Main page » TT-Chassis 063 - LX18 - Octal

TT-Chassis 063 - LX18 - Octal

Mobile Preview: TT-Chassis 063 - LX18 - Octal

Description

Same as the Chassis 040 - PX18 but with with octal sockets for the powertubes, fits in all of our Standard Smallhead and 18W Headcabs and Combos

Size : 432 x 170 x 65 mm
Material: 2 mm Aluminium
Mounting: with cage nuts (not included)

Files:

Datasheet

Manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

TTC Universal Headshell Lemberg 063

The headshell is made of 15 mm Plywood and can be painted or tolexed by the customers to their own ideas. The width is sufficiently large so that the housing can also be covered with Tolex.

Spezification

Size:
- Outside(B x H x T): 467 x 230x 215 mm
fits Chassis: #009 (siehe list bellow)
Hardware: none
Weight: ca. 4 kg
Wood:
- Body: 15 mm Plywood
- Front/Backpanels: Body: 15 mm Plywood
Surface: untreated

Files:

Drawing

[content:3210136]

139,00 €

Cagenut / Screw Mounting kit M6

Mounting kit for all TT-Chassis which are designed for mounting with cagenuts and 19" housings

Included are:

4 x cagenut M6
4 x thread screw M6 x 30

1,95 €

Power Jack IEC320 / C14 w/ fuseholder, Schurter

up to T 70 °C
with one fuse holders 5.0 x 20 mm
Housing: polyamide
UL 94 V-0, black
for panel mounting
Double-pole + protective ground 10 A/250 V
single-pole fusing with bridge to the fuse holder at the L terminal
fuse holder terminals for soldering
Design to IEC/EN 60320-1
fuse holder to IEC/EN 60127-6
Certifications: ENEC, Semko, UL, CSA

4,20 €

Signal lamp, red 230V

Signal lamp square red

Operating voltage: 230 V~
Power: 0,05 W
Light/housing color: red
Connection: soldering lugs
Installation Ø: 10 mm
Installation depth: 35 mm
Overall dimensions (ØxL): 12x42 mm

1,50 €

Grommet 14 mm

Color: black
Size:
- A: 14 mm
- B: 18 mm
- D: 24 mm
- H: 7 mm
- h: 3 mm
Material: soft PVC,UL 94 V-2
Operating temperatures: –30 to +60 °C

0,58 €

Toggle Switch APEM 641 H/2 DPST - ON-OFF

Type: Toggle Switch
Version:DPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

Files:

Datasheet

8,80 €

Toggle Switch APEM 631 H/2 SPST - ON-OFF

Type: Toggle Switch
Version: SPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

Files:

Datasheet

5,95 €

Capacitor Clamp 35 mm

Clamp for capacitors

Material: Steel, galvanized
Diameter: 35 mm

1,65 €

Fuseholder 5x20 mm

Fuseholder, Chassismount, 5x20 mm
IP 40
Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

Files:

Datasheet

1,95 €

Socket Octal Belton, Chassis VT8

Octal Socket Belton VT8

Version: High quality Micalex socket
Chassis mount
Termination Style: solder lugs
for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

2,35 €

Socket Noval Belton, Chassis VT9-ST-2

Type: Noval Socket Belton VT9-ST-2

Version: High quality Micalex socket
Chassis mount
Termination Style: solder lugs
for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

1,75 €

Needed for:

TT-Kit LX18

Set of componentes for building the TT LX18 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

Tube-Town Powertransformer, Primary 0-120-230-240V @ 50/60 Hz
Tube-Town Outputtransformer
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Chassis
Knobs
Faceplate

We use high quality components for this kit, which are all tested. The kit is offered as is. If other components are desired, then these must be purchased in addition to the kit.

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

... check out Captain Crap's YouTube Sounddemo of the LX18