TT Diffusor 12" - Standard
TT Diffusor 12" - Standard

TT Diffusor 12" - Standard

Product No.:
tt-diff12
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
1 kg per piece
15,85 €

incl. VAT excl. Shipping costs

Needed for:

Jensen C8R - 4 Ohm

CERAMIC Vintage

The JENSEN® "C" series speakers were developed because the world's supply of cobal (Co in AlNiCo) slump, making this raw material more expensive. While ceramic magnets are larger in size than comparable AlNiCo magnets of the same gauss strenght, their cost is lower. "C" series JENSEN® speakers use same cones and voice coils comparable to our AlNiCo series speakers, thus providing a similar tone but at a reduced price.

Technical Details:    

  • Size: 8"
  • Impedance: 4 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m:    92,7 dB
  • Resonance Frequency  fs: 125 Hz

Files:

60,00 €

Jensen C12K - 8 Ohms

CERAMIC Vintage

The JENSEN® "C" series speakers were developed because the world's supply of cobal (Co in AlNiCo) slump, making this raw material more expensive. While ceramic magnets are larger in size than comparable AlNiCo magnets of the same gauss strenght, their cost is lower. "C" series JENSEN® speakers use same cones and voice coils comparable to our AlNiCo series speakers, thus providing a similar tone but at a reduced price.

Technical Details:    

  • Size: 12"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 100 W
  • Sensitivity @ 1 W, 1 m:    99,1 dB
  • Resonance Frequency fs: 104 Hz

Files:

125,00 €

Jensen P12Q - 12" / 40 W / 8 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 12"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 40 W
  • Sensitivity @ 1 W, 1 m:    95 dB
  • Resonance Frequency  fs: 90,4 Hz
  • Bell: No Bell

Files:

139,00 €

Celestion Bass PULSE 15 15" / 400 W / 8 Ohm
PULSE15
With a longer voice coil for increased ‘throw’ and a multi-roll surround thatprovides exceptional linearity and superb bass extension, the 400-watt PULSE 15 isimpeccably-designed sonic artillery. Featuring a Kevlar-loaded cone and rigid steelchassis designed for maximum energy transfer, this robust and reliable speaker trulyis a powerhouse of deep bass tone.

General Specifications
  • Nominal diameter: 15", 381mm
  • Power rating: 400W
  • Nominal impedance: 8O
  • Sensitivity: 96dB
  • Magnet type: Ferrite
  • Voice coil diameter: 3", 76.2mm
  • Coil material: Copper
  • Cone material: Kevlar loaded paper
  • Former material: Polyimide
  • Surround material: Cloth-sealed
  • Frequency range: 40-3500Hz
  • Xmax: 0.18", 4.75mm
  • Gap depth: 0.31", 8mm
  • Voice coil winding width: 0.68", 17.5mm

Small Signal Parameters
  • D: 0.33m/12.99in
  • Fs: 35.7Hz
  • Mms: 83.32g/2.94oz
  • Qms: 4.75
  • Qes: 0.474
  • Mmd: 55.06g/1.94oz
  • Qts: 0.431
  • Re: 5.76O
  • Vas: 246.7lt/8.7cu.ft.
  • BI: 15.06Tm
  • Cms: 0.24mm/N
  • Rms: 3.93kg/s
  • Le (at 1kHz): 0.87mH

Mounting Information
  • Cut-out diameter: 13.8", 351mm
  • Diameter: 15.2", 385mm
  • Mounting slot dimensions: 0.36x0.24", 9.2x6.2mm Ø
  • Mounting slot PCD: 14.5", 369mm
  • Number of mounting slots: 8
  • Overall depth: 6.4", 162mm
  • Unit weight: 10.8lb, 4.9kg
165,00 €

Jupiter 8SA 8" / 25 W / 8 Ohm - AlNiCo -  Kapton Coil
NEW

Vintage American AlNiCo Guitar Speaker

Jupiter 8SA is an 8" seamed cone speaker with a Small Alnico Magnet, an upgrade replacement for Jensen P8R.

  • Small Ceramic Magnet
  • Power: 25 W
  • Sensitivity: 94,5dB
  • Weight: 1,2 kg
  • VC Diameter: 1″
  • 8 Ohm
  • Kapton Coil
130,00 €

Customers who bought this product bought also the following products:

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Gasket for 12" speakers
  • Foam gasket
  • 4 segements = 1 Ring
  • for 12" guitar and bass speakers
  • Original Celestion
2,90 €

Flat Cable-Plug, Cable Shoe 5,2 x 0,5 mm, Pack of 10
Flat Cable-Plug, Cable Shoe, crimp connection for width max 5,2 x 0,5 mm
  • not insulated
  • Conductor cross section: 1.0 to 2.5 mm²
  • AWG conductor cross section AWG 17 to 14
  • Brass, tin-plated
  • Pack of 10 pcs
1,10 €
0,11 € per Pack

Self tap screw 4.2 X 16 mm black, 25 pcs.
  • Self tap screw
  • flange head
  • 4.2 x 16 mm, black
  • Extra Flat - ideal for the mounting of the corners
  • Pack with 25 pcs.
2,75 €
0,11 € per Piece

Self tap screw 4,5 X 19 mm black
  • Self tap screw
  • flange head
  • DIN 968
  • 4.5 x 19 mm, black
  • Extra Flat - ideal for the mounting of the corners
0,22 €

Wood screw, Pozi drive 3.9x25 mm, black 100 pcs
Dry wall / wood screw
  • with fine thread
  • phosphated, black-gray
  • 3,9 x 25, Stahl
  • PH 2
  • Pack of 100
1,90 €
0,02 € per Piece

Knob Fender Style Vintage, cream
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
2,75 €

Knob Fender Style Vintage, grey
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
1,50 €

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

14,75 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
1,48 €