Celestion Bass

Celestion BN12-300S

Developed using our unrivalled knowledge of Neodymium magnet structures, Orange Label drivers are highly efficient with fast response times - making them ideal for clean, snappy percussive styles, including slap bass. These efficient speakers feature enhanced mid-range punch to cut through the mix while delivering solid lows.
Equipped with lightweight Neodymium magnets, Orange Label speakers offer a super-fast response, ideal for modern styles where a clean, snappy sound is required.

• Nominal diameter: 12" / 305mm
• Power Rating: 300W
• Sensitivity: 99dB
• Frequency Range: 50-4000Hz
• Voice coil diameter: 2.5" / 63.5mm
• Magnet type: Neodymium
• Weight: 2.0kg/4.4lb

Developed using our unrivalled knowledge of Neodymium magnet structures, Orange Label drivers are highly efficient with fast response times - making them ideal for clean, snappy percussive styles, including slap bass. These efficient speakers feature enhanced mid-range punch to cut through the mix while delivering solid lows.
Equipped with lightweight Neodymium magnets, Orange Label speakers offer a super-fast response, ideal for modern styles where a clean, snappy sound is required.

• Nominal diameter: 304.8mm/12in
• Power rating: 300Wrms
• Nominal impedance: 8Ω
• Sensitivity: 99dB
• Magnet type: Neodymium
• Voice coil diameter: 63.5mm/2.5in
• Coil material: Copper
• Cone material: Kevlar loaded paper
• Former material: Polyimide
• Surround material: Cloth-sealed
• Frequency range: 50-4000Hz
• Xmax: 2.5mm/0.098in
• Gap depth: 8mm/0.31in
• Voice coil winding width: 12.5mm/0.49in

PULSE10
With its robust steel-chassis, PULSE10, provides a rock-solid bass performancewhether alone in a single speaker combo, in a 4x10 or even an 8x10 cab. Expecta tight, punchy low end with a warm mid-range that’s full of presence, bringingfocus and articulation to your playing. This heavy-duty driver truly delivers bassyou can feel as well as hear.

General Specifications

• Nominal diameter: 10", 254mm
• Power rating: 200W
• Nominal impedance: 8Ω
• Sensitivity: 94dB
• Magnet type: Ferrite
• Voice coil diameter: 2", 50.8mm
• Coil material: Copper
• Cone material: Kevlar loaded paper
• Former material: Polyimide
• Surround material: Cloth-sealed
• Frequency range: 45-3500Hz
• Xmax: 0.15", 4mm
• Gap depth: 0.31", 8mm
• Voice coil winding width: 0.62", 16mm

Small Signal Parameters

• D: 0.21m/8.3in
• Fs: 68Hz
• Mms: 32.9g/1.16oz
• Qms: 2.54
• Qes: 0.53
• Mmd: 29.26g/1.03oz
• Qts: 0.44
• Re: 6.03Ω
• Vas: 25.8lt/0.91cu.ft.
• BI: 12.88Tm
• Cms: 0.15mm/N
• Rms: 5.79kg/s
• Le (at 1kHz): 0.92mH

Mounting Information

• Cut-out diameter: 9", 229mm
• Diameter: 10.1", 256mm
• Mounting slot dimensions: 0.24x0.31", 6x8mm Ø
• Mounting slot PCD: 9.6", 245mm
• Number of mounting slots: 4
• Overall depth: 4.3", 110mm
• Unit weight: 6.6lb, 3kg

PULSE12
For bass players demanding well-defined clarity and stunning articulationtogether with a rich, full tone, PULSE12 bass speakers deliver an idealcombination of responsiveness and rock solid low end. The Kevlar-loaded conepulses with up to 200 watts of raw bass power. Expect each note to deliver athick, percussive attack along with the mid-range necessary to break through inany performance situation.

General Specifications

• Nominal diameter: 12", 304.8mm
• Power rating: 200W
• Nominal impedance: 8 Ohm
• Sensitivity: 94dB
• Magnet type: Ferrite
• Voice coil diameter: 2", 50.8mm
• Coil material: Copper
• Cone material: Kevlar loaded paper
• Former material: Polyimide
• Surround material: Cloth-sealed
• Frequency range: 45-3500Hz
• Xmax: 0.15", 4mm
• Gap depth: 0.31", 8mm
• Voice coil winding width: 0.62", 16mm

Small Signal Parameters

• D: 0.26m/10.2in
• Fs: 45Hz
• Mms: 47.6g/1.68oz
• Qms: 2.74
• Qes: 0.49
• Mmd: 40.7g/1.44oz
• Qts: 0.42
• Re: 5.88O
• Vas: 104.6lt/3.7cu.ft.
• BI: 12.71Tm
• Cms: 0.26mm/N
• Rms: 4.92kg/s
• Le (at 1kHz): 1.0mH

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.1", 130mm
• Unit weight: 7lb, 3.2kg

PULSE15
With a longer voice coil for increased ‘throw’ and a multi-roll surround thatprovides exceptional linearity and superb bass extension, the 400-watt PULSE 15 isimpeccably-designed sonic artillery. Featuring a Kevlar-loaded cone and rigid steelchassis designed for maximum energy transfer, this robust and reliable speaker trulyis a powerhouse of deep bass tone.

General Specifications

• Nominal diameter: 15", 381mm
• Power rating: 400W
• Nominal impedance: 8O
• Sensitivity: 96dB
• Magnet type: Ferrite
• Voice coil diameter: 3", 76.2mm
• Coil material: Copper
• Cone material: Kevlar loaded paper
• Former material: Polyimide
• Surround material: Cloth-sealed
• Frequency range: 40-3500Hz
• Xmax: 0.18", 4.75mm
• Gap depth: 0.31", 8mm
• Voice coil winding width: 0.68", 17.5mm

Small Signal Parameters

• D: 0.33m/12.99in
• Fs: 35.7Hz
• Mms: 83.32g/2.94oz
• Qms: 4.75
• Qes: 0.474
• Mmd: 55.06g/1.94oz
• Qts: 0.431
• Re: 5.76O
• Vas: 246.7lt/8.7cu.ft.
• BI: 15.06Tm
• Cms: 0.24mm/N
• Rms: 3.93kg/s
• Le (at 1kHz): 0.87mH

Mounting Information

• Cut-out diameter: 13.8", 351mm
• Diameter: 15.2", 385mm
• Mounting slot dimensions: 0.36x0.24", 9.2x6.2mm Ø
• Mounting slot PCD: 14.5", 369mm
• Number of mounting slots: 8
• Overall depth: 6.4", 162mm
• Unit weight: 10.8lb, 4.9kg

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]