WGS Veteran 10 10" / 20 W / 4 Ohm
WGS Veteran 10 10" / 20 W / 4 Ohm
WGS Veteran 10 10" / 20 W / 4 Ohm
Preview: WGS Veteran 10 10" / 20 W / 4 Ohm
Preview: WGS Veteran 10 10" / 20 W / 4 Ohm
Preview: WGS Veteran 10 10" / 20 W / 4 Ohm
WGS Veteran 10 10" / 20 W / 4 Ohm
Mobile Preview: WGS Veteran 10 10" / 20 W / 4 Ohm
Mobile Preview: WGS Veteran 10 10" / 20 W / 4 Ohm
Mobile Preview: WGS Veteran 10 10" / 20 W / 4 Ohm

WGS Veteran 10 10" / 20 W / 4 Ohm

Product No.:
wgs-2602
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
Stock:
3 piece
RoHs:
conform
Weight:
1.85 kg per piece
69,00 €

incl. VAT excl. Shipping costs

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm
- recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

15,85 €

Wiring Harness, mono, for Loudspeaker / 1
  • Wiring harness for internal speaker connection
  • Number of speakers: 1
  • Type: Mono
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length: ca. 55 cm
12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m
  • Length: 0,5 m
  • Color: grey
  • 1st Jack: Mono 6,3 mm
  • 2nd Jack: Mono 6,3 mm
  • Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)
7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

20,00 €

Wiring Harness, mono, for Loudspeakers / 2
  • Wire Set for internal speaker connection
  • Number of speakers: 2
  • Type: Mono, parallel and serial
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length each ca. 55 cm
16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m
  • with Jack plugs
  • Length: 3 m
  • Cable type: 2 x 1,5 mm²
9,90 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
0,95 €

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Customers who bought this product bought also the following products:

Mallory 150's 0,0022 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
1,35 €

Coaxial RF cables with Teflon insulation RG 187 - 1 m
  • Inner conductor diameter: 0.30 mm, Staku stranded wire silver-plated
  • Outer conductor: silver-plated copper braid
  • Operating voltage: max. 1000 V
  • Length: 1 m
5,30 €

Fender Shpinx Glides, set of 4 incl. screws
11,65 €

TTC Aluminiumfoil, self-adhesive
  • Aluminiumfoil, self-adhesive
  • Size: 550 x 300 mm
3,20 €
19,39 € per m²

Bulb 6,3 Volt / #47  Base BA9s

for Fender Pilot-Light

  • BA9s
  • #47
  • 6,3 V
0,70 €