Fender Style Pilot Light Assemply / Lamp Holder

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

for Fender Pilot-Light

• BA9s
• #47
• 6,3 V @ 0,15 A

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Tube-Town 5F6A Fender-Style Chassis

• Size: 508 x 126 x 67 mm
• Material: 1,5 mm Steel, hot-dip galvanized
• without silkscreen printing
• including capacitor cover
• cornerd welded
• Made in Germany

Files:

• Datasheet

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

Fender® style lamp jewels

• Threading: 9/16 - 24

4 tubes, matched as quad

The 6L6WXT+ features larger plate dimensions and 20 percent higher output than the Sovtek 5881WXT. Extremely low noise and a excellent detailed and harmonic sound, plenty of power and very easy to handle - even while using in "hot" setups.

• Silver-plated Copper wire
• Wire diameter 1 mm²
• Length: 5 m

• Silver-plated Copper wire
• Wire diameter 0.8 mm
• Length: 7 m

Wire Silicon, SiAF

• Insulation: Silicon
• Operation Voltage: 500 V
• Test Voltage: 2000 V
• Operating temperatures: –50 bis +180 °C
• Packing: 100 m
• Cross-Section: 0,5 mm²
• Outer Diameter: 2,1 mm
• Stranded wire structure: 16 x 0,20 mm, tinned copper

Wire Silicon, SiAF

• Insulation: Silicon
• Operation Voltage: 500 V
• Test Voltage: 2000 V
• Operating temperatures: –50 bis +180 °C
• Packing: 100 m
• Cross-Section: 0,5 mm²
• Outer Diameter: 2,1 mm
• Stranded wire structure: 16 x 0,20 mm, tinned copper

Wire Silicon, SiAF

• Insulation: Silicon
• Operation Voltage: 500 V
• Test Voltage: 2000 V
• Operating temperatures: –50 bis +180 °C
• Packing: 100 m
• Cross-Section: 0,5 mm²
• Outer Diameter: 2,1 mm
• Stranded wire structure: 16 x 0,20 mm, tinned copper

Wire Silicon, SiAF

• Insulation: Silicon
• Operation Voltage: 500 V
• Test Voltage: 2000 V
• Operating temperatures: –50 bis +180 °C
• Packing: 100 m
• Cross-Section: 0,5 mm²
• Outer Diameter: 2,1 mm
• Stranded wire structure: 16 x 0,20 mm, tinned copper

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

TT Selection: Balanced
Both systems with balanced gain

Sweet and warm sounding preamp tube with high gain. We recommend this tube for guitar/bass amps.

Files:

• Datasheet

COMBINATED DOUBLE TRIODE
ECC832 is 12DW7 pre-amplifying double triode. It combines 12AX7 and 12AU7, where the 12AX7 is used as 1st stage and the 12AU7 as 2nd stage.

Files:

• Datasheet

Rectifier