EH 5U4GB
EH 5U4GB

EH 5U4GB

Product No.:
eh5u4gb
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.06 kg per piece
21,90 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

Hammond Choke 158Q
Filter choke, open bracket
  • Inductance (+/- 15%): 5 H
  • Resistance (+/- 15%): 105 Ohm
  • max Current DC: 150 mA
  • max Voltage DC: 400 V
  • Leads: min 12 cm
  • Hipot tested (100%) mit 1500 VAC
Files:
34,90 €

Hammond Choke 159Q
Filter choke, open bracket
  • Inductance (+/- 15%): 7 H
  • Resistance (+/- 15%): 100 Ohm
  • max Current DC: 150 mA
  • max Voltage DC: 500 V
  • Leads: min 12 cm
  • Hipot tested (100%) mit 1500 VAC
Files:
39,70 €

JJ 5751

This tube is recommend to tame the gain of an amp and make it sound "sweeter". The 5751 has only a gain of 70 instead of 100 like the typical 12AX7/ECC83 tube type and can be used as a drop in replacement for 12AX7 / ECC83 tubes.

Files:


 

17,90 €

JJ KT88 Red Label - PAIR

2 tubes, matched as pair

A powerfull bass with crystal clear highs - this is the KT88 by JJ. This tubes works perfect with any kind of KT88 / 6550 amp

Files:

115,20 €
57,60 € per Piece

Tung-Sol 12AX7 / ECC83 Reissue V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound.

28,50 €

EH 7025  (12AX7 / ECC83 HQ) -  V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

27,80 €

F+T 220 µF @ 100 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 220 µF
  • Voltage Rating: 100 V
  • Tolerance: - 10%+30%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 14 mm x 30 mm
  • Termination Style: axial
3,65 €

F+T 100 µF @ 100 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 100 µF
  • Voltage Rating: 100 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 10 mm x 30 mm
  • Termination Style: axial
2,75 €

Elektrolyt 47 µF @ 63 Volt
  • Type: Electrolytic capacitor
  • Capacitance: 47 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 8,5 mm x 17 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,70 €

Elektrolyt 22 µF @ 35 V
  • Type: Electrolytic capacitor
  • Capacitance: 22 µF
  • Voltage Rating: 35 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: axial
  • Color and manufacturer may differ from the picture shown

Images are for reference only. See Product Specifications

0,50 €

Elektrolyt 22 µF @ 100 V
  • Type: Electrolytic capacitor
  • Capacitance: 22 µF
  • Voltage Rating: 100 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 7 mm x 11 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,80 €

Fuse 0.5 A slow blow, Pack of 10
  • Rated Voltage: 250 VAC
  • Contact caps: nickel-plated brass
  • Size: Ø 5 mm x 20 mm
  • Pack of 10
1,55 €

Fuse 1.6 A slow blow, Pack of 10
  • Rated Voltage: 250 VAC
  • Contact caps: nickel-plated brass
  • Size: Ø 5 mm x 20 mm
  • Pack of 10
1,20 €