Speaker cable, 2 x 6,3 mm plug, 0,5 m

Even and balanced from top to bottom. No sacrifice in tone for using higher power and/or higher gain with this speaker, it is crammed full of balance, definition, and most importantly, control. This speaker plays well with pedals and is slow to break up.

Spezification:

• Nominal Impedance (Z): 8 Ohm
• Rated Power IEC268-5: 90 Watt
• Sensitivity (@1W/1 m): 100 dB/SPL
• Frequency range: 80 – 5000 Hz
• Resonant Frequency (Fs): 85 Hz
• Voice Coil Diameter 1.75”

Files:

• Datasheet

 

The 12” high power Reaper HP™ is designed to go where the 30 watt version couldn't. If you want a good clean tone with just the right amount of breakup at medium-high volume, then this is your speaker. This 50 watt version is both warmer and more powerful than the 30 watt version.

Unit Weight:  10 pounds

Mounting Information

• Diameter: 12.2”
• Overall depth: 5.3”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 101.9 Hz
• DC Resistance (Re): 6.7 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 8.613
• Electromagnetic Q (Qes): 0.7235
• Total Q (Qts): 0.6674
• Compliance Equiv. Vol. (Vas): 1.384 cu ft
• Mech. Compliance of Susp. (Cms): 87.6 mm/N
• BL Product (BL): 13.76 T-M
• Diaphragm Mass Inc. Airload (Mms): 27.8476 grams
• Surface Area of Cone (Sd): 558.645 cm squared
• Sound Pressure Level (spl): 99.42 db

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker.Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight.You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing. But pick up a cab that’s loaded with Neo Creambacks and you’ll see what makes this speaker truly different.


General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 60W
• Nominal impedance: 8Ω & 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Magnet type: Neodymium
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.6Ω & 13.1Ω
• Voice coil former material: Round copper

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 4.9", 124mm
• Mounting slot dimensions: 0.31", 7.9mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 4.8", 121.5mm
• Unit weight: 4.2lb, 1.9kg

 

With a 90-watt power rating, the Celestion Cream is purpose-built for vintage tones, whatever kind of amp you use. By applying new technologies and manufacturing methods developed during the creation of our Creamback speakers, we’ve been able to deliver a higher power rating while preserving the very essence of an alnico guitar speaker.

Delivering a glorious, laid-back attack, the Cream exudes warm lows and a brilliant bell-like chime. It has smooth and organic mids, further characterised by a fine-grained detail that adds a high-definition quality to the vocal range.

The Cream has been specially created to bring alnico class to all kinds of amps from 1-watt to 90-watts. It conveys a satisfying warmth, detailed expressiveness and exceptional musicality, even at low power levels.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 90W
• Nominal impedance: 8Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Alnico
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.7Ω
• Made in UK

Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.With its fast attack and tightly controlled low- end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 65Wrms
• Nominal impedance :Available 8Ω or 15Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range:80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.9Ω or 11.8Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 128mm
• Unit weight: 7.7lb, 3.5kg

Originally re-released a little over a decade ago, the G12H remains hugely popular with players looking to recreate the classic sounds of 60s and 70s rock.

With a strong, aggressive low-end and powerful low-mids, the G12H penetrates any mix with an attacking upper mid-range and an ice-cool top- end. Used singly or in quartets it provides serious attitude to soft amp tones, easily cutting through loud stage levels for chord work, and imparting a hard edge to single notes.

A favourite in the 'boutique' amplifier market, the G12H is often used on its own or paired with a Celestion Blue or Gold for a full-bodied sound that adds ceramic attitude to the chime of an Alnico speaker.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 30Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 50oz, 1.42kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: 6.7Ω and 13.1Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 6.1", 156mm
• Mounting slot dimensions: 0.31",7.9mmØ
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.3", 135mm
• Unit weight: 10.4lb, 4.7kg

Following the great reviews we received for the Gold 12", we realised there was also a need for a speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver.The G10 Gold is the ultimate 10" speaker, blending unmistakable Alnico class with a rich low-end, creamy mid-range and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets. General Specifications

• Nominal diameter: 10", 254mm
• Power rating: 40Wrms
• Nominal impedance: Available 8Ω or 15Ω
• Sensitivity: 98dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Alnico
• Frequency range: 80-6000Hz
• Resonance frequency, Fs: 80Hz
• DC resistance, Re: 6.66Ω and 13.56Ω

Mounting Information

• Cut-out diameter: 9.0", 229mm
• Diameter: 10.1", 256mm
• Magnet structure diameter: 4.7", 119mm
• Mounting slot dimensions: 0.25", 6.5mm Ø
• Mounting slot PCD: 9.6", 244mm
• Number of mounting slots: 8
• Overall depth: 5.3", 135mm
• Unit weight: 6.0lb, 2.7kg

Featured in the world's top selling 4x12 cabinet, the G12T-75 is a high powered rock player's dream.

Built to meet the demands of high gain amplifiers, the G12T-75 combines a huge, tightly controlled low-end and aggressive mid-range with a softened top-end that adds a welcome sweetness to overdrive, distortion and aggressive upper harmonics. These are the characteristics that make the G12T-75 the weapon of choice for Yngwie Malmsteen.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 75Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.77Ω or 12.9Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 127mm
• Unit weight: 7.7lb, 3.5k

Vintage American Ceramic Guitar Speaker
8″ seamed ribbed cone with small ceramic motor, replacement for Jensen C8R.

• Small Ceramic Magnet
• Power: 15 W
• Sensitivity: 94,5dB
• Weight: 1,2 kg
• VC Diameter: 1″
• 8 Ohm
• Paper Coil

The original G12M of the 1960s was Celestion's first guitar speaker to use a ceramic magnet and paved the way for high power guitar amplifiers. The G12M uses a medium weight magnet to produce a sound that is smooth and warm but bright enough to hold its own against any rock backline.Known simply these days as the 'Greenback', the G12M's fabled 'brown tone' is characterised by a warm, controlled low-end, a rich, vocal mid-range and a delicate, detailed top-end. Loaded into a 4x12 and driven hard, these speakers exude warm, crunchy chords and sweet searing single-notes

General Specifications

• Nominal diameter: 12", 305mm
• Power rating:20Wrms
• Nominal impedance: 8Ω and 15Ω
• Sensitivity: 96dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.57Ω and 12.13Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.9", 150mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.1", 130mm
• Unit weight: 7.9lb, 3.6kg

Vintage American Ceramic Guitar Speaker
10" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C10R.

• Power: 25 W
• Small ceramic magnet
• sensitivity: 96,5 dB
• weight: 1,4 kg
• VC diameter: 1"
• 8 Ohm

Vintage American Ceramic Guitar Speaker
12" seamed cone with Large Ceramic Magnet, upgrade replacement for Jensen C12N.

• Magnet: Large Ceramic
• Power: 25 W
• Sensitivity: 99,5 dB
• Weight: 3,4 kgs
• VC Diameter: 1.5″
• 8 Ohm
• Paper Coil

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.  
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

Specs:

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter:  1.5"
• Magnet: Ceramic - 35oz
• Weight: 7lbs / 3,17 kg

Dimensions:

• Diameter: 10 3/16" / 258 mm
• Depth rear mount: 4 1/4:
• Cut-out hole diameter:  9"
• Mounting Holes:  1/4"
• Number of mounting holes:  8
• Mounting Hole Circle Diameter:  9 3/4"

The Ruby is an alnico-magnet guitar speaker that’s purpose-built to create vintage tones – and at 35-watts power handling, it’s ideal for use with mid-powered amps and combos. Bringing the instantly familiar Celestion alnico vibe with its glorious, dampened attack; the Ruby oozes a richly musical vintage warmth, with mellow highs and a smooth, sophisticated midrange.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 35W
• Nominal impedance: 8Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Alnico
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.7Ω

Mounting Information

• Cut-out diameter: 11.1”, 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.0", 128mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 6.5”, 165mm
• Unit weight: 9.3lb, 4.2kg

File:

• Ruby Review

Building on the popularity of our G12C, we developed the G12Q for those times when you want the speaker to add some natural, vintage breakup but maintain clarity.  With a 20 oz magnet and a 1" voicecoil, the G12Q definitely has a vintage American flavor.  We highly recommend it with 5E3 style circuits.

Thiele-Small Parameters

• Resonant Frequency (Fs):91.91 Hz
• DC Resistance (Re): 7.70 Ohm
• Coil Inductance (Le): 0.26 mH
• Mechanical Q (Qms): 20.75
• Electromagnetic Q (Qes): 2.64
• Total Q (Qts): 2.35
• Compliance Equiv. Vol. (Vas): 22.17 cu ft
• Mech. Compliance of Susp. (Cms): 0.12 mm/N
• BL Product (BL): 6.57 T-M
• Diaphragm Mass Inc. Airload (Mms): 25.71 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 95.92 db

Vintage American Ceramic Guitar Speaker
8″ seamed ribbed cone with small ceramic motor, replacement for Jensen C8R.

• Small Ceramic Magnet
• Power: 25 W
• Sensitivity: 94,5dB
• Weight: 1,2 kg
• VC Diameter: 1″
• 16 Ohm

• 6,3 mm jack
• mono
• Installation diameter: 10 mm

Files:

• Datasheet

The 12” ET65™ speakers has big and creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created! This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (pe-c1824n)
• Steel nickel plated
• High Quality
• 16 x Screws with extra flat head, silver

Round dish / ferrule for 6.3 mm jack

• metal
• black powder coated
• incl. 3 screws