EH 7025 (12AX7 / ECC83 HQ) - Balanced
EH 7025 (12AX7 / ECC83 HQ) - Balanced
EH 7025 (12AX7 / ECC83 HQ) - Balanced
TOP

EH 7025 (12AX7 / ECC83 HQ) - Balanced

Product No.:
eh7025-b
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.018 kg per piece
27,80 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description

TT Selection: Balanced
Both systems with balanced gain

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

Information about the manufacturer
Herstellerinformationen | Manufacturer Information
  • Sovtek
  • Electro Harmonix
  • Tung-Sol (Reissue)
  • Svetlana (Reissue)
  • Genalex (Reissue)
  • Mullard (Reissue)
New Sensor Corporation, 32-33 47th Avenue, Long Island City, NY 11101, USA

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Recommended products:

Socket Noval Ceramic, Chassis w/ mounting bracket
Socket Noval Ceramic, Chassis w/ mounting bracket
  • Type: Noval Socket
  • Version: Ceramic Chassis mount
  • w/ mounting bracket
  • Termination Style: solder lugs
  • for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.
0,75 €

Socket Noval Ceramic w/mounting bracket - GOLD
Socket Noval Ceramic w/mounting bracket - GOLD
  • Type: Noval Socket
  • Version: Ceramic Chassis mount
  •   w/ mounting bracket Gold
  • Termination Style: solder lugs Gold
  • for Tube Type: 12AX7, 12AT7, 12AU7, EL84,
  •   EZ81, EL844 etc.
1,29 €

Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 22 mm
  • Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,45 €

Customers who bought this product bought also the following products:

EH EL34 - QUAD
EH EL34 - QUAD

4 tubes, matched as quad

Mullard reincarnated. With the new EL34EH, Marshall amp owners can recreate the balanced tone, deep, tight bass, sweet mids, and well-defined highs of the original equipment Mullards. Innovative design and precision construction give the EL34EH exceptionally smooth and an ideal balance of pleasing even-order harmonics while virtually eliminating undesirable odd-order harmonics.

 

Files:

109,00 €
27,25 € per Piece

Sovtek 12AX7 / ECC83 LPS
Sovtek 12AX7 / ECC83 LPS

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files

19,90 €

EH 7025 (12AX7 / ECC83 HQ)
EH 7025 (12AX7 / ECC83 HQ)
Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.
21,80 €