Accutronics Reverb Tank 4EB2C1B
Accutronics Reverb Tank 4EB2C1B
Preview: Accutronics Reverb Tank 4EB2C1B
Preview: Accutronics Reverb Tank 4EB2C1B
Accutronics Reverb Tank 4EB2C1B
Accutronics Reverb Tank 4EB2C1B
Accutronics Reverb Tank 4EB2C1B
Mobile Preview: Accutronics Reverb Tank 4EB2C1B
Mobile Preview: Accutronics Reverb Tank 4EB2C1B

Accutronics Reverb Tank 4EB2C1B

Product No.:
ra4eb2c1b
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.68 kg per piece
28,00 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description
  • Springs: 2
  • Delay Type: medium
  • Size: long (17" / 42,5 cm)
  • Input Impedance: 600 Ohms
  • Output Impedance: 2250 Ohms
  • Replacement: Peavey™ Bravo 112, Encore 65, Classic 30, Backstage 30, Valveking 100, Windsor Studio ( Peavey™ Part# 71011114)
Accutronics by Accu-Bell, Made in Korea
Documents
Belton Specifications Type 1 and 4  (16.71 KB)
Manufacturer
Herstellerinformationen | Manufacturer Information
Accu-Bell Sound Inc.
Room #1307
Hanlla Sigma Valley
345-90 Gasang-Dong
Geumcheon-Ku, Seoul
Korea
http://www.accutronicsreverb.com/


EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

Rubber Grommet for Reverb Tank, 4 pcs
Rubber Grommet for Reverb Tank, 4 pcs
  • Rubber grommets for reverb tanks, package of four.
  • Mounting Hole Diameter = 3/8"
  • Outer Diameter = 1/2"
1,70 €

Customers who bought this product bought also the following products:

Retainer EL34 / 6L6
Retainer EL34 / 6L6

Retainer for EL34 / 6L6 Tubes

0,95 €

JJ 6L6 - #16 - Mesa RED
JJ 6L6 - #16 - Mesa RED

JJ 6L6 - #16 - Mesa RED

  • Corresponds to Mesa Color Code RED
  • Price for one tube
FAQ: If I order two or more of these tubes, are they all "matched"?
Yes, the tubes are all "matched" and selected for the above amplifiers.

FAQ: Can I change the tubes myself or does anything need to be adjusted?
Adjustment work is not possible on the above amplifiers (unless a bias adjustment has been retrofitted). The exchange can therefore be done without any adjustment or measurement work.

Files:

31,00 €

JJ EL84 #06 - Peavey Classic 30 / 50, VOX AC30
JJ EL84 #06 - Peavey Classic 30 / 50, VOX AC30

JJ EL84 #06 -Standard

  • Recommended for Peavey Classic 30 / 50, AC30 and similar amps
  • Price for one tube.
FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifiers.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.
18,00 €

F+T 220 µF @ 350 Volt, axial
F+T 220 µF @ 350 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 220 µF
  • Voltage Rating: 350 V
  • Tolerance: - 10%+30%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 25 mm x 38 mm
  • Termination Style: axial
6,30 €

Retainer 12AX7
Retainer 12AX7

Retainer for 12AX7 and tubes with a similar size

0,90 €

Retainer EL84
Retainer EL84

Retainer for EL84 / EL844Tubes

0,80 €

Silicon Tube Damper for 6L6
Silicon Tube Damper for 6L6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 34 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €

Elektrolyt 1 µF @ 100 V
Elektrolyt 1 µF @ 100 V
  • Type: Electrolytic capacitor
  • Capacitance: 1 µF
  • Voltage Rating: 100 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 4,5 mm x 11 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,65 €

F+T 32 + 32 µF / 500 V Multisection
F+T 32 + 32 µF / 500 V Multisection
  • Type: Multisection Capacitor
  • Capacitance: 32 + 32 µF
  • Voltage Rating: 500 V
  • Tolerance: - 10% / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 35 mm x 50 mm
  • Termination Style: radial, solder lugs
8,85 €

F+T 8+8 µF @ 450 Volt, axial
F+T 8+8 µF @ 450 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 8 + 8 µF
  • Voltage Rating: 450 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 25 mm x 39 mm
  • Termination Style: axial
4,75 €

Capacitor Clamp 35 mm
Capacitor Clamp 35 mm

Clamp for capacitors

  • Material: Steel, galvanized
  • Diameter: 35 mm
1,65 €

Case Handle imitation leather, dark blue
Case Handle imitation leather, dark blue
Case Handle imitation leather, Dog-Bone Style
  • Mounting fittings: Steel, nickel plated
  • Color: Dark blue
  • WITHOUT NUTS AND SCREWS
9,95 €

CTS Potentiometer 50 kOhm log, reverse
CTS Potentiometer 50 kOhm log, reverse
  • Type: Panel Mount Potentiometer
  • Power Rating: 0,5 W
  • Voltage Rating: 750 V DC
  • Shaft: 6,10 mm, knurled
  • Shaft length: 15 mm
  • Drill Ø: 9,4 mm
  • Termination: Solder lugs
  • Dimension: 24 mm
3,90 €

EH 12AX7 / ECC83 V1
EH 12AX7 / ECC83 V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

  • The 12AX7EH provides high gain with ultra low noise and detailed, musical tone that rivals the most desirable NOS types.

Files:

24,21 €

Rubber foot with steel insert 38 x 25 mm - Pack of 4
Rubber foot with steel insert 38 x 25 mm - Pack of 4
  • Rubber foot with steel insert
  • Size: d = 38 mm, h = 25 mm
  • Pack of 4
2,85 €