Main page » Laser-Shop » Labels Standard » Label "Impedance", round, black

Label "Impedance", round, black

Description

Material: 1.5 mm transply
Ø-Outside: 42 mm
Color: Black
Letters: White

Manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Needed for:

Rotary Switch 1 Pol / 3 Pos - 3 A - Open Style- Impedance Selector - Kopie

High Power Rotary Switch e.g. for impedance selector switch

open version
1 x 3 Pos, 4-times
Break-before-make
Max. Voltage: 380 VAC / 220 VDC
Max. Current: 3A / 100 VA per contact
Connection solder contacts
Shaft Diameter 6 mm, D-Shaft

The switch has four 1 x 3 Pos switches.
Higher switching capacity can be achieved by parallel connection

5,95 €

Rotary Switch 1-Pol / 3-Pos - 4 A @ 250VAC - Impedance / Voltage Selector

High Power Rotary Switch - Can be used as Voltage or Impedance selector

1 pole / 3 position
Solder lugs
Shaft Diameter 6 mm, D-Shaft
Rating: 250 VAC 6(4) A
Contact Resistance: 100MOhm Max
Dielectric Intensity:
- 1500VAC / 5S for terminal and terminal
- 3000VAC / 5s for terminal and ground
Withstand Voltage: 1500VAC / min
Operating Temperature: -25~85°C
Insulation Resistance: 500 VDC, 100MOhm Min
Electrical Life: 10,000 cycles
Housing material: PA66
Ø: 22 mm
h: 17,0 mm
Ø Frontpanel drill: 10 mm

1,00 €

Rotary Switch 1 Pol / 3 Pos - 3A@250VAC - Impedance / Voltage Selector

High Power Rotary Switch

Can be used as Voltage or Impedance selector
1 pole / 3 position
3 A @ 250 VAC
6 A @ 125 VAC
Solder lugs
Size: 28 mm x 39,5 mm
Frontpanel drill: 10,5 mm
Shaft Diameter 6 mm, D-Shaft

8,90 €

Customers who bought this product bought also the following products:

Mojotone Anthem 8" / 15 W / 8 Ohm

A huge part of being a musician is being intentional about your work. This concept can apply to sound, songwriting, aesthetic, and even gear selection; which goes hand-in-hand with the philosophy behind our Anthem Series Speakers. Each speaker in our Anthem Series waspurpose-built to optimize their overall power and functionality without compromising their finely-tuned classic American-voiced tone.
After hundreds of hours of research, parts selection, and testing, we’re confident we have outfitted each of these speaker baskets with their perfect paper, voice coil, and magnet counterparts. Straight-seamed ribbed cones, were chosen for their superior performance and unmatched tone, and top-shelf voice coils and magnets have been carefully paired to each of their respective speaker cone sizes.

Technical Data:

Size: 8" Speaker
Voice Coil: 1" Voice Coil
Magne:t 10 oz Ceramic Magnet
Power Handling: 15 Watts
Efficiency: 91 db
Voice Coil Type: Nomex voice coil

Files:

Datasheet

49,00 €

Kit Tube FX-Loop 6112

Kit of an active, serial tube-driven FX-Loop (with parallel option) for a subsequent installation in an existing tube amplifier
The FX-Loop works with one 6112 miniature tube in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

Heater:
6,3 V @ 300 mA

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

36,00 €