Main page » Tubes » Tung-Sol » Tung-Sol 5751

Tung-Sol 5751

Description

Premium medium-Mu Twin Triode for use in preamplifier.

Safety Information

Safety Information for Vacuum Tubes

For all electrical, electromechanical and mechanical components, the specifications and operating parameters arising from the respective type standard generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information

NOT SUITABLE FOR CHILDREN - choking hazard due to small parts
NOT SUITABLE FOR UNTRAINED PERSONS - danger to life due to high voltages
The safety and processing requirements applicable to the component must be observed
CE conformity applies only when installed professionally
Warranty becomes void in case of improper handling
The operator is responsible for proper installation
Local regulations and VDE provisions must be complied with
Never exceed the rated power
Never exceed the rated voltages and currents

Required Expertise

Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
Safe handling of high voltages (up to 500V and more)
Reading and understanding circuit diagrams
Selection of appropriate tools
Knowledge of electrical components and their characteristics
First-aid knowledge for electrical accidents
Knowledge of VDE regulations and safety requirements

Amplifier Tubes

Hazard due to high voltages
Hazard due to very high heat generation
Hazard due to glass breakage
Hazard due to UV radiation in case of defective tubes

Manufacturer

Herstellerinformationen | Manufacturer Information

New Sensor Corporation, 32-33 47th Avenue, Long Island City, NY 11101, USA

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

Socket Noval Ceramic, Chassis w/ mounting bracket

Type: Noval Socket
Version: Ceramic Chassis mount
w/ mounting bracket
Termination Style: solder lugs
for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

0,75 €

Shield Noval red

Tube Shield Noval

for noval sockets
Color: red
High: 55 mm
Including Base and Shield

1,25 €

Socket Noval Ceramic, Chassis w/ Shield

Noval Socket

Ceramic
Chassis mount with shield
Termination Style: solder lugs
for Tube Type: 12AX7, 12AT7, 12AU7 etc.

1,79 €

Silicon Tube Damper for 12AX7, EL84

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Inner diameter ca. 22 mm
Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

0,45 €

Customers who bought this product bought also the following products:

Jupiter M10C-P Midnight 10" / 25 W / 4 Ohm - Paper Coil

10" seamed ribbed cone with Large Ceramic Magnet, the replacement for C10N, paper voice coil.
Similar to the 10LC but with less output but a more balanced sound, with more sparkle on the top end. A slightly smoother sound that retains headroom.
Originally intended for studio or home use, many musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
Paper voice coil versions are most similar to the originals and impart a woody tone that is flatter when directly compared to our standard coil.

129,00 €

JJ 6V6 Red Labe - PAIR - Double Mica Special Edition

2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

Datasheet

55,00 €
27,50 € per Piece