NEW IN TOWN


Fender-Stil Eyeletboard, blank,  black, 406 x 76 x 1,5 mm
NEW
Fender Style Fiberboard black

Black fiberboard material that can be used to create your own fiberboards or flatwork. Simply drill the necessary holes for eyelets, cut them to the desired lengths, and assemble your custom components.

Specifications:
  • 1 x 0.06" thick vulcanized black fiberboard (isolation board). Size: 16" x 3"
6,55 €

Sovtek 12AX7 / ECC83 LPS - V1
NEW
TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)


Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.
24,90 €

JJ 12AX7 / ECC83S Selected GOLD - PAIR
NEW
TOP
TT Selection: PAIR, 2 tubes
All systems with balanced gain


All JJ preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.
72,00 €

JJ 12AX7 / ECC83S Selected GOLD - Balanced
NEW
TT Selection: Balanced
Balanced gain on both systems


All JJ preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.
35,50 €

JJ 12AX7 / ECC83S Selected GOLD - V1
NEW
TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)


All JJ preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.
35,50 €

Solder / Solder Wire, Lead-free , ø 1.0 mm, 100 g
NEW
Solder wire lead-free, ø 1.0 mm, 100 g
Composition: 0.3% silver, 0.7% copper, 99% tin, flux content: 2.5%, melting point 217 °C
Suitable for soldering work on electrical components and devices such as printed circuit boards, PCBs, SMDs, DIP components, cables, televisions, headphones or microphones. The integrated flux ensures particularly convenient and effective soldering.
23,30 €
0,23 € per Pack

Transparent pixel
HOT SALES


Grillcloth Fender-Style Snow-White - 60 x 90 cm - B-STOCK
-50%

B-STOCK: with flaws in the fabric

Fender Style Grillcloth in white. To get the best results with this grillcloth you should not color the baffle black.
Same texture and material as the Fender Cloth

  • Size: ca. 60 x 90 cm (only available in this size)
  • Fender Style
  • Material: 100% Polypropylen
  • Price per pcs.
  • Actual shades may vary.
Further information and notes on Grillcloth
Old price: 29,80 €
Only 14,90 €
27,59 € per m²
Offer valid until: 21.04.2026"
Tolex Tube-Town Black - 3 m
-21%
  • Width: 1.15 m
  • Length: 3 m
  • REACH compliant

Actual shades may vary.

Material:

  • 80% PVC Film
  • 20% Poly-Cotton Fibre


REACH compliant

Old price: 49,90 €
Only 39,00 €
13,00 € per m
Offer valid until: 28.04.2026"
EH 6CA7- PAIR
-18%

2 tubes, matched as pair

Designed to the exacting specifications of the Philips 6CA7. The 6CA7EH is built to withstand today's high-gain amps while still retaining the detailed tone and component integrity of the original.

Old price: 59,80 €
Only 49,00 €
24,50 € per Piece
Offer valid until: 28.04.2026"
EH 6CA7- QUAD
-16%

4 tubes, matched as quad

Designed to the exacting specifications of the Philips 6CA7. The 6CA7EH is built to withstand today's high-gain amps while still retaining the detailed tone and component integrity of the original.

Old price: 119,00 €
Only 99,80 €
24,95 € per Piece
Offer valid until: 28.04.2026"
Tolex Tube-Town Black - 5 m
-26%
  • Width: 1.15 m
  • Length: 5 m
  • REACH compliant

Actual shades may vary.

Material:

  • 80% PVC Film
  • 20% Poly-Cotton Fibre


REACH compliant

Old price: 79,90 €
Only 59,00 €
11,80 € per m
Offer valid until: 28.04.2026"
Sovtek 12AX7 / ECC83 WA
-20%

The Sovtek 12AX7WA is a defacto standard in 12AX7 tubes for many years yet because of its high dependability and its low noise floor.

Old price: 18,50 €
Only 14,80 €
Offer valid until: 28.04.2026"
Grillcloth Tube-Town Cream Weave - 70 x 100 cm - B-Stock
-49%

B-STOCK: could have flaws in weaving

Texture and color just like the Marshall Cane and Orange Weaves, only slightly thinner and thus easier to handle.
Furthermore, the mesh size is a little wider, and therefore the damping of the highs is much less compared with the original fabrics.

  • Size (W x L): ca. 70 x 100 cm (only available in this size)
  • Material: 100% treated paper
  • Price per pcs.
  • Actual shades may vary.
Further information and notes on Grillcloth
Old price: 19,80 €
Only 9,95 €
14,21 € per m²
Offer valid until: 12.05.2026"
Transparent pixel
Our Recommendations


Tung-Sol 12AX7 / ECC83 Reissue
TOP
Premium high gain Twin Triode featuring ultra-low microphonics, and a big, warm and very musical soundstage. Performance surpassing NOS original in all areas.
23,90 €

JJ 12AX7 / ECC83S Selected GOLD - PAIR
NEW
TOP
TT Selection: PAIR, 2 tubes
All systems with balanced gain


All JJ preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.
72,00 €

EH 7025  (12AX7 / ECC83 HQ) - Balanced
TOP

TT Selection: Balanced
Both systems with balanced gain

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

24,80 €

TT E83CC (12AX7 / ECC83 / 7025) - V1
TOP

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)


Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
25,90 €

TT E83CC (12AX7 / ECC83 / 7025) - Balanced
TOP

TT Selection: Balanced
Both systems with balanced gain


Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
25,90 €

TT E83CC (12AX7 / ECC83 / 7025) - Standard
TOP

Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
22,90 €

Transparent pixel