Jensen Bass Punch BP8/150 - 8" / 150 W / 8 Ohm

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

• Wiring harness for internal speaker connection
• Number of speakers: 1
• Type: Mono
• Wire: 2 x 1,5 mm² red - black
• Jack socket / speaker crimps
• Length: ca. 55 cm

• Length: 0,5 m
• Color: grey
• 1st Jack: Mono 6,3 mm
• 2nd Jack: Mono 6,3 mm
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

• Wire Set for internal speaker connection
• Number of speakers: 2
• Type: Mono, parallel and serial
• Wire: 2 x 1,5 mm² red - black
• Jack socket / speaker crimps
• Length each ca. 55 cm

• Length: 3 m
• Color: grey
• 1st Jack: Mono 6,3 mm
• 2nd Jack: Mono 6,3 mm
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grau (#so415-0056)

• 4 x Screw M5x20mm
• 4 x Washer M5
• 4 x T-Nut M5

• Wiring Harness, mono, speaker crimps
• Wire: 2 x 1,5 mm² red - black
• Speaker Crimps on both sides
• Length: ca. 55 cm

• Rubber foot with steel insert
• Size: 38 x 10 mm
• Pack of 4
• Screws included

• Faceplate for TT Kit BFlex
• Color: #C14 silver / black
• Material: 1.5 mm Transply
• Set includes front and rear Panel

Files:

• Template

Kit Parallel / Serial Patch-Box

Everybody knows the problem: two speaker cabs but only one output - what do do ?
Use the TT Parallel / Seriell Patchbox and you can connect two speaker-cabs in parallel or in serial with your amp.

Assembly kit with all needed parts.

T-Nut M6
Pack with 8 pcs.

T-Nut M5
Pack with 100 pcs.

• Length: 0,5 m
• Color: black
• 1st Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• 2nd Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

• Wiring harness for internal speaker connection
• Number of speakers: 2
• Type: Mono, parallel and serial
• Wire: 2 x 1,5 mm² red - black
• Right angle jack plug / speaker crimps
• Length: ca. 2 * 55 cm

• Length: 1 m
• Color: black
• 1st Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• 2nd Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)