Potentiometer Filter

Potentiometer for Marshall JCM800, 22 kOhm log
Potentiometer for Marshall JCM800, 22 kOhm log
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 220 kOhm log
Potentiometer for Marshall JCM800, 220 kOhm log
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 1 MOhm log
Potentiometer for Marshall JCM800, 1 MOhm log
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
Files
1,50 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 100 kOhm linear
Potentiometer for Marshall JCM800, 100 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
Files
2,30 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 4,7 kOhm linear
Potentiometer for Marshall JCM800, 4,7 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
2,20 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer für Marshall JCM900, 10k Stereo
Potentiometer für Marshall JCM900, 10k Stereo

Replacement potentiometer for Marshall JCM900, JCM600 and Valvestate 8XXX-Series
16 mm Body, Splitt Shaft, PCB

5,75 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer für Marshall JCM900, 4,7 k lin
Potentiometer für Marshall JCM900, 4,7 k lin

Replacement potentiometer for Marshall JCM900, JCM600 and Valvestate 8XXX-Series
16 mm Body, Splitt Shaft, PCB

1,80 €

incl. VAT excl. Shipping costs
piece:
 
Marshall Poti Valvestate VSxxx 1 M log
Marshall Poti Valvestate VSxxx 1 M log

Marshall potentiometer for Marshall Valvestate II, Valvestae VS-Series, AVT and JCM2000-Series

6,00 €

incl. VAT excl. Shipping costs
piece:
 
Rheostat Alpha 100 Ohm / 5 Watt
Rheostat Alpha 100 Ohm / 5 Watt

Ideal for balancing heaters
RoHS Compliant

2,80 €

incl. VAT excl. Shipping costs
piece:
 
Rheostat 50 Ohm / 100 Watt
Rheostat 50 Ohm / 100 Watt

High Power Rheostat

  • Rating: 50 Ohms  +/- 10%  @  100 Watt
  • Size: D = 82, H = 40  mm
  • Shaft: D = 6 mm
  • Great for attenuators, power soaks and dummy loads
  • RoHS Compliant
13,50 €

incl. VAT excl. Shipping costs
piece:
 
L-Pad AT-62 mono 100W / 8 Ohm
L-Pad AT-62 mono 100W / 8 Ohm

High-power level control, plastic carrier, mono version, with push-on knob.

Technical Specifications

  • Impedance: 8 Ohm ±20%
  • Attenuation direction: counterclockwise
  • Turning angle: 300° ±5°
  • Attenuation: 0dB up to 8dB
  • Channels: mono
  • Peak current: max. 100W
  • Thread: 10 mm

Files:

27,95 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 100 kOhm log
Potentiometer for Marshall JCM800, 100 kOhm log
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
Files
1,50 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 1k log
TT Potentiometer 16 mm 1k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 500k lin
TT Potentiometer 16 mm 500k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 5k log
TT Potentiometer 16 mm 5k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 10k log
TT Potentiometer 16 mm 10k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 25k log
TT Potentiometer 16 mm 25k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 100k lin
TT Potentiometer 16 mm 100k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 500k log
TT Potentiometer 16 mm 500k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 5k lin
TT Potentiometer 16 mm 5k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 25k lin
TT Potentiometer 16 mm 25k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
TT Potentiometer 16 mm 10k lin
TT Potentiometer 16 mm 10k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 220 kOhm linear
Potentiometer for Marshall JCM800, 220 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

incl. VAT excl. Shipping costs
piece:
 
Potentiometer for Marshall JCM800, 22 kOhm linear
Potentiometer for Marshall JCM800, 22 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
Files
1,50 €

incl. VAT excl. Shipping costs
piece:
 
1 to 24 (from a total of 213)