Main page » Speaker » by manufacturers » Jensen » P-Series AlNiCo » Jensen P10R FENDR - 8 Ohms

Jensen P10R FENDR - 8 Ohms

Mobile Preview: Jensen P10R FENDR - 8 Ohms

Description

The P10R-F was designe in cooperation with Fender for the reissue of the Fender Bandmaster.
The main difference compared with the original P10R is the lower sensitivity of 92,5 dB and the much lower resonance frequency of 87,3.
Also the top end is smoother and less harsh which makes the speaker a little bit softer in tone.

Technical Details:

Files:

Datasheet

Safety Information

Safety Instructions according to the Product Safety Act (ProdSG)

General Information

CE conformity is only guaranteed if the product is installed properly.
Warranty becomes void in case of improper use.
The operator is responsible for proper installation and safe operation.
Do not exceed the specified rated power.

Hazard Warnings

Risk of high sound levels: Prolonged exposure may cause permanent hearing damage.
Risk of overheating: Insufficient ventilation may lead to fire or product failure.
Risk of magnetic fields: May affect medical implants and electronic data carriers.

Manufacturer

Herstellerinformationen | Manufacturer Information

SICA Altoparlanti S.r.l.
via Galileo Galilei 20
60012 Trecastelli (AN)
Italy
info@sica.it

Customer reviews (1)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Arne H., 02/12/2018

Best new speaker for the classic harmonica amp sound 2018 February. You can stop looking overseas on expensive so called hand made speakers with harp caps and stuff that only killing the life in your tone. This is very close to the original speakers of a Bassman 59 as it was. If you cup is tight they have a huge fat & dirty sound with a creamy high end. With a loose cup they have a natural and shimmering harp sound. Not as loud as many new speakers but they allow you to turn the volume up and let the amp work properly. caps and stuff that only killing the life in your tone. This is very close to the original speakers of a Bassman 59 as it was. If you cup is tight they have a huge fat & dirty sound with a creamy high end. With a loose cup they have a natural and shimmering harp sound. Not as loud as many new speakers but they allow you to turn the volume up and let the amp work properly.
go to post

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Wiring Harness, mono, for Loudspeaker / 1

Wiring harness for internal speaker connection
Number of speakers: 1
Type: Mono
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length: ca. 55 cm

12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m

TT Cable Speaker Cable

Length: 0,5 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]