TT-CK10 Choke 10 H

• Extended JTM45 Chassis
• Size: (WxHxD) 432 x 63 x 170 mm
• PT cut-out: 70 x 69 mm
• Material: 1,5 mm Steel, galvanize
• Made in Germany

Files:

• Datasheet

• Extended JTM45 Chassis
• Size: (WxHxD) 432 x 65 x 170 mm
• PT cut-out: 70 x 69 mm
• Material: 2 mm Aluminium (AllMg3)
• Made in Germany

Files:

• Datasheet

Panel Mount Potentiometer

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M8 (7,8 mm)
• Termination: Solder lugs
• Dimension: 24 mm

• Type: Toggle Switch
• Version: SPDT, ON-ON
• Rating: 3 A / 250VAC, 6 A / 125VAC
• Drill Ø: 6 mm
• Termination Style: solder-lugs

• Tube-Town kit for DC Heater, for schematic check product pictures
• Size PCB: 74,5 mm x 34,3 mm
• The kit includes all parts needed for the complete build

Files

• Board dimensions

• Type: Toggle Switch
• Version: SPST, ON - OFF
• Rating: 15A / 250VAC, 10A / 400VAC
• Contact resistance: 10 mΩ max. at 1A 2VDC
• Insulation resistance: 1.000 MΩ min. at 500VDC
• Dielectric strength: 2.000 Vrms 50 Hz min.
• Operating Life: 10.000 cycles at full load
• Termination Style: solder lug / quick-connect terminals

Files:

• Datasheet

Panel Mount Potentiometer - 3/8"

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: 3/8-32 (9,45 mm)
• Termination: Solder lugs
• Dimension: 24 mm

Metal Oxide Film Resistors

• Termination Style: Axial     
• Power Rating: 5 W     
• Tolerance: 5 %     
• Temperature Coefficient: 350 PPM / C     
• Operating Temperature min/max: - 55 C / + 155 C      
• Voltage Rating: 500 V     
• Diameter: 8,5 mm     
• Length: 25 mm     
• Lead Diameter:  0.75 mm    

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

• Inner diameter ca. 28 mm
• Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

• Pri: 120V, 230V, 240V @ 50Hz
• Sec1: 345V-0-345V @ 175 mA
• Sec2: 6,3 VCT @ 5A
• Sec3: 5 V @ 3A
• Sec4: 12,6 V @ 1A

Made with Grain Oriented Electrical Steel Cores for better magnetic permeability, which leads to

• more efficiency
• more linearity
• less distortion
• and a higher performance

Files:

• Datasheet

• Extended JTM45 Chassis
• Size: (WxHxD) 432 x 65 x 170 mm
• PT cut-out: 70 x 69 mm
• Material: 2 mm Aluminium (AllMg3)
• Made in Germany

Files:

• Datasheet