Main page » Tubes » Preamptubes » 12AX7 / ECC83 / 5751 » Silicon Tube Damper for 12AX7, EL84

Silicon Tube Damper for 12AX7, EL84

Product No.:: tt-da05
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
Weight:: 0.002 kg per piece

0,45 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Inner diameter ca. 22 mm
Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Needed for:

Tung-Sol 5751

Premium medium-Mu Twin Triode for use in preamplifier.

29,95 €

EH 7025 (12AX7 / ECC83 HQ) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

27,80 €

EH 7025 (12AX7 / ECC83 HQ)

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

21,80 €

EH 7025 (12AX7 / ECC83 HQ) - Balanced

TT Selection: Balanced
Both systems with balanced gain

27,80 €

Customers who bought this product bought also the following products:

Alpha 25 kOhm log / Audio, 3,8"

Panel Mount Potentiometer 3/8"

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Drill Ø: 3/8-32 (9,45 mm)
Shaft: 6,35 mm, Solid Shaft

1,20 €

Knob Chickenhead creame

Type: Chickenhead
Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size: 32 x 13,7 mm
Mounting: Set-Screw

0,90 €

Tung-Sol 6V6 Reissue - SINGLE

Single tube, not matched

Totally Tweed! The preferred OEM tube of ’50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps – plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6’s. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!