JJ 12AX7 / ECC83S Selected GOLD - V1
JJ 12AX7 / ECC83S Selected GOLD - V1
NEW

JJ 12AX7 / ECC83S Selected GOLD - V1

Product No.:
jj12ax7-gv1
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.014 kg per piece
35,50 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

JJ 5AR4 / GZ34
DOUBLE ANODE RECTIFYING TUBE
Suitable for all Hi-Fi and Guitar/Bass amplifiers.
23,50 €

JJ 12AT7 / ECC81 Selected GOLD

All JJ gold preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound ? It is still the famouse and well known JJ brownsound - warm and smooth.

Files:

30,00 €

JJ 12AX7 / ECC83S Selected GOLD - PAIR
TT Selection: PAIR, 2 tubes
All systems with balanced gain


All JJ preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.
72,00 €

Orange Drop 716 0,015 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,00 €

Capacitor Polypropylene 0,0068 µF @ 630 V
Metallized Polypropylene capacitor
  • Voltage Rating: 630 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 40°C / + 85°C
  • radial
  • self-healing
  • non inductive
0,32 €

NF Signal wire 2 x 0,14 mm² shielded, 5m
NF Signal wire LiYDY 2 x 0,14 mm² shielded
  • Diameter Outside: ca. 4 mm
  • Voltage Rating max. 250 V
  • Temperature range: -10 bis +70 C°
  • Conductor resistance: 135 Ohm / km @ 20 C°
  • Insulation resistance: min. 20 MOHm x km @ 20 C°
  • Length: 5m
4,95 €
0,99 € per m

Mallory 150's 0,022 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,67 €

SoZo Blue Molded 0.022 µF / 500 V

SoZo BlueMolded Vintage Capacitors™

The BlueMolded line of capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders™. These capacitors amazingly capture vintage Fender tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era.

5,85 €

Sovtek 12AX7 / ECC83 LPS - V1
TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)


Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.
24,90 €