Accutronics Reverb Tank 9EB2C1B

• Rubber grommets for reverb tanks, package of four.
• Mounting Hole Diameter = 3/8"
• Outer Diameter = 1/2"

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

µC loaded with "Looper" programm for the Midi-Kit.
This controller is needed if you want to use the Midi-Kit as Looper.
All outputs can be turned on and off independently.
Firmwareversion 2.x Please see the -> MIDI-Switcher project page for more information.

Files:

• Documentation
• Board Size

Microcontroller-controlled MIDI switcher for channel switching or loop switching. Operation can be performed either via MIDI or a footswitch (momentary switch).

!!! UPDATE !!! With the May 2019 update, the following adjustments were made to the module:

• The large relay board has been removed and is no longer included in the kit, as a wide range of different relays with carrier boards is now available, offering much more flexible applications.
• The documentation has been consolidated and is available as a PDF download directly with the kit.
• The microcontroller with the firmware is no longer included in the kit and must be ordered separately depending on the desired version.

These changes allowed us to offer the kit in a more universal, flexible, and cost-effective way. More short information and software on the >>TT-Midi-Switcher project page

Included in delivery:

• Controller board
• Components for 5V onboard power supply
• MIDI socket
• ULN2803A driver IC
• Optocoupler for MIDI-IN
• Crystal, resistors, and capacitors

NOT included in delivery (order as needed!):

• Relays, relay carrier boards, and flyback diodes
• LEDs and current-limiting resistors
• Buttons and switches
• Cables and wires
• Microcontroller with firmware

Psvane 12AX7 / ECC83 preamp tube from the Classic series with red logo.
Dropin replacement for all 12AX7, ECC83 and 7025 tubes.

[content:3210144]
[content:3210145]

DOUBLE ANODE RECTIFYING TUBE
Suitable for all Hi-Fi and Guitar/Bass amplifiers.

4 tubes, matched as quad

The Sovtek EL84 series produces an unbeatable smooth, warm distortion sound. Excellent replacements in vintage VOX AC-30's and the like, very popular in Fender, Crate and Peavey amps.

4 tubes, matched as quad

Rugged and wonderful-sounding Power Beam tetrode that performs flawlessly at up to 475 volts. Great replacement for single-ended amps such as Fender Champ, or high plate voltage amps like the Fender Deluxe Reverb.

• Specially developed cathode coating
• Tri-alloy plate material
• Carefully aligned grid

6 tubes, matched as sextet

Very credible 6550 so far.
We recommend this 6550 for bass amps which are working with 6550 tubes, especially Ampegs.

Files:

• Datasheet

• Reverb Tank RCA cable
• ca. 48" (120 cm)
• Right-Angle plugs
• Replaces Fender Reverb-Tank RCA cable

VOX® vent small, black
Size ca. 41 x 141,5 mm