Main page » Speaker » by manufacturers » Jensen » C-Series Ceramic » Jensen C12N - 8 Ohms

Jensen C12N - 8 Ohms

CERAMIC Vintage

The JENSEN® "C" series speakers were developed because the world's supply of cobal (Co in AlNiCo) slump, making this raw material more expensive. While ceramic magnets are larger in size than comparable AlNiCo magnets of the same gauss strenght, their cost is lower. "C" series JENSEN® speakers use same cones and voice coils comparable to our AlNiCo series speakers, thus providing a similar tone but at a reduced price.

Technical Details:

Size: 12"
Impedance: 8 Ohm
Rated Power (RMS): 50 W
Sensitivity @ 1 W, 1 m: 98,4 dB
Resonance Frequency fs: 112 Hz

Files:

Datasheet

Safety Information

Safety Instructions according to the Product Safety Act (ProdSG)

General Information

CE conformity is only guaranteed if the product is installed properly.
Warranty becomes void in case of improper use.
The operator is responsible for proper installation and safe operation.
Do not exceed the specified rated power.

Hazard Warnings

Risk of high sound levels: Prolonged exposure may cause permanent hearing damage.
Risk of overheating: Insufficient ventilation may lead to fire or product failure.
Risk of magnetic fields: May affect medical implants and electronic data carriers.

Manufacturer

Herstellerinformationen | Manufacturer Information

SICA Altoparlanti S.r.l.
via Galileo Galilei 20
60012 Trecastelli (AN)
Italy
info@sica.it

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Wiring Harness, mono, for Loudspeaker / 1

Wiring harness for internal speaker connection
Number of speakers: 1
Type: Mono
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length: ca. 55 cm

12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m

TT Cable Speaker Cable

Length: 0,5 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]