Main page » Components » Sockets & Retainer » Octal Socket » Socket Octal Belton, Chassis VT8

Socket Octal Belton, Chassis VT8

Mobile Preview: Socket Octal Belton, Chassis VT8

Description

Octal Socket Belton VT8

Version: High quality Micalex socket
Chassis mount
Termination Style: solder lugs
for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

Information about the manufacturer

Herstellerinformationen | Manufacturer Information
Belton Engineering Co.,LTD,
Unit 1208,Daerung Technotown 8,
481-11 Gasan-Dong,
Geumcheon-Gu, Seoul,
KR
https://belton.co.kr/

EU Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de

Customer reviews (4)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Ilya K., 06/22/2021

best sockets i've tried, very good quality and perfomance. they're really tight and don't require retainers in most cases

Needed for:

Tube-Town Turret-Sockel PCB

Supporting PCB to build a turret socket, components can be mounted directly at the socket.

Version 2024
1,6 mm, black solder mask
can be used directly as "eylet board"
turrets for 2mm boards can also be used
the pin distance is more than 2,5 mm
conform with actual VDE regulations
operating voltage 500 V DC
designed for Belton noval and octal sockets
with tabs at the side for mounting on an octal socket, these can be snapped off if not needed
recommended spacer bolts: 30 - 40 mm, M3
check "accesories" for recommended and fitting parts

Note: The easiest way to assemble the components is when no turrets are used.

Files:

Application Notes Turret-PCB

0,95 €

Tube-Town Turret-Sockel PCB - red

Supporting PCB to build a turret socket, components can be mounted directly at the socket.

Version 2024
1,6 mm, red solder mask
can be used directly as "eylet board"
turrets for 2mm boards can also be used
the pin distance is more than 2,5 mm
conform with actual VDE regulations
operating voltage 500 V DC
designed for Belton noval and octal sockets
with tabs at the side for mounting on an octal socket, these can be snapped off if not needed
recommended spacer bolts: 30 - 40 mm, M3
check "accesories" for recommended and fitting parts

Note: The easiest way to assemble the components is when no turrets are used.

Files:

Application Notes Turret-PCB

0,95 €

Customers who bought this product bought also the following products:

Sovtek 12AX7 / ECC83 LPS

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files

Datasheet

19,90 €

Accutronics Reverb Tank 8EB2C1B

Springs: 3
Delay Type: medium
Size: short (9 ¼" / 23,5 cm)
Input Impedance: 800 Ohms
Output Impedance: 2575 Ohms
Mounting: Horizontal Open Side Down
Connectors: Input Insulated - Output Grounded
Accutronics by Accu-Bell, Made in Korea

Suitable for these amplifiers Fender® Blues Jr., Deluxe 90, Princeton 65, Stage Series, Acoustasonic Junior, Vaporizer, Ultimate Chorus, Ultra Chorus, Sidekick Keyboard 60, Sidekick Reverb 35, Super 60, Super 112, Frontman 65R, Eighty-Five, Tech 21® Trademark 30, Epiphone® Valve Junior Hot Rod, Vox® AC15CC, AC15C, Peavey® Envoy 110, Ultra 60/120, Backstage, Valveking and similar models.

25,00 €