Connectors

• not insulated
• Conductor cross section: 1.0 to 2.5 mm²
• AWG conductor cross section AWG 17 to 14
• Brass, tin-plated
• Pack of 10 pcs

• Connection Type: solder connection
• Wire Diameter: up to 2,5 mm2
• Plug Diameter: 4 mm
• Contact materal: nickel-plated brass
• Rated voltage: 60 VDC
• Rated current: max. 30 A
• Contact resistance: 3.0 mOhm

• Connection Type: solder connection
• Wire Diameter: up to 2,5 mm2
• Plug Diameter: 4 mm
• Contact materal: nickel-plated brass
• Rated voltage: 60 VDC
• Rated current: max. 30 A
• Contact resistance: 3.0 mOhm

copper. Finish: tin galvanized. Insulator: colored red

5 pole DIN cable connector, silver plated contacts

• Dielectric strength: 0.5 kVdc
• Insulation resistance: ≥ 1 GΩ
• Rated current: Cable O.D. 5 mm
• Lifetime: > 1000 mating cycles
• Wiresize: 26 mm²
• Contact plating: Nickel
• Contacts: Brass (CuZn39Pb3)
• Shell: Zinc diecast (ZnAl4Cu1)
• Shell plating: Nickel
• Insulation: Thermoplastic
• Bushing: PVC, crimp type Zn plated strain relief
• Solderability: Complies with IEC 68-2-20
• Temperature range: -25 °C to +70 °C

Files:

• Datasheet

5 pole DIN chassis connector, silver plated contacts

• Dielectric strength: 0.5 kVdc
• Insulation resistance: ≥ 1 GΩ
• Cable O.D.: 5 mm
• Lifetime: > 1000 mating cycles
• Contact plating: Au plated
• Contacts: Brass (CuZn39Pb3) , Ni
• Shell: Steel
• Shell plating: Nickel plated
• Solderability: Complies with IEC 68-2-20
• Temperature range: -25 °C to +70 °C

Files:

• Datasheet

Ring Tongue Cable lugs
for cables 0,5 - 1 mm²
Made of tinned electrolyte copper. With crimp terminal.
d = 4,3 mm

Ring Tongue Cable lugs
for cables - 0,5 mm²
Made of tinned electrolyte copper. With crimp terminal.
d = 6,5 mm

• 12-pole
• separable
• made of flexible insulating material
• natural-colored
• with screw terminals on both sides

Screw terminal for print
Pole: 2
Color: gray
Rated current: 13 A
Grid: 5 mm

Screw terminal for print

• Pole: 3
• Color: gray
• Rated current: 15 A
• Grid: 5 mm