Socket Noval Ceramic, Chassis w/ mounting bracket

Tube Shield Noval

• for noval sockets
• Color: red
• High: 55 mm
• Including Base and Shield

Tube Shield Noval

• for noval sockets
• Color: yellow
• High: 55 mm
• Including Base and Shield

Tube Shield Noval

• for noval sockets
• Color: black
• High: 55 mm
• Including Base and Shield

Tube Shield Noval

• for noval sockets
• Color: blue
• High: 55 mm
• Including Base and Shield

Tube Shield Noval

• for noval sockets
• Color: silver
• High: 55 mm
• Including Base and Shield

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

Premium medium-Mu Twin Triode for use in preamplifier.

TT Selection: Balanced
Both systems with balanced gain

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

• Operation Voltage: 5 V
• Angle of radiation: 60 °
• Current: 13 mA
• Luminous intensity: 8 mcd
• Wavelength: 625 nm
• Size: 3 mm
• Color: red
• Lens: red

• Core M6
• Primary: 120-230V-240V @ 50Hz
• Secondary HT and bias, 300V-50V-0-300V @ 300mA
• Secondary Heater: 3.15V-0-3.15V @ 6A

Files:

• Datasheet

This item is discontinued. Please take item gc-ma-631

Texture and color just like the Marshall Cane and Orange Weaves, only slightly thinner and thus easier to handle.
Furthermore, the mesh size is a little wider, and therefore the damping of the highs is much less compared with the original fabrics.

• Size (W x L): ca. 70 x 100 cm (only available in this size)
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

A huge part of being a musician is being intentional about your work. This concept can apply to sound, songwriting, aesthetic, and even gear selection; which goes hand-in-hand with the philosophy behind our Anthem Series Speakers. Each speaker in our Anthem Series was purpose-built to optimize their overall power and functionality without compromising their finely-tuned classic American-voiced tone. After hundreds of hours of research, parts selection, and testing, we’re confident we have outfitted each of these speaker baskets with their perfect paper, voice coil, and magnet counterparts. Straight-seamed ribbed cones, were chosen for their superior performance and unmatched tone, and top-shelf voice coils and magnets have been carefully paired to each of their respective speaker cone sizes.

Technical Data:

• Size 12" Speaker
• Voice Coil 1.5" Voice Coil
• Magnet 30 oz Ceramic Magnet
• Power Handling 50 watts
• Efficiency 99 dB
• Voice Coil Type Nomex voice coil
• Weight 5.73lbs

Files:

• Datasheet

PULSE12
For bass players demanding well-defined clarity and stunning articulationtogether with a rich, full tone, PULSE12 bass speakers deliver an idealcombination of responsiveness and rock solid low end. The Kevlar-loaded conepulses with up to 200 watts of raw bass power. Expect each note to deliver athick, percussive attack along with the mid-range necessary to break through inany performance situation.

General Specifications

• Nominal diameter: 12", 304.8mm
• Power rating: 200W
• Nominal impedance: 8 Ohm
• Sensitivity: 94dB
• Magnet type: Ferrite
• Voice coil diameter: 2", 50.8mm
• Coil material: Copper
• Cone material: Kevlar loaded paper
• Former material: Polyimide
• Surround material: Cloth-sealed
• Frequency range: 45-3500Hz
• Xmax: 0.15", 4mm
• Gap depth: 0.31", 8mm
• Voice coil winding width: 0.62", 16mm

Small Signal Parameters

• D: 0.26m/10.2in
• Fs: 45Hz
• Mms: 47.6g/1.68oz
• Qms: 2.74
• Qes: 0.49
• Mmd: 40.7g/1.44oz
• Qts: 0.42
• Re: 5.88O
• Vas: 104.6lt/3.7cu.ft.
• BI: 12.71Tm
• Cms: 0.26mm/N
• Rms: 4.92kg/s
• Le (at 1kHz): 1.0mH

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.1", 130mm
• Unit weight: 7lb, 3.2kg

• Soft Recovery Ultrafast Rectifier
• Maximum repetitive peak reverse voltage: 1000V
• Maximum average forward rectified current: 3,0 A

Files:

• Datasheet

• Type: Electrolytic can capacitor
• Capacitance: 47 µF
• Voltage Rating: 450 V
• Tolerance: - 20 % / +20 %
• Operating Temperature Range: - 25°C / + 105 °C
• Dimensions: Ø 16 mm x 25 mm
• Termination Style: radial
• Grid: 7,5

Images are for reference only. See Product Specifications

• Type: Electrolytic can capacitor
• Capacitance: 220 µF
• Voltage Rating: 450 V
• Tolerance: - 20 % / +20 %
• Operating Temperature Range: - 40°C / + 105 °C
• Dimensions: Ø 30 mm x 35 mm
• Termination Style: radial, Snap-In

Images are for reference only. See Product Specifications