Sovtek 12AX7 / ECC83 LPS - V1
Sovtek 12AX7 / ECC83 LPS - V1
Sovtek 12AX7 / ECC83 LPS - V1

Sovtek 12AX7 / ECC83 LPS - V1

Product No.:
so12ax7lps-v1
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.018 kg per piece
24,90 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
EU legal guarantee notice
Description

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files

Safety Information
Safety Information for Vacuum Tubes

For all electrical, electromechanical and mechanical components, the specifications and operating parameters arising from the respective type standard generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information

  • NOT SUITABLE FOR CHILDREN - choking hazard due to small parts
  • NOT SUITABLE FOR UNTRAINED PERSONS - danger to life due to high voltages
  • The safety and processing requirements applicable to the component must be observed
  • CE conformity applies only when installed professionally
  • Warranty becomes void in case of improper handling
  • The operator is responsible for proper installation
  • Local regulations and VDE provisions must be complied with
  • Never exceed the rated power
  • Never exceed the rated voltages and currents

Required Expertise

  • Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
  • Safe handling of high voltages (up to 500V and more)
  • Reading and understanding circuit diagrams
  • Selection of appropriate tools
  • Knowledge of electrical components and their characteristics
  • First-aid knowledge for electrical accidents
  • Knowledge of VDE regulations and safety requirements

Amplifier Tubes

  • Hazard due to high voltages
  • Hazard due to very high heat generation
  • Hazard due to glass breakage
  • Hazard due to UV radiation in case of defective tubes
Manufacturer
Herstellerinformationen | Manufacturer Information
  • Sovtek
  • Electro Harmonix
  • Tung-Sol (Reissue)
  • Svetlana (Reissue)
  • Genalex (Reissue)
  • Mullard (Reissue)
New Sensor Corporation, 32-33 47th Avenue, Long Island City, NY 11101, USA

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Accutronics Reverb Tank 9AB2C1B
Accutronics Reverb Tank 9AB2C1B
  • Springs: 3
  • Delay Type: medium
  • Size: long
  • Replacement: Fender, Mesa Boogie
  • Accutronics by Accu-Bell, Made in Korea
29,90 €
Tube-Clip Octal
Tube-Clip Octal

Socket Clamp / Tube Retainer fits for many octal base tubes.

0,75 €
Sovtek 6L6 WXT+ STR430 - QUAD
Sovtek 6L6 WXT+ STR430 - QUAD

4 tubes, matched as quad

The 6L6WXT+ features larger plate dimensions and 20 percent higher output than the Sovtek 5881WXT. Extremely low noise and a excellent detailed and harmonic sound, plenty of power and very easy to handle - even while using in "hot" setups.

128,00 €
32,00 € per Piece
Silver-plated copper wire, 1 mm² / 5 m
Silver-plated copper wire, 1 mm² / 5 m
  • Silver-plated Copper wire
  • Wire diameter 1 mm²
  • Length: 5 m
5,10 €
1,02 € per m
Silver-plated copper wire, 0,8 mm / 7 m
Silver-plated copper wire, 0,8 mm / 7 m
  • Silver-plated Copper wire
  • Wire diameter 0.8 mm
  • Length: 7 m
5,10 €
0,73 € per m
Wire Silicon 0,5 mm² black, 100 m spool
Wire Silicon 0,5 mm² black, 100 m spool
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures: –50 bis +180 °C
  • Packing: 100 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
35,95 €
0,36 € per m
Silicon Tube Damper for 6L6
Silicon Tube Damper for 6L6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 34 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €
Silicon Tube Damper for 6V6
Silicon Tube Damper for 6V6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 28 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €
Wire Silicon 0,5 mm² red, 100 m spool
Wire Silicon 0,5 mm² red, 100 m spool
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures: –50 bis +180 °C
  • Packing: 100 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
35,95 €
0,36 € per m
Wire Silicon 0,5 mm² white, 100 m spool
Wire Silicon 0,5 mm² white, 100 m spool
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures: –50 bis +180 °C
  • Packing: 100 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
35,95 €
0,36 € per m
Wire Silicon 0,5 mm² blue, 100 m spool
Wire Silicon 0,5 mm² blue, 100 m spool
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures: –50 bis +180 °C
  • Packing: 100 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
35,95 €
0,36 € per m
JJ 12AX7 / ECC83S Balanced
JJ 12AX7 / ECC83S Balanced

TT Selection: Balanced
Both systems with balanced gain

Sweet and warm sounding preamp tube with high gain. We recommend this tube for guitar/bass amps.

Files:

23,90 €
JJ ECC832 / 12DW7
JJ ECC832 / 12DW7

COMBINATED DOUBLE TRIODE
ECC832 is 12DW7 pre-amplifying double triode. It combines 12AX7 and 12AU7, where the 12AX7 is used as 1st stage and the 12AU7 as 2nd stage.

Files:

20,80 €
Tung-Sol 6V6 Reissue - PAIR
Tung-Sol 6V6 Reissue - PAIR
2 tubes, matched as pair

Totally Tweed! The preferred OEM tube of ’50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps – plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6’s. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!

Files:

64,50 €
32,25 € per Piece
Sovtek 5AR4 / GZ34
Sovtek 5AR4 / GZ34

Rectifier

23,80 €