TT Diffusor 12" - Standard
TT Diffusor 12" - Standard

TT Diffusor 12" - Standard

Product No.:
tt-diff12
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
1 kg per piece
15,85 €

incl. VAT excl. Shipping costs

Needed for:

Jensen C8R - 8 Ohms

CERAMIC Vintage

The JENSEN® "C" series speakers were developed because the world's supply of cobal (Co in AlNiCo) slump, making this raw material more expensive. While ceramic magnets are larger in size than comparable AlNiCo magnets of the same gauss strenght, their cost is lower. "C" series JENSEN® speakers use same cones and voice coils comparable to our AlNiCo series speakers, thus providing a similar tone but at a reduced price.

Technical Details:    

  • Size: 8"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m:    92,7 dB
  • Resonance Frequency  fs: 125 Hz

Files:

60,00 €

Celestion G15V-100 Fullback - 15" / 100 W / 8 Ohm - MADE IN UK
With a larger cone delivering an extended low end response the 100-watt Fullback has a big deep voice delivering smooth and expressive tones seemingly without effort.
While retaining our classic harmonically complex and finely detailed mid-range the larger 15 cone of the Fullback shifts this characteristic down a register. Clean sounds are warm and expressive revealing and enhancing the
qualities of your amp and guitar without unnecessary colouration. Overdrive sounds are complex and musical; push harder for a weighty contralto growl with a softer warmer mid-range.
Incorporating an eight hole chassis the Fullback is the ideal choice whether you’re looking for the perfect upgrade for your 15 combo or you’re looking for an interesting tonal alternative to a 12 guitar speaker.

Specifications
  • Nominal diameter 381mm / 15"
  • Power rating 100W
  • Rated impedance 8Ω or 16Ω
  • Sensitivity 99dB
  • Chassis type Pressed steel
  • Magnet type Ceramic
  • Magnet weight 1.42kg / 50oz
  • Voice coil diameter 2in / 50mm
  • Voice coil material Round copper
  • Frequency range 65-4000Hz
  • Resonance frequency, Fs 85Hz
  • DC resistance, Re 6.4Ω
Mounting Information
  • Cut-out diameter 351mm / 13.8in
  • Diameter 385mm / 15.2in
  • Magnet structure diameter 156mm / 6.1in
  • Mounting hole dimensions 9.2x7.9mm / 0.36x0.24in
  • Mounting hole PCD 369mm / 14.6in
  • Number of mounting holes 8
  • Chassis depth (inc gasket) 117mm / 4.58in
  • Magnet depth 36mm / 1.42in
  • Overall depth 152.9mm / 6.0in
  • Unit weight 4.8kg / 10.6lb
170,00 €

Celestion A-Type - 12" / 50W / 16 Ohm
Celestion guitar speakers have been an important part of British guitar tone since the birth of Rock & Roll.
Traditionally they’re known for lively and vocal midrange character with plenty of sparkle and chime which turns into an exciting growl when overdriven often compressing when pushed hard.
Inspired by our favourite modern American tones the A-Type is a different kind of guitar speaker from Celestion.
Of course it still has the musical and revealing three- dimensional quality that is the heart and soul of a Celestion guitar speaker however it
features a more laid-back midrange which reveals body and complexity in the upper register accompanied by full and rounded low frequencies.

The A-Type conveys a fluid even performance with an increased headroom threshold that allows your amp’s tone to shine through.
Clean players will love the smooth articulation; for rockers the brooding powerful low end threatens thunder that’s only a heavy riff away!

Specifications
  • Nominal diameter 305mm / 12in
  • Power rating 50W
  • Rated impedance 8Ω or 16Ω
  • Sensitivity 98dB
  • Chassis type Pressed steel
  • Magnet type Ceramic
  • Magnet weight 0.99kg / 35oz
  • Voice coil diameter 1.75in / 44mm
  • Voice coil material Round copper
  • Frequency range 75-5000Hz
  • Resonance frequency, Fs 75Hz
  • DC resistance, Re 6.2Ω&12.7Ω

Mounting Information
  • Cut-out diameter 283mm / 11.1in
  • Diameter 309mm / 12.2in
  • Magnet structure diameter 145mm / 5.7in
  • Mounting hole dimensions 7.9mm / 0.31in Ø
  • Mounting hole PCD297mm / 11.7in
  • Number of mounting holes 8
  • Chassis depth (inc gasket) 94mm / 3.70in
  • Magnet depth 33mm / 1.30in
  • Overall depth 130mm / 5.1in
  • Unit weight 3.5kg / 7.7lb
109,00 €

Jensen P8R - 8 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 8"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m:    92,5 dB
  • Resonance Frequency  fs: 130 Hz
  • Bell: No Bell

Files:

94,00 €

Jupiter 8SA 8" / 25 W / 4 Ohm - AlNiCo -  Kapton Coil

Vintage American AlNiCo Guitar Speaker

Jupiter 8SA is an 8" seamed cone speaker with a Small Alnico Magnet, an upgrade replacement for Jensen P8R.

  • Small Ceramic Magnet
  • Power: 25 W
  • Sensitivity: 94,5dB
  • Weight: 1,2 kg
  • VC Diameter: 1″
  • 4 Ohm
  • Kapton Coil
130,00 €

Jensen Jet Blackbird 12" / 100 W / 8 Ohm

Great dynamics, very rich harmonic texture, plenty of warmth, sparkling highs. Warm, smooth and distortion-friendly tone. Deep, fat low end, open, burnished mids and airy, silvery highs. Firm, authoritative and solid, handles well overdrive, bringing out colorful details and holding strong even at maximum distortion. Good definition with lots of high gain. Full-bodied and detailed with clean tones.
Versatile, successfully merging modern and vintage flavours. Can be used in small combos, for very clean, warm sound, and in powerful amps, for well controlled break-up.

Technical Details:    

  • Size: 12"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 100 W
  • Sensitivity @ 1 W, 1 m:    98 dB
  • Resonance Frequency  fs: 95,1 Hz

Files:


 
249,00 €

Jensen P12R - 12" / 25 W / 4 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 12"
  • Impedance: 4 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m: 95 dB
  • Resonance Frequency  fs: 80 Hz
  • Bell: No Bell

Files:

109,00 €

Jensen P12R - 12" / 25 W / 16 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 12"
  • Impedance: 16 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m: 95 dB
  • Resonance Frequency  fs: 80 Hz
  • Bell: No Bell

Files:

109,00 €

Customers who bought this product bought also the following products:

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Gasket for 12" speakers
  • Foam gasket
  • 4 segements = 1 Ring
  • for 12" guitar and bass speakers
  • Original Celestion
2,90 €

Flat Cable-Plug, Cable Shoe 5,2 x 0,5 mm, Pack of 10
Flat Cable-Plug, Cable Shoe, crimp connection for width max 5,2 x 0,5 mm
  • not insulated
  • Conductor cross section: 1.0 to 2.5 mm²
  • AWG conductor cross section AWG 17 to 14
  • Brass, tin-plated
  • Pack of 10 pcs
1,10 €
0,11 € per Pack

Self tap screw 4.2 X 16 mm black, 25 pcs.
  • Self tap screw
  • flange head
  • 4.2 x 16 mm, black
  • Extra Flat - ideal for the mounting of the corners
  • Pack with 25 pcs.
2,75 €
0,11 € per Piece

Self tap screw 4,5 X 19 mm black
  • Self tap screw
  • flange head
  • DIN 968
  • 4.5 x 19 mm, black
  • Extra Flat - ideal for the mounting of the corners
0,22 €

Wood screw, Pozi drive 3.9x25 mm, black 100 pcs
Dry wall / wood screw
  • with fine thread
  • phosphated, black-gray
  • 3,9 x 25, Stahl
  • PH 2
  • Pack of 100
1,90 €
0,02 € per Piece

Knob Fender Style Vintage, cream
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
2,75 €

Knob Fender Style Vintage, grey
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
1,50 €

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

14,75 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
1,48 €