Speaker cable, 2 x 6,3 mm plug, 0,5 m - black

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.  
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

Specs:

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter:  1.5"
• Magnet: Ceramic - 35oz
• Weight: 7lbs / 3,17 kg

Dimensions:

• Diameter: 10 3/16" / 258 mm
• Depth rear mount: 4 1/4:
• Cut-out hole diameter:  9"
• Mounting Holes:  1/4"
• Number of mounting holes:  8
• Mounting Hole Circle Diameter:  9 3/4"

Current model from English production!

Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly 'hot-rodded' amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our 'H' magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand- wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 60Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 50oz, 1.42kg
• Frequency range: 70-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: Available 7.3Ω or 12.9Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 6.1", 156mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.3", 135mm
• Unit weight: 10.4lb, 4.7kg

Featured in the world's top selling 4x12 cabinet, the G12T-75 is a high powered rock player's dream.

Built to meet the demands of high gain amplifiers, the G12T-75 combines a huge, tightly controlled low-end and aggressive mid-range with a softened top-end that adds a welcome sweetness to overdrive, distortion and aggressive upper harmonics. These are the characteristics that make the G12T-75 the weapon of choice for Yngwie Malmsteen.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 75Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.77Ω or 12.9Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 127mm
• Unit weight: 7.7lb, 3.5k

The brand new G8A Alnico from Warehouse Guitar Speakers. Highly recommended for the Champ, Vibro Champ, and many other 8" combos.

• Impedance: 8 Ohm
• Power: 20 Watt

Originally re-released a little over a decade ago, the G12H remains hugely popular with players looking to recreate the classic sounds of 60s and 70s rock.

With a strong, aggressive low-end and powerful low-mids, the G12H penetrates any mix with an attacking upper mid-range and an ice-cool top- end. Used singly or in quartets it provides serious attitude to soft amp tones, easily cutting through loud stage levels for chord work, and imparting a hard edge to single notes.

A favourite in the 'boutique' amplifier market, the G12H is often used on its own or paired with a Celestion Blue or Gold for a full-bodied sound that adds ceramic attitude to the chime of an Alnico speaker.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 30Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 50oz, 1.42kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: 6.7Ω and 13.1Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 6.1", 156mm
• Mounting slot dimensions: 0.31",7.9mmØ
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.3", 135mm
• Unit weight: 10.4lb, 4.7kg

The G12M Greenback is perhaps the definitive vintage Celestion ceramic magnet guitar speaker. Developed in the mid-sixties, it was quickly adopted by players like Hendrix, Clapton, Beck and Page, who typified the louder and more aggressive blues rock playing styles that came to characterize that era.The G12M-65 Creamback produces the familiar woody G12M tone, but handles greater power making it ideally suited for today's amps, when a vintage tone is desired. The increased power handling brings with it low end grunt complementing the warm and vocal mid range, crunchy upper- mids and sweet, refined highs.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 65Wrms
• Nominal impedance: 8Ω & 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.7Ω & 13.1Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.9", 150mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 5.1", 130mm
• Unit weight: 7.9lb, 3.6kg

With the Retro 10, we set out to build something with all the qualities we enjoy about our Retro 30 in a 10” speaker. It’s got a tight bottom, an articulate top end, and a nice low-midrange growl. It can be thought of as a distant cousin of the Green Beret 10, but with more low end, slightly more top end, and a shift in midrange characteristics.

Unit weight: 7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 115.58 Hz
• DC Resistance (Re): 6.27 Ohm
• Coil Inductance (Le): 0.17 mH
• Mechanical Q (Qms): 6.72
• Electromagnetic Q (Qes): 0.66
• Total Q (Qts): 0.6
• Compliance Equiv. Vol. (Vas): 16.26 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 10.99 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.39 grams
• Surface Area of Cone (Sd): 324.29 cm squared
• Sound Pressure Level (spl): 100.62 db

Give your listeners a tailored response of a sharp and punchy bottom-end, scooped mids, and soaring highs--keeping you in the fray at the extremes while maintaining a nice sense of sweetness in the middle of your range.

This classic 10" guitar speaker delivers a vintage sound, thanks to an alnico magnet motor that softens the tone without losing the immediacy. In addition, a vintage Kurt Müller paper cone maintains a lush profile, full-bodied sound profile that compliments your playing.

British tone guitar speaker

• 10" (250 mm) steel basket diameter
• 20 watts, 8 ohm, 96 dB SPL
• 1" copper voice coil, Kraft paper former
• 6.8 oz alnico magnet
• Kurt Müller guitar cone
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• Speaker Type: Guitar Speaker
• Application: Musical Instruments
• Environment: Indoor
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 65 - 6,300
• Sensitivity (dB SPL) ¹: 96
• Resonant Frequency (Fs) (Hz): 112
• DC Resistance (Re) (Ω): 6.20
• Voice Coil Inductance (Le) (mH): 0.35
• Mechanical Q Factor (Qms): 18.38
• Electrical Q Factor (Qes): 1.99
• Total Q Factor (Qts): 1.80
• Mechanical Resistance (Rms) (kg/s): 0.61
• Compliance Equivalent Volume (Vas) (L): 28.27
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.61
• Moving Mass (Mms) (gm): 15.84
• Motor Force Factor (BL) (T•M): 5.91
• Efficiency (η₀) (%): 1.93
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 56.48
• Basket Type: Cold-rolled steel
• Terminal Size (mm): 5.2 x 0.5 (Dual lug)
• Voice Coil Diameter (mm): 25.4
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Kraft paper
• Voice Coil Winding Style: Single Layer
• Magnet Material: Alnico
• Magnet Weight (g): 192.77
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Felt

Turn heads with this 8" hempen guitar speaker, the Detroit 820. This model brings out an organic and vintage tweed sound, creating warm and full lows, strong and barky mids, and creamy highs to round out the top end.

The Detroit 820 is the perfect choice for guitarists looking for an upgrade to their blues or rock tone. High sensitivity, a hemp composite cone, a powerful ferrite magnet, dual-lug terminals for easy connectivity, and a sturdy steel basket come together to enhance your style and sound to make you the talk of the town.

American tone guitar speaker

• 8" (203 mm) steel basket diameter
• 20 watts, 4 ohm, 94 dB SPL
• 1" copper voice coil, Kraft paper former
• 10 oz ferrite magnet
• USA-made hemp cone
• Size, Nominal (inch & mm): 8" (203 mm)
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 4
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 4
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 80 - 10,000
• Sensitivity (dB SPL) ¹: 94
• Resonant Frequency (Fs) (Hz): 139
• DC Resistance (Re) (Ω): 3.4
• Voice Coil Inductance (Le) (mH): 0.12
• Mechanical Q Factor (Qms): 15.36
• Electrical Q Factor (Qes): 4.45
• Total Q Factor (Qts): 3.45
• Mechanical Resistance (Rms) (kg/s): 0.47
• Compliance Equivalent Volume (Vas) (L): 10.92
• Suspension Compliance (Cms) (mm/N): 0.16
• Surface Area of Diaphragm (Sd) (cm²): 221.67
• Moving Mass (Mms) (gm): 8.28
• Magnetic Gap Height (mm): 6.0
• Coil Winding Height (mm): 6.35
• Motor Force Factor (BL) (T•M): 2.36
• Efficiency (η₀) (%): 0.64
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 31.46
• Basket Type: Stamped steel with black powder coat
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 283.5
• Cone Body Material: Hemp
• Dust Cap Material: Felt
• Spider Material: Cotton
• Net Weight (kg): 1.01

Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.With its fast attack and tightly controlled low- end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 65Wrms
• Nominal impedance :Available 8Ω or 15Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range:80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.9Ω or 11.8Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 128mm
• Unit weight: 7.7lb, 3.5kg

10" seamed cone speaker with a small alnico motor and a paper voice-coil, upgrade replacement for Jensen P10R.

Dimensions:

• Diameter:  10 1/16"
• Depth rear mount:  4 5/8"
• Cut-out hole diameter:  9"
• Mounting Holes:  1/4"
• Number of mounting holes:  8
• Mounting Hole Circle Diameter:  9 3/4"

Specs:

• Power Handling:  15W
• Voice Coil Diameter:  1"
• Magnet:  Small Alnico - 14oz
• Paper Voice Coil
• Weight:  4lbs

The original G12M of the 1960s was Celestion's first guitar speaker to use a ceramic magnet and paved the way for high power guitar amplifiers. The G12M uses a medium weight magnet to produce a sound that is smooth and warm but bright enough to hold its own against any rock backline.Known simply these days as the 'Greenback', the G12M's fabled 'brown tone' is characterised by a warm, controlled low-end, a rich, vocal mid-range and a delicate, detailed top-end. Loaded into a 4x12 and driven hard, these speakers exude warm, crunchy chords and sweet searing single-notes

General Specifications

• Nominal diameter: 12", 305mm
• Power rating:20Wrms
• Nominal impedance: 8Ω and 15Ω
• Sensitivity: 96dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.57Ω and 12.13Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.9", 150mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.1", 130mm
• Unit weight: 7.9lb, 3.6kg

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker.Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight.You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing. But pick up a cab that’s loaded with Neo Creambacks and you’ll see what makes this speaker truly different.


General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 60W
• Nominal impedance: 8Ω & 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Magnet type: Neodymium
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.6Ω & 13.1Ω
• Voice coil former material: Round copper

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 4.9", 124mm
• Mounting slot dimensions: 0.31", 7.9mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 4.8", 121.5mm
• Unit weight: 4.2lb, 1.9kg

 

Jensen Jet C12 Electric Lightning

Full and powerful sound with a thick but clear low end, balanced mids and crispy but not annoying highs.
A modern sounding speakers, very suitable from clean to overdrive.

Technical Details:    

• Size: 12"
• Impedance: 16 Ohm
• Rated Power (RMS): 70 W
• Sensitivity @ 1 W, 1 m: 99 dB
• Resonance Frequency  fs: 95 Hz

Files:

• Datasheet

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.  
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

Specs:

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter:  1.5"
• Magnet: Ceramic - 35oz
• Weight: 7lbs / 3,17 kg

Dimensions:

• Diameter: 10 3/16" / 258 mm
• Depth rear mount: 4 1/4:
• Cut-out hole diameter:  9"
• Mounting Holes:  1/4"
• Number of mounting holes:  8
• Mounting Hole Circle Diameter:  9 3/4"

Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound.
Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required.

Specifications

• Nominal Diameter: 209 mm / 8 in
• Nominal Impedance: 8 Ω
• Rated Power AES: 150 W
• Continuos Program Power: 300 W
• Sensitivity @ 1W/1m: 95.0 dB
• Voice Coil Diameter: 50 mm (2")
• Voice Coil Winding Depth: 11 mm
• Magnetic Gap Depth: 8 mm
• Flux Density: 1.10 T
• Magnet Weight: 1100 g
• Net Weight: 3.1 Kg
• Magnet Type: Ferrite
• Basket Material: Pressed Sheet Steel
• Voice Coil Winding Material: Copper
• Voice Coil Former Material: Kapton
• Cone Material: Paper
• Cone Treatment: No
• Surround Material: Treated Cloth
• Dust Dome Material: Solid Paper

Thiele & Small Parameters

• Re: 6.08 Ω
• Qms: 3.61
• Qts: 0.33
• Cms: 203 µm/N
• Vas: 13.1 l
• X max: +/- 3.1 mm
• N: 1.45 %
• Fs: 74.7 Hz
• Qes: 0.36
• Mms: 22.4 g
• Bxl: 13.29 Tm
• Sd: 213.8 cm²
• X var: +/- 6.6 mm
• Le (1KHz): 0.71 mH

The Invader 50 is the weeter and creamier version of the hugely popular Green Beret.  It retains all the same great rock and roll character with just a little sweeter top end and breakup.  The beefed up coil means you can now use it with higher wattage amps.  It's time to invade your amp with tone!

Thiele-Small Parameters

• Resonant Frequency (Fs): 82.67 Hz
• DC Resistance (Re): 7.83 Ohm
• Coil Inductance (Le): 0.34 mH
• Mechanical Q (Qms): 10.73
• Electromagnetic Q (Qes):0.81
• Total Q (Qts): 0.76
• Compliance Equiv. Vol. (Vas): 24.13 cu ft
• Mech. Compliance of Susp. (Cms):0.13 mm/N
• BL Product (BL): 12.08 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.20 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.03 db

Vintage American Ceramic Guitar Speaker
10" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C10R.

• Power: 15 W
• Small ceramic magnet
• sensitivity: 96,5 dB
• weight: 1,4 kg
• VC diameter: 1"
• 4 Ohm
• Paper Coil

• Rubber foot with steel insert
• Size: d = 38 mm, h = 20 mm
• Pack of 4
• Screws included

The Eminence Legend 1028K guitar speaker is a classic stage fixture. Vintage American tone with moderate, but tight, percussive lows and extended highs. Hard-working under the bright lights.

Specifications

• Nominal Basket Diameter: 10", 254 mm
• Nominal Impedance*: 8 Ω
• Power Rating*
• Program Power: N/A
• Watts: 35 W
• Resonance: 95 Hz
• Usable Frequency Range: 100 Hz - 5 kHz
• Sensitivity*: 97.4 dB
• Magnet Weight: 6 oz.
• Gap Height: 0.25", 6.4 mm
• Voice Coil Diameter: 1", 25 mm

THIELE & SMALL PARAMETERS

• Resonant Frequency (fs): 95 Hz
• DC Resistance (Re): 5.8 Ω
• Coil Inductance (Le): 0.51m H
• Mechanical Q (Qms): 17.96
• Electromagnetic Q (Qes): 1.61
• Total Q (Qts): 1.47
• Compliance Equivalent Volume (Vas): 31.5 liters / 1.11 cu.ft.
• Peak Diaphragm Displacement Volume (Vd): 72.4 cc
• Mechanical Compliance of Suspension (Cms): 0.19 mm/N
• BL Product (BL): 5.7 T-M
• Diaphragm Mass Inc. Airload (MMs): 15 grams
• Efficiency Bandwidth Product (EBP): 59
• Maximum Linear Excursion (Xmax): 2.1 mm
• Surface Area of Cone (Sd): 344.9 cm2
• Maximum Mechanical Limit (Xlim): N/A

MOUNTING INFORMATION

• Driver Volume Displaced: 0.027 cu.ft. / 0.77 liters
• Overall Diameter: 10.11", 256.8 mm
• Baffle Hole Diameter: 9.13", 231.9 mm
• Front Sealing Gasket: Yes
• Rear Sealing Gasket: N/A
• Mounting Holes Diameter: 0.22", 5.6mm
• Mounting Holes B.C.D.: 9.6", 243.8mm
• Depth: 4.8", 121.9 mm
• Net Weight: 2.9 lbs, 1.32 kg
• Shipping Weight: 4 lbs, 1.81 kgs

MATERIALS OF CONSTRUCTION

• Coil Construction: Copper voice coil
• Coil Former: Polyimide former
• Magnet Composition: Alnico magnet
• Core Details: Non-vented core
• Basket Materials: Pressed steel basket
• Cone Composition: Paper cone
• Cone Edge Composition: Paper cone edge
• Dust Cap Composition: Solid composition felt dust cap

 

Case Handle imitation leather, Dog-Bone Style

• Mounting fittings: Steel, nickel plated
• Color: Red
• WITHOUT NUTS AND SCREWS