Jensen C10R - 8 Ohms
Jensen C10R - 8 Ohms

Jensen C10R - 8 Ohms

Product No.:
je-5070
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
Stock:
2 piece
RoHs:
conform
Weight:
2.9 kg per piece
55,00 €

incl. VAT excl. Shipping costs

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm
- recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

15,85 €

Wiring Harness, mono, for Loudspeaker / 1
  • Wiring harness for internal speaker connection
  • Number of speakers: 1
  • Type: Mono
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length: ca. 55 cm
12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m
  • Length: 0,5 m
  • Color: grey
  • 1st Jack: Mono 6,3 mm
  • 2nd Jack: Mono 6,3 mm
  • Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)
7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

20,00 €

Wiring Harness, mono, for Loudspeakers / 2
  • Wire Set for internal speaker connection
  • Number of speakers: 2
  • Type: Mono, parallel and serial
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length each ca. 55 cm
16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m
  • with Jack plugs
  • Length: 3 m
  • Cable type: 2 x 1,5 mm²
9,90 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
0,95 €

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Customers who bought this product bought also the following products:

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

JJ 12AX7 / ECC83S Balanced

TT Selection: Balanced
Both systems with balanced gain


Sweet and warm sounding preamp tube with high gain.

21,90 €

Fender Chassis-Straps Medium
  • Mounting hole distance around 101 mm
  • Medium Chrome straps
  • length around 4-5/8" (11.7 cm) end to end
  • mounting screws included
  • For '65 Deluxe, Super, '63 Vibroverb and Vibrolux®
15,35 €

JJ 5U4GB
5U4GB is a directly heated full wave octal base rectifier for Hi-Fi and guitar amplifiers. Suitable for use in any 5U4 socket.
21,20 €

Tube-Town Reverb Tank Bag 17", Black
  • Bag for Reverb Tank
  • Size: 17"  (43cm)
  • Black Tolex


 

14,20 €

Signal wire LiYDY 1 x 0,14 mm², shielded, 1m
  • Signal wire LiYDY 1 x 0,14 mm², shielded
  • Diameter Outside: ca. 2,6 mm
  • Voltage Rating max: 50 / 75 V AC / DC
  • Capacity: ca. 260 pF / m
  • Temperature range: -10 bis +70 C°
  • Conductor resistance: 40 Ohm / km @ 20 C°
  • Test voltage: > 1 kHz
  • IEC 60228/ VDE 0295
  • Length 1 m
1,20 €

Rubber Grommet for Reverb Tank, 4 pcs
  • Rubber grommets for reverb tanks
  • package of four
     
1,70 €

Shield Noval silver
Tube Shield Noval
  • for noval sockets
  • Color: silver
  • High: 55 mm
  • Including Base and Shield
0,95 €

TT-Chassis Fender Style - Princeton Reverb, bare

Fender Princeton Reverb Style Chassis, bare
Without drills and cutouts

  • Size : 463 x 176,3 x 45 mm
  • Material: 2 mm Aluminium
  • Protectionfoil Outside
  • Made in Germany
24,85 €

Capacitor Clamp 40 mm
  • Capacitor Clamp
  • d = 40 mm
2,50 €