Knob Chickenhead Mini creame
Knob Chickenhead Mini creame
Knob Chickenhead Mini creame
Preview: Knob Chickenhead Mini creame
Preview: Knob Chickenhead Mini creame
Preview: Knob Chickenhead Mini creame
Knob Chickenhead Mini creame
Mobile Preview: Knob Chickenhead Mini creame
Mobile Preview: Knob Chickenhead Mini creame
Mobile Preview: Knob Chickenhead Mini creame

Knob Chickenhead Mini creame

Product No.:
kmc-cr
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.004 kg per piece
0,80 €

incl. VAT excl. Shipping costs

Needed for:

TT-Kit 5Ä3 - MKII - Upgrade Kit
TT 5Ä3 Upgrade Kit - to upgrade 5Ä3 version MkI to MkII
More details about the upgrade as well as schematic and layout can be found on the >>Project page.

INCLUDED:
  • Resistors
  • Capacitors
  • Wires
  • Board
To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !
15,00 €

Customers who bought this product bought also the following products:

Fender Pilot Light Assemply / Lamp Holder

Replacment for Fender Amps

  • Chassis Hole: 17,5 mm
  • Threading: 9/16 - 24
6,30 €

Wire Silicon 0,5 mm² - brown
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures:    –50 bis +180 °C
  • Packing:: 5 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
2,90 €
0,58 € per m

Wire Silicon 0,5 mm² - red
Wire Silicon, SiAF
  • Insulation: Silicon
  • Operation Voltage: 500 V
  • Test Voltage: 2000 V
  • Operating temperatures:    –50 bis +180 °C
  • Packing:: 5 m
  • Cross-Section: 0,5 mm²
  • Outer Diameter: 2,1 mm
  • Stranded wire structure: 16 x 0,20 mm, tinned copper
2,90 €
0,58 € per m

Hammond 261D6 for Fender Power 125P24A
For 1964 Blackface 6G15 Reverb , Fender Part No. 125P24A & export
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Files:

54,00 €

Orange Drop 6PS-Series 0,02 µF / 600 V
ORANGE DROP®, PS Series
  • Type: Polyester Film Capacitor
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
1,65 €

Polypropylene Capacitor, axial, 630V, 0.01uF
  • MPW axial leaded metallized polypropylene film capacitors
  • Self Healing
  • Low ESR
  • Tolerance: +10% @ 1 kHz, 25°C
  • Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
  • Size: Ø 6,5 x 14,5 mm
  • Dielectric: Polypropylene
  • Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)
0,98 €