Jupiter 12LC-P 12" / 25 W / 8 Ohm - Paper Coil

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

• Wiring harness for internal speaker connection
• Number of speakers: 1
• Type: Mono
• Wire: 2 x 1,5 mm² red - black
• Jack socket / speaker crimps
• Length: ca. 55 cm

• Length: 0,5 m
• Color: grey
• 1st Jack: Mono 6,3 mm
• 2nd Jack: Mono 6,3 mm
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

• Wire Set for internal speaker connection
• Number of speakers: 2
• Type: Mono, parallel and serial
• Wire: 2 x 1,5 mm² red - black
• Jack socket / speaker crimps
• Length each ca. 55 cm

• Length: 3 m
• Color: grey
• 1st Jack: Mono 6,3 mm
• 2nd Jack: Mono 6,3 mm
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grau (#so415-0056)

• 4 x Screw M5x20mm
• 4 x Washer M5
• 4 x T-Nut M5

• Wiring Harness, mono, speaker crimps
• Wire: 2 x 1,5 mm² red - black
• Speaker Crimps on both sides
• Length: ca. 55 cm

Blackface amplifier logo includes mounting screws and is designed for the following amplifiers: Super-Sonic series, "94 Twin-Amp, Pro Reverb, Prosonic, Concert Reverb, "65 Twin Reverb, "65 Deluxe Reverb, "65 Super Reverb, Machete, "65 Princeton Reverb, "64 Vibroverb, "68 Custom Princeton, "68 Custom Twin Reverb, "68 Custom Deluxe Reverb, Steel King, Jazz King, Cyber Twin, VM series, Princeton Recording Amp, Bassman Pro series, Stage 1000, Deluxe 900, Princeton 650.

• Bag for Reverb Tank, Size: 17"  (43cm),
• Black Tolex
• Made in Germany
   

• Threading: 9/16 - 24

Replacment for Fender Amps

• Chassis Hole: 17,5 mm
• Threading: 9/16 - 24

• Mounting hole distance around 101 mm
• Medium Chrome straps
• length around 4-5/8" (11.7 cm) end to end
• mounting screws included
• For '65 Deluxe, Super, '63 Vibroverb and Vibrolux®

• Wiring harness for internal speaker connection
• Type: Mono / 1 Speaker
• Wire: 2 x 1,5 mm² red - black
• Hicon HI-J63MA05 Angled Jack / speaker crimps
• Length: ca. 55 cm

Totally Tweed! The preferred OEM tube of ’50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps – plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6’s. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!

Files:

• Datasheet

• Made in Russia
• Long Plate

• TT Selection: PAIR, 2 tubes
• All systems with balanced gain
• Made in Russia
• Long Plate

• Rubber foot with steel insert
• Size: d = 38 mm, h = 33 mm