TT Diffusor 12" - Standard

The high-power 12” BlackHawk™ alnico speaker has arrived! Now your 1x12” 100 watt amp can really purr.... This guitar speaker will give your amp pristine top end, tight mids, and all just the right amount of warmth and bottom end.
Drop in replacement for EV™ SRO™ speaker.

Unit Weight:  9 pounds

Mounting Information

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 88.14 Hz
• DC Resistance (Re): 7.84 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 6.32
• Electromagnetic Q (Qes): 1.03
• Total Q (Qts): 0.88
• Compliance Equiv. Vol. (Vas): 21.04 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 11.16 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.46 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.26 db

This speaker has a personality all its own, with balance from top to bottom and rich harmonic complexity. Good punch and definition in the lows that won’t get flabby, a warm, throaty, and broad midrange, and nice grit with soaring articulation in the highs.

Spezification:

• Nominal Impedance(Z): 16 Ohm
• Rated Power IEC268-5: 75 Watt
• Sensitivity(@1W/1 m): 100 dB/SPL
• Frequency range (FS): 80 – 5000 Hz
• Resonant Frequency (Fs): 93 Hz
• Voice Coil Diameter: 1,75"

Files:

• Datasheet

 

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker.Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight.You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing. But pick up a cab that’s loaded with Neo Creambacks and you’ll see what makes this speaker truly different.


General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 60W
• Nominal impedance: 8Ω & 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Magnet type: Neodymium
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.6Ω & 13.1Ω
• Voice coil former material: Round copper

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 4.9", 124mm
• Mounting slot dimensions: 0.31", 7.9mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 4.8", 121.5mm
• Unit weight: 4.2lb, 1.9kg

 

YOU SAY YOU WANT A SPEAKER, BUT YOU CAN'T MAKE UP YOUR MIND...

A broad response ideal for either lead or rhythm guitar, as well as deep range for dropped tuning, lets the Minneapolis breathe new life into your tone. An American made, purple paper cone (honoring our favorite local legend), is anchored into a robust steel basket, and delivers a strong and even tone for lows, mids, and highs.

This 10" model provides high sensitivity by using a high-power ferrite magnet and the same 1.75” voice coil used in the 12” ToneSpeak series; a perfect upgrade for anyone looking to add a little more oomph to their tube amp.

American tone guitar speaker

• 10" (250 mm) steel basket diameter
• 50 watts, 8 ohm, 97 dB SPL
• 1.75" aluminum voice coil, Nomex former
• USA-made purple paper cone
• 35 oz ferrite magnet
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• Speaker Type: Guitar Speaker
• Application: Musical Instruments
• Environment: Indoor
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 50 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 50
• Program Power (W): 100
• Frequency Range (Hz): 55 - 5,500
• Sensitivity (dB SPL) ¹: 97
• Resonant Frequency (Fs) (Hz): 97
• DC Resistance (Re) (Ω): 7.1
• Voice Coil Inductance (Le) (mH): 0.41
• Mechanical Q Factor (Qms): 18.89
• Electrical Q Factor (Qes): 0.72
• Total Q Factor (Qts): 0.7
• Mechanical Resistance (Rms) (kg/s): 0.74
• Compliance Equivalent Volume (Vas) (L): 26.2
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.6
• Moving Mass (Mms) (gm): 23.83
• Coil Winding Height (mm): 10.92
• Motor Force Factor (BL) (T•M): 11.73
• Efficiency (η₀) (%): 3.21
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 134.58
• Basket Type: Stamped steel
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Diameter (mm): 44.5
• Voice Coil Wire Material: Copper clad aluminum
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 992.23
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Cloth

The new G10 Creamback packs everything guitar players love about Creamback speakers into a 10-inch format. Hand-built in the UK using the same production methods and materials developed for the 12-inch models, the G10 Creamback uses a ceramic magnet and a 1.75-inch voice coil to deliver 45-watt power handling. With all the punch and dynamics typical of a 10, its overall tone is warm, expressive, detailed and well-balanced.

General Specifications

• Nominal diameter: 10", 254mm
• Power rating: 45W Nominal
• Impedance: 8Ω
• Sensitivity: 96dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 14oz
• Frequency range: 95-5500Hz
• Resonance frequency, Fs: 98Hz
• DC resistance, Re: 6.4Ω

Mounting Information

• Cut-out diameter: 9.0", 229mm
• Diameter: 10.0", 254mm
• Magnet structure diameter: 4.9", 124mm
• Mounting slot dimensions: 0.25 x 0.43", 6.5 x 11mm Ø
• Mounting slot PCD: 9.6", 245mm
• Number of mounting slots: 8
• Overall depth: 4.0", 102mm
• Unit weight: 3.5lb, 1.6kg

12" seamed ribbed cone with a large ceramic magnet, the replacement for C12N.
Similar to the 12LC but with less output and a smoother yet balanced sound that retains headroom. Some nice compression is evident compared to the 12LC but not at the expense of headroom. Originally intended for studio or home use, many musicians claim it to be the closest to the original C12N from 4 and 5 decades ago.  

Specs:

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter: 1.5"
• Magnet: Ceramic - 35oz
• Weight: 9lbs / 4,1 Kg

Dimensions:

• Diameter: 12 1/4" / 311 mm
• Depth rear mount: 5 1/16"
• Cut-out hole diameter". 11"
• Mounting Holes: 1/4"
• Number of mounting holes: 8
• Mounting Hole Circle Diameter: 11 3/4"

Create your next signature sound with the Boston 10” guitar speaker. Spotlight your tone with a driver that delivers a warm, articulate bottom-end, scooped mids, and blooming highs.

This model includes a good old fashioned 1960’s style Alnico magnet assembly for an ultra-quick impulse response. The often-misunderstood magic of Alnico is that it partially and temporarily demagnetizes when you push them hard, applying a simple compression effect that adds a satisfying sense of sweetness that can't be beat.

American tone guitar speaker

• 10" (250 mm) steel basket diameter
• 20 watts, 8 ohm, 96 dB SPL
• 1" copper voice coil, Kraft paper former
• 6.8 oz alnico magnet
• USA-made seamed paper cone
• Size, Nominal (inch & mm): 10" (250 mm)
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 55 - 6,200
• Sensitivity (dB SPL) ¹: 96
• Resonant Frequency (Fs) (Hz): 104
• DC Resistance (Re) (Ω): 6.3
• Voice Coil Inductance (Le) (mH): 0.35
• Mechanical Q Factor (Qms): 19.9
• Electrical Q Factor (Qes): 1.77
• Total Q Factor (Qts): 1.63
• Mechanical Resistance (Rms) (kg/s): 0.58
• Compliance Equivalent Volume (Vas) (L): 29.6
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.6
• Moving Mass (Mms) (gm): 17.5
• Motor Force Factor (BL) (T•M): 6.4
• Efficiency (η₀) (%): 1.83
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 58.8
• Basket Type: Cold-rolled steel
• Terminal Size (mm): 5.2 x 0.5 (Dual lug)
• Voice Coil Diameter (mm): 25.4
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Kraft paper
• Voice Coil Winding Style: Single Layer
• Magnet Material: Alnico
• Magnet Weight (g): 192.77
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Felt

Featured in the world's top selling 4x12 cabinet, the G12T-75 is a high powered rock player's dream.

Built to meet the demands of high gain amplifiers, the G12T-75 combines a huge, tightly controlled low-end and aggressive mid-range with a softened top-end that adds a welcome sweetness to overdrive, distortion and aggressive upper harmonics. These are the characteristics that make the G12T-75 the weapon of choice for Yngwie Malmsteen.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 75Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.77Ω or 12.9Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 127mm
• Unit weight: 7.7lb, 3.5k

The 12” high power Reaper HP™ is designed to go where the 30 watt version couldn't. If you want a good clean tone with just the right amount of breakup at medium-high volume, then this is your speaker. This 50 watt version is both warmer and more powerful than the 30 watt version.

Unit Weight:  10 pounds

Mounting Information

• Diameter: 12.2”
• Overall depth: 5.3”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 101.9 Hz
• DC Resistance (Re): 6.7 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 8.613
• Electromagnetic Q (Qes): 0.7235
• Total Q (Qts): 0.6674
• Compliance Equiv. Vol. (Vas): 1.384 cu ft
• Mech. Compliance of Susp. (Cms): 87.6 mm/N
• BL Product (BL): 13.76 T-M
• Diaphragm Mass Inc. Airload (Mms): 27.8476 grams
• Surface Area of Cone (Sd): 558.645 cm squared
• Sound Pressure Level (spl): 99.42 db

Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound.
Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required.

Specifications

• Nominal Diameter: 209 mm / 8 in
• Nominal Impedance: 8 Ω
• Rated Power AES: 150 W
• Continuos Program Power: 300 W
• Sensitivity @ 1W/1m: 95.0 dB
• Voice Coil Diameter: 50 mm (2")
• Voice Coil Winding Depth: 11 mm
• Magnetic Gap Depth: 8 mm
• Flux Density: 1.10 T
• Magnet Weight: 1100 g
• Net Weight: 3.1 Kg
• Magnet Type: Ferrite
• Basket Material: Pressed Sheet Steel
• Voice Coil Winding Material: Copper
• Voice Coil Former Material: Kapton
• Cone Material: Paper
• Cone Treatment: No
• Surround Material: Treated Cloth
• Dust Dome Material: Solid Paper

Thiele & Small Parameters

• Re: 6.08 Ω
• Qms: 3.61
• Qts: 0.33
• Cms: 203 µm/N
• Vas: 13.1 l
• X max: +/- 3.1 mm
• N: 1.45 %
• Fs: 74.7 Hz
• Qes: 0.36
• Mms: 22.4 g
• Bxl: 13.29 Tm
• Sd: 213.8 cm²
• X var: +/- 6.6 mm
• Le (1KHz): 0.71 mH

The G8C ceramic speaker will breathe new life into your small combo.  This little monster puts out some serious sound. A serious upgrade for your Fender Champ.

Thiele-Small Parameters

• Resonant Frequency (Fs): 148.07 Hz
• DC Resistance (Re): 6.7 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 9.6715
• Electromagnetic Q (Qes): 0.9538
• Total Q (Qts): 0.8682
• Compliance Equiv. Vol. (Vas): 0.257 cu ft
• Mech. Compliance of Susp. (Cms): 110.714 mm/N
• BL Product (BL): T-M
• Diaphragm Mass Inc. Airload (Mms): 10.4353 grams
• Surface Area of Cone (Sd): 214.0839 cm squared
• Sound Pressure Level (spl): 95.78 db

The 12” BlackHawk™ alnico speaker has finally arrived! Now your 1x12” 30-50 watt amp can really rock. This guitar speaker will give your amp pristine top end, tight mids, and all just the right amount of warmth and bottom end. This speaker is the 50 watt version of the 12” Black & Blue alnico. This 50 watt version has more low end than its 15 watt cousin. This speaker is the perfect upgrade for your VOX™ AC30. Drop in replacement for Celestion™ Gold™ alnico speaker.

Note: the naming is a bit awkward, because the difference to the Blackhawk HP is enormous. More correct would be the name "Black & Blue HP", so the 50 watt version of the Black&Blue or Celestion Blue.

Mounting Information

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 110.42 Hz
• DC Resistance (Re): 7.98 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 14.62
• Electromagnetic Q (Qes): 1.06
• Total Q (Qts): 0.98
• Compliance Equiv. Vol. (Vas): 13.30 cu ft
• Mech. Compliance of Susp. (Cms): .07 mm/N
• BL Product (BL): 12.42 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.69 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 100.08 db

If you are looking for a speaker with a classic American vibe, but need a smoother more soulful top end, look no further than the WGS G12C/S.  This is based on our popular G12C, but with a smooth cone, felt dust cap and just the right amount of edge treatment.  This speaker works great in amps where you are going for that big American clean but just need it a little softer up top.  Destined to be another WGS classic!

Thiele-Small Parameters

• Resonant Frequency (Fs): 95.68 Hz
• DC Resistance (Re): 7.47 Ohm
• Coil Inductance (Le): 0.28 mH
• Mechanical Q (Qms): 14.56
• Electromagnetic Q (Qes): 0.73
• Total Q (Qts): 0.69
• Compliance Equiv. Vol. (Vas): 19.70 cu ft
• Mech. Compliance of Susp. (Cms): 0.10 mm/N
• BL Product (BL): 12.83 T-M
• Diaphragm Mass Inc. Airload (Mms): 26.70 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.54 db

It's hard to escape the sound of the G12H, just listen to any Hendrix recording and chances are you'll be hearing a whole raft of them powering the guitar out of the mix.

These faithful re-creations capture the unmistakeable mojo of late 60s rock guitar tones. Unsurpassed in a 4x12 for cranking out towering, huge power chords, the Heritage Series G12H (55) features the 55c/s 'bass' cone. This model is famous for its thick syrupy tones, with a deep growling back end, densely complex mid-range and a finely detailed top end.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 30Wrms
• Nominal impedance: Available 8Ω or 15Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Magnet type: Ceramic
• Magnet weight:50oz, 1.42kg
• Frequency range: 55-5000Hz
• Resonance frequency, Fs: 55Hz
• DC resistance, Re: 6.53Ω and 12.11Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 6.6", 168mm
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.3", 135mm
• Unit weight: 10.4lb, 4.7kg

Finally, the wait is over. We have created a 10" speaker that captures all the tone and mojo of our extremely popular 12" Green Beret.   The Green Beret 10 boasts the same midrange push, articulate top end and warm, harmonically rich breakup of its larger namesake.  It also sports an impressive amount of low end for a 10" speaker.   With a 1.5" voice coil and a paper former, this speaker drips with vintage tone.    If you've been looking for classic British tone in a 10" speaker the Green Beret 10 delivers.

Tube-Town Review: Due to the smooth cone used in the 10" WGS Green Beret, its top end is much more subtle compared to the original 12" Celestion Greenback G12M, but also to the 10" Celestion Greenback. However, the midrange is not overemphasized and the whole speaker sounds full and balanced, with a distinct "American touch" to the overall sound.
We recommend the 10" Green Beret for everything from blues to rock to modern metal, but less so for blackface-typical clean sounds, for which there are better suited 10" speakers. In order for the speaker to develop its full sonic spectrum, it should be used either in an open cabinet or combo, or in a large-volume closed cabinet. A closed cabinet that is too small will dampen the speaker too much and cut the sound.
The WGS 10" Green Beret is also a real upgrade for many budget combos that are equipped with inexpensive 10" speakers and often sound a bit thin and sharp, especially when it comes to harder tones.

Thiele-Small Parameters (8 ohm version)

• Resonant Frequency (Fs): 117.31 Hz
• DC Resistance (Re): 6.8 Ohm
• Coil Inductance (Le): mH
• Mechanical Q (Qms): 9.429
• Electromagnetic Q (Qes): 1.884
• Total Q (Qts): 1.57
• Compliance Equiv. Vol. (Vas): 15.59 cu ft
• Mech. Compliance of Susp. (Cms): 0.082 mm/N
• BL Product (BL): 11.71 T-M
• Diaphragm Mass Inc. Airload (Mms): 22.4417 grams
• Surface Area of Cone (Sd): 336.0962 cm squared
• Sound Pressure Level (spl): 96.62 db

The 10” Veteran™ speaker from WGS™ has great crunchy cone breakup and clean, warm overtones. The seamed paper cone is key to this guitar speaker's sound.

Thielle-Small Parameters

• Resonant Frequency (Fs): 110.86 Hz
• DC Resistance (Re): 6.9 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 17.2304
• Electromagnetic Q (Qes): 1.9694
• Total Q (Qts): 1.7674
• Compliance Equiv. Vol. (Vas): 0.808 cu ft
• Mech. Compliance of Susp. (Cms): 119.122 mm/N
• BL Product (BL): 6.15 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.3021 grams
• Surface Area of Cone (Sd): 366.0962 cm squared
• Sound Pressure Level (spl): 93.84 db

12" seamed ribbed cone with a large ceramic magnet, the replacement for C12N.
Similar to the 12LC but with less output and a smoother yet balanced sound that retains headroom. Some nice compression is evident compared to the 12LC but not at the expense of headroom. Originally intended for studio or home use, many musicians claim it to be the closest to the original C12N from 4 and 5 decades ago.  

Specs:

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter: 1.5"
• Magnet: Ceramic - 35oz
• Weight: 9lbs / 4,1 Kg

Dimensions:

• Diameter: 12 1/4" / 311 mm
• Depth rear mount: 5 1/16"
• Cut-out hole diameter". 11"
• Mounting Holes: 1/4"
• Number of mounting holes: 8
• Mounting Hole Circle Diameter: 11 3/4"

The Neo V-Type has been designed to be a cost-effective, lightweight neodymium magnet guitar speaker option both for manufacturers and for after-market upgrades, with no compromise on tone.

This sweet sounding speaker has a superbly balanced sonic signature that imparts a vintage musicality to your tone. Clean sounds have just the right amount of upper-mid chime and HF sparkle to add clarity and definition. Crank it up for a sizzling overdrive and some raw rhythmic grind, but expect a little extra definition and note separation for your searing, single note lead lines thanks to some neodymium magnet magic.

Specifications

• Nominal diameter: 305mm/12in
• Power handling: 70W
• Nominal impedance: 8Ω or 16Ω
• Sensitivity: 98dB
• Chassis type: Pressed Steel
• Voice coil diameter: 44mm/1.75in
• Voice coil material: Round copper
• Magnet type: Neodymium
• Frequency range: 75Hz-5000Hz
• Resonance Frequency: 75Hz

The 12” ET65™ speakers has big and creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created! This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

Vintage American Ceramic Guitar Speaker – Super Ribbed Cone
12" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C12R.

• Magnet:  Small Ceramic
• Power: 25W
• Sensitivity: 97,5dB
• Weight: 1,7 kg
• VC Diameter: 1″
• 8 Ohm

• Rubber foot with steel insert
• Size: d = 38 mm, h = 25 mm
• Pack of 4

Universal Mono/Stereo Terminal

for the use with two 8 Ohm speakers the following configurations are possible:

• 4 ohm mono
• 8 ohm left + 8 ohm right stereo
• 8 ohm left only mono
• 8 ohm right only mono
• 16 ohm mono

Size: ca. 110 x 103 mm
Cutout: ca. 87 x 76 mm

Colorcodes:

• black: L-
• red: L +
• green: R -
• white: R +

Files:

• Datasheet

Soldering Iron Tip Cleaner Set

This soldering iron tip cleaner set includes a holder and cleaning wool, providing a convenient solution for keeping your soldering iron tips clean and in top condition. The cleaner effectively removes residue from soldering tools without damaging the tips, ensuring a longer lifespan for your equipment.

Specifications

• Includes holder and cleaning wool
• Enhanced safety and stability with 3 knobs
• Prevents rapid oxidation of the soldering iron tip
• Maintains the temperature of the soldering iron tip

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (ah4023b)
• Powder Coated black
• Internal radius: 12 mm
• 16 x Screws, flat head, black

• Type: Pointer Knob "Classic Fluted"
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 19,6 x 15,75 mm
• Mounting: Set-Screw