 5% tolerance
• -55° C to 240° C operating range
• max 500 V
• Excellent flame retardant coating
• Small Size