Tung-Sol 6V6 Reissue  - SINGLE
Tung-Sol 6V6 Reissue - SINGLE

Tung-Sol 6V6 Reissue - SINGLE

Product No.:
ts6v6-single
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
Stock:
5 piece
RoHs:
conform
Weight:
0.04 kg per piece
29,00 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

TT 12AX7 / ECC83 Classic V1
TT Selection: Balanced
Both systems with balanced gain


The TT12AX7 impresses with its fine and detailed reproduction of the highs, which is maintained even at high amplification levels. Due to a higher H3 part, the TT12AX7 sounds significantly cleaner than many other 12AX7/ECC83 tubes, which makes the bass range appear much tighter. We therefore especially recommend this tube for styles such as clean, crunch, and metal, where high amplification and clear transparency are required.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
Old price: 22,90 €
Only 19,80 €
Resistor Metaloxide 5 Watts / 10 kOhms / Small Size
Metal Oxide Film Resistors
  • Termination Style: Axial     
  • Power Rating: 5 W     
  • Tolerance: 5 %     
  • Temperature Coefficient: 350 PPM / C     
  • Operating Temperature min/max: - 55 C / + 155 C      
  • Voltage Rating: 500 V     
  • Diameter: 8,5 mm     
  • Length: 25 mm     
  • Lead Diameter:  0.75 mm    
0,65 €
Roederstein MKT 1813 0,001µF / 630 V DC
  • Type: Metalized Polyester Film Capacitors (PET)
  • Voltage Rating: 630 VDC / 220 VAC
  • Tolerance: +/- 10%
  • Operating Temperature Range: - 55°C / + 100 °C
  • Termination Style: axial
1,25 €
Tubular Film Capacitor 0,001 µF / 630 V
  • Type: Tubular Metalized Polyester Film Capacitors
  • Voltage Rating: 630 V
  • Tolerance: +/- 10%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Termination Style: axial
    • Non-inductive
    • Self healing windings.
    • Similar to the Mallorys 150-Series
0,49 €
Orange Drop 716 0,001 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,65 €
Kit Seriel FX-Loop LND150

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with  two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

27,80 €
Polypropylen Capacitor, axial, 630V, 0.001uF
  • MPW axial leaded metallized polypropylene film capacitors
  • Self Healing
  • Low ESR
  • Tolerance: +10% @ 1 kHz, 25°C
  • Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
  • Size: Ø 6,5 x 14,5 mm
  • Dielectric: Polypropylene
  • Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)
1,11 €
Orange Drop 0,001 µF @ 600 V

ORANGE DROP®, Low Loss

  • Type:  Polypropylene Film Capacitors
  • Voltage Rating: 600 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
2,15 €
Tolex Tube-Town Tweed Vinyl
Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:
  • 80% PVC film
  • 20% polyester-cotton fabric
  • REACH compliant
Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.
26,80 €
19,85 € per m²
Flat Brushes, 30 mm, bright bristles

Width: 30 mm, bright China bristles with wood handle

ideally for the Tolex Glue SG5

2,55 €
Tung-Sol 12AX7 / ECC83 Reissue V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound.

28,50 €