Rubber Grommet for Reverb Tank, 4 pcs

• Springs: 3
• Delay Type: medium
• Size: long
• Replacement: Common

 Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: long
• Size: short
• Input Impedance: 190 Ohm
• Output Impedance: 2575 Ohm
• Replacement: Rivera

• Springs: 3
• Delay Type: medium
• Size: short
• Replacement: JC 120
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender, Marshall, Ampeg "F"
• corresponds to Fender part number 006-4063-049
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: SLM
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: short
• Replacement: Mesa Boogie
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: long
• Size: long
• Input Impedance: 1475 Ohm
• Output Impedance: 2250 Ohm
• Replacement: Music Men

• Springs: 3
• Delay Type: long
• Size: long
• Replacement: Fender
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: long
• Size: short
• Input Impedance: 1925 Ohms
• Output Impedance: 2575 Ohms
• Input Insulated
• Output Grounded
• Horizontal, Open Side Down Mounting Plane
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: medium
• Size: long
• Replacement: Marshall
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: short
• Replacement: Mesa Boogie

• Springs: 3
• Delay Type: medium
• Size: short
• Replacement: SLM
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: short
• Drop in Replacement for these Marshall™ Amps 4100, 4101, 4102, 4500, 4501, 4502, 5150, 5205, 8080, 8100, 8240, AS50, AS50R, AS80R, AVT50, AVT50H, JCM600, JCM602, JTM310, JTM312, JTM610, JTM612, JTM615, JTM622, MA50C, MA100C, MA100H, G25R, G50RCD, VS100R, VS100RH, VS102R, VS230, VS232, VS265, and VS65R

• Springs: 3
• Delay Type: medium
• Size: short
• Input Impedance: 190 Ohm
• Output Impedance: 2575 Ohm

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: VOX
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: short
• Input Impedance: 10 Ohm
• Output Impedance: 12000 Ohm

• Springs: 3
• Delay Type: medium
• Size: short
• Input Impedance: 190 Ohm
• Output Impedance: 2575 Ohm
• Replacement: Gibson, Laney

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender, Marshall, Ampeg "F"
• corresponds to Fender part number 006-4063-049

• Springs: 3
• Delay Type: long
• Size: short
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender Hot Rod Deluxe / DeVille

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender, Marshall, Ampeg
• Input Impedance: 8 Ohms
• Output Impedance: 2250 Ohms
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: long
• Replacement: Peavey
• Accutronics by Accu-Bell, Made in Korea

• Springs: 3
• Delay Type: medium
• Size: long
• Replacement: Fender, Mesa Boogie
• Accutronics by Accu-Bell, Made in Korea

• Springs: 2
• Delay Type: medium
• Size: long (17" / 42,5 cm)
• Input Impedance: 600 Ohms
• Output Impedance: 2250 Ohms
• Replacement: Peavey™ Bravo 112, Encore 65, Classic 30, Backstage 30, Valveking 100, Windsor Studio ( Peavey™ Part# 71011114)

Accutronics by Accu-Bell, Made in Korea

Empty amplifier housing for TT-Chassis #030
The headshell is made of 18 mm Pine Plywood and can be painted or tolexed by the customers to their own ideas. The front and back panel and the holders are not assembled but included. They can get assembled if needed (woodglue is included).
Hardware, such as corners, handles or feet are NOT included.

Note: the side brackets inside are NOT needed when using chassis 036 - model 2020.

Specifications

• Size: 510 x 240 x 240 mm (Outside)
• Hardware: Screws are included.
• Weight: ca. 4 kg
• Wood: 18 mm Pine Plywood
• Dovetail joints
• Made in Germany

[content:3210136]

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender, Marshall, Ampeg "F"
• corresponds to Fender part number 006-4063-049
• Accutronics by Accu-Bell, Made in Korea

Aluminium Chassis 035 for the TT Surfmate Kit

• 2 mm Aluminium
• predrilled
• made for the TT Surfmate kit
• 3 x noval, 1 x octal
• Mounting: with cage nuts (not included)

Files:

• Datasheet

Surf at the maximum !

Set of componentes for building the TT Surfmate. Please visit the >>Project page for more infos about the amp.

INCLUDED:

• Transformers (Power and Output)
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switche
• PSU
• Tubes
• Fuses & Fuesholder

NOT INCLUDED:

• Knobs
• Chassis
• Faceplate
• REVERB TANK

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it than don't build it.

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (ah4023)
• Steel nickel plated
• Internal radius: 12 mm
• 16 x Screws with extra flat head, silver

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

Soldering Iron Tip Cleaner Set

This soldering iron tip cleaner set includes a holder and cleaning wool, providing a convenient solution for keeping your soldering iron tips clean and in top condition. The cleaner effectively removes residue from soldering tools without damaging the tips, ensuring a longer lifespan for your equipment.

Specifications

• Includes holder and cleaning wool
• Enhanced safety and stability with 3 knobs
• Prevents rapid oxidation of the soldering iron tip
• Maintains the temperature of the soldering iron tip

• Type: Flutted Miniatur
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: d=12,8 mm, h = 15,5 mm
• Mounting: Set Screw

Panel Mount Potentiometer

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M8 (7,8 mm)
• Termination: Solder lugs
• Dimension: 24 mm

Metaloxide film resistor

• Nominal Power: 1 Watt
• Max. cont. Working Voltage:: 500 V RMS
• Tolerance: +/- 5%
• Temperature range: -55° C...200° C
• Flame retardant
• Very Small Size
• Size: 6,3 x 2,4 mm