Tube-Town GmbH

Faceplate for TT Amp-Kit PI18

• Color: #LG10 Gold GLOSSY lecquered
• Material: 1.5 mm Acyrl Revers
• Front + Back Panel

Files:

• Template

• Cross-section: 1.0 mm²
• solid blank copper wire
• Insulation: thermoplastic (PVC)
• Outer diameter: 2.4 mm
• Operating voltage Uo/U: 300/500 V
• Specific resistance to VDE 281 Part 103
• Operating temperatures: +70 °C
• 100 m

• Cross-section: 1.0 mm²
• solid blank copper wire
• Insulation: thermoplastic (PVC)
• Outer diameter: 2.4 mm
• Operating voltage Uo/U: 300/500 V
• Specific resistance to VDE 281 Part 103
• Operating temperatures: +70 °C
• 100 m

• Cross-section: 1.0 mm²
• solid blank copper wire
• Insulation: thermoplastic (PVC)
• Outer diameter: 2.4 mm
• Operating voltage Uo/U: 300/500 V
• Specific resistance to VDE 281 Part 103
• Operating temperatures: +70 °C
• 100 m

TT Selection: Balanced
Both systems with balanced gain

Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

Electrical Characteristics

• Heater voltage (Uf): 6.3V or 12.6V
• Heater current (If): 300mA at 6.3V, 150mA at 12.6V
• Anode voltage (Ua): Maximum 300V
• Grid voltages (Ug1): -2V (typical)
• Grid voltages: -50V to 0V
• Anode current (Ia): 1.2mA (typical)
• Anode power dissipation: Maximum 1W per triode
• Anode resistance (ra): 62.5kΩ
• Amplification factor (μ): 100
• Transconductance (S): 1.6mA/V
• Input capacitance (Cin): 1.6pF
• Output capacitance (Cout): 1.6pF

Mechanical Characteristics

• Socket: B9A (Noval)
• Number of pins: 9

Pin Configuration

• 1 Anode (Triode 1)
• 2 Grid (Triode 1)
• 3 Cathode (Triode 1)
• 4 Heater (f)
• 5 Heater (f)
• 6 Anode (Triode 2)
• 7 Grid (Triode 2)
• 8 Cathode (Triode 2)
• 9 Center Heater (f)

Application Notes

• Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
• Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
• Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.

• Size (L X W) : ca. 120 x 90 cm (only available in this size)
• Material: 94 % Polypropylen, 6 % Acrylic
• Price per pcs.
• Actual shades may vary.

• FAQ Grillcloth

• Signal wire LiYDY 1 x 0,14 mm², shielded
• Diameter Outside: ca: 2,6 mm
• Voltage Rating max: 250 V
• Capacity: ca. 260 pF / m
• Temperature range: -10 bis +70 C°
• Conductor resistance: 40 Ohm / km @ 20 C°
• Test voltage: > 1 kHz
• IEC 60228/ VDE 0295
• one roll with 100 m

• Grillcloth Sample
• Material: 94 % Polypropylen, 6 % Acrylic
• Size ca. 10 x 10 cm
• Actual shades may vary.

• AA763 Generic Aluminium Chassis
• Size: 569 x 179 x 45 mm
• Material: 2 mm Aluminium (AlMg3)
• Lettering: none
• Made in Germany

• Datasheet

• Pri.: 5000 Ohm C.T.
• Sec.: 4-8-16 Ohm
• Power: 50 W (20Hz -3dB)

Files:

• Datasheet

• Primary: 0-120-230-240V @ 50/60 Hz
• Sec. 1: 600 V C.T. @ 100 mA
• Sec. 2: 6,3 V C.T. @ 3,2 A
• Sec. 3: 0V / 5V (@2,5 A / 6,3V @1,8A)
• Made with high quality 29M6 magnetic steel laminations.
• Made in Europe.
• Marshall 18 Watt Style

Files:

• Datasheet

• Board 1: 290 x 75 mm
• Board 2: 85 x 45 mm
• Material: 1,6 mm FR3, black
• silkscreen printing
• grounding (groun-bus) and component alignment
• used in the TT 5F6 kit