Main page » Speaker » by manufacturers » Celestion » Celestion Classic » Celestion Peacekeeper - 12" / 50 W / 8 Ohm - 86 dB

Celestion Peacekeeper - 12" / 50 W / 8 Ohm - 86 dB

Mobile Preview: Celestion Peacekeeper - 12" / 50 W / 8 Ohm - 86 dB

Celestion Peacekeeper - 12" / 50 W / 8 Ohm - 86 dB

Product No.:: ce-T6683
: In stock for immediate delivery. Delivery time depends on the destination country*
Stock:: 3 piece
RoHs:: conform
Weight:: 6 kg per piece

239,00 €

incl. 19% tax excl. Shipping costs

piece:

Quantity

The Peacekeeper is a revolutionary new attenuating speaker for guitarists from Celestion. It’s the simplest and most toneful way of being able to dial your amplifier right up to its “sweet spot”, while keeping the decibel levels down.

Featuring a unique dual voice coil design, this attenuating speaker works together with an amp, like a conventional guitar speaker, only with significantly reduced output sensitivity. Enabling you to drive your amplifier harder while still listening at reasonable volume levels. Load it into your cab and the Peacekeeper will attenuate your amplifier in the most natural way possible, with zero additional colouration or tonal compromise.

General Specifications

Mounting Information

Cut-out diameter: 11.1", 283mm
Diameter: 12.2", 309mm
Magnet structure diameter: 6.1", 156mm
Mounting slot dimensions: 0.31", 7.9mm Ø
Mounting slot PCD: 11.7", 297mm
Number of mounting slots: 4
Overall depth: 5.3", 135mm
Unit weight: 10.6lb, 4.8kg

Safety Information

Safety Instructions according to the Product Safety Act (ProdSG)

General Information

CE conformity is only guaranteed if the product is installed properly.
Warranty becomes void in case of improper use.
The operator is responsible for proper installation and safe operation.
Do not exceed the specified rated power.

Hazard Warnings

Risk of high sound levels: Prolonged exposure may cause permanent hearing damage.
Risk of overheating: Insufficient ventilation may lead to fire or product failure.
Risk of magnetic fields: May affect medical implants and electronic data carriers.

Manufacturer

Herstellerinformationen | Manufacturer Information

Celestion Professional Division
Unit 111 Claydon Business Park
IP6 0NL Great Blakenham ,Ipswich
United Kingdom
https://celestion.com/

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Wiring Harness, mono, for Loudspeaker / 1

Wiring harness for internal speaker connection
Number of speakers: 1
Type: Mono
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length: ca. 55 cm

12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m

TT Cable Speaker Cable

Length: 0,5 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]

20,00 €

Wiring Harness, mono, for Loudspeakers / 2

Wire Set for internal speaker connection
Number of speakers: 2
Type: Mono, parallel and serial
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length each ca. 55 cm

16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m

Speaker-Cable

Length: 3 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grau (#so415-0056)

9,90 €

Screw set for loudspeaker mounting

4 x Screw M5x20mm
4 x Washer M5
4 x T-Nut M5

1,48 €

Wiring Harness, mono, speaker crimps

Wiring Harness, mono, speaker crimps
Wire: 2 x 1,5 mm² red - black
Speaker Crimps on both sides
Length: ca. 55 cm

5,90 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m - black

TT Cable Speaker Cable

Length: 0,5 m
Color: black
1st Jack: Mono 6,3 mm (red)
2nd Jack: Mono 6,3 mm (red)
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Customers who bought this product bought also the following products:

Mallory 150's 0,1 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

Color can differ from the picture.

3,40 €

Mallory 150's 0,0022 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

1,35 €