Fender Jewel green

Replacment for Fender Amps

• Chassis Hole: 17,5 mm
• Threading: 9/16 - 24

Replacment for Fender Amps

• Chassis Hole: 17,5 mm
• Threading: 9/16 - 24

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with  two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

• Documentation

• Rubber foot with steel insert
• Size: d = 30 mm,  h = 15 mm
• Pack of 4
• Screws included

• Threading: 9/16 - 24

for Fender Pilot-Light

• BA9s
• #47
• 6,3 V
• LED
• red

for Fender Pilot-Light

• BA9s
• #47
• 6,3 V
• LED
• green

for Fender Pilot-Light

• BA9s
• #47
• 6,3 V
• LED
• blue

• Signal wire LiYDY 1 x 0,5 mm², shielded
• Diameter Outside: ca. 3,2 mm
• Voltage Rating max: 250 V
• Capacity: ca. 260 pF / m
• Temperature range: -10 bis +70 C°
• Conductor resistance: 40 Ohm / km @ 20 C°
• Test voltage: > 1 kHz
• IEC 60228/ VDE 0295
• Length: 2 m

Soldering remover, high-grade special copper alloy, flux saturated

• Width: 2 mm
• Length:5 feet

• Threading: 9/16 - 24

• 2+1 Solder lugs
• lugs brass, tinned