Jensen P12R - 12" / 25 W / 16 Ohms
Jensen P12R - 12" / 25 W / 16 Ohms

Jensen P12R - 12" / 25 W / 16 Ohms

Product No.:
je-6070
<font color =  green><b>available in short term</b></font></br>Leadtime ca.1 Week* available in short term
Leadtime ca.1 Week* 
RoHs:
conform
Weight:
3.8 kg per piece
109,00 €

incl. VAT excl. Shipping costs

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm
- recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Wiring Harness, mono, for Loudspeaker / 1
  • Wiring harness for internal speaker connection
  • Number of speakers: 1
  • Type: Mono
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length: ca. 55 cm
12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m
TT Cable Speaker Cable
  • Length: 0,5 m
  • Color: grey
  • 1st Jack: Mono 6,3 mm
  • 2nd Jack: Mono 6,3 mm
  • Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)
7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]
20,00 €

Wiring Harness, mono, for Loudspeakers / 2
  • Wire Set for internal speaker connection
  • Number of speakers: 2
  • Type: Mono, parallel and serial
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length each ca. 55 cm
16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m
Speaker-Cable
  • Length: 3 m
  • Color: grey
  • 1st Jack: Mono 6,3 mm
  • 2nd Jack: Mono 6,3 mm
  • Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grau (#so415-0056)
9,90 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
1,48 €

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Customers who bought this product bought also the following products:

Hammond 291AEX for Fender Power 125P1B / 022772 UPGRADE Champ
  • Universal Primary: 120/220/230/240V 50/60 Hz
  • Powertransformer for (Bronco, AA764, AB764, Blackface, Silverface) (Champ, Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface) (Harvard, 6G10) (Princeton Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A) (Princeton, Brown, AA964, Blackface, Silverface) (Princeton Reverb, AA1164, AA764, B1270, Blackface, Silverface)
  • Fender Part Number 125P1B and 022772
  • 291AEX uses high grade 29M6 magnetic steel laminations for reduced losses, more surge output power, cooler operation & longer life.

Files:

129,10 €

JJ 12AT7 / ECC81

JJ's version of the ECC81/12AT7 tube type with a warm and soft sound. Often used for phase inverters or reverb drivers.

Files:

14,90 €

JJ 5U4GB

FULL - WAVE VACUUM RECTIFIER
5U4GB is a directly heated full wave octal base rectifier for Hi-Fi and guitar amplifiers. Suitable for use in any 5U4 socket.

Files:


 
21,20 €

JJ 40+20+20+20 µF @ 500 V
  • Type: Cancap
  • Capacitance: 40 + 20 + 20 + 20 µF
  • Voltage Rating: 500 V
  • Tolerance: -10 % / +30 %
  • Operating Temperature Range: - 25°C / + 70 °C
  • Dimensions: Ø 40 mm x 50 mm
  • Termination Style: radial, solder-lugs
18,00 €