Celestion A-Type - 12" / 50 W / 8 Ohm
Celestion A-Type - 12" / 50 W / 8 Ohm
SOLD OUT

Celestion A-Type - 12" / 50 W / 8 Ohm

Product No.:
ce-T5925
<font color=red><b>Temporarily out of stock</b></font></br>Please see hint for delivery time notice Temporarily out of stock
Please see hint for delivery time notice 
RoHs:
conform
Hint:
Available again ca. 21.06.2025
Weight:
3.5 kg per piece
109,00 €

incl. VAT excl. Shipping costs

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm
- recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

15,85 €

Wiring Harness, mono, for Loudspeaker / 1
  • Wiring harness for internal speaker connection
  • Number of speakers: 1
  • Type: Mono
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length: ca. 55 cm
12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m
  • Length: 0,5 m
  • Color: grey
  • 1st Jack: Mono 6,3 mm
  • 2nd Jack: Mono 6,3 mm
  • Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)
7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

20,00 €

Wiring Harness, mono, for Loudspeakers / 2
  • Wire Set for internal speaker connection
  • Number of speakers: 2
  • Type: Mono, parallel and serial
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length each ca. 55 cm
16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m
  • with Jack plugs
  • Length: 3 m
  • Cable type: 2 x 1,5 mm²
9,90 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
0,95 €

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Customers who bought this product bought also the following products:

Resistor Metaloxide 2 Watts / 2,2 kOhms - Pack of 5
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
  • Pack of 5
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,95 €
0,19 € per Piece

Metal Film Resistor RN70D 1/2 Watt 221k
  • Metalfilm Resistor RN70D
  • Very low noise (- 40 dB)
  • Military-Spezification
  • Tolerance: 1 %
2,25 €

Metal Film Resistor RN65D 1/2 Watt 150 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

0,90 €

Metal Film Resistor RN65D 1/2 Watt 68,1 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

1,45 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

20,00 €

Metal Film Resistor RN65D 1/2 Watt 121 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

0,85 €

Fender® 65 Twin Reverb 1M Log - Volume Control

65 Twin Reverb Potentiometer
Fender®  Part # 003-7596-000

2,00 €

Tube-Town Reverb Tank Bag 17", Black
  • Bag for Reverb Tank
  • Size: 17"  (43cm)
  • Black Tolex


 

14,20 €

Footswitch, Marshall Style, Two Bottons
Replacement footswitch for Marhsall amps:
  • generic version of Marshall M-PEDL-91004
  • compatible with JCM 900 4100 and others
  • Two Buttons, latching
  • Wire ca. 6 m
38,90 €

Metal Film Resistor RN65D 1/2 Watt 1,82 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

0,95 €

Metal Film Resistor RN65D 1/2 Watt 1,5 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

2,75 €

F+T 220 µF @ 350 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 220 µF
  • Voltage Rating: 350 V
  • Tolerance: - 10%+30%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 25 mm x 38 mm
  • Termination Style: axial
5,60 €