TT Diffusor 12" - Standard

• Diameter:12.2”
• Overall depth: 5.3”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

• Resonant Frequency (Fs): 94.84 Hz
• DC Resistance (Re): 7.99 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 12.15
• Electromagnetic Q (Qes): 0.78
• Total Q (Qts): 0.74
• Compliance Equiv. Vol. (Vas): 18.53 cu ft
• Mech. Compliance of Susp. (Cms): 0.10 mm/N
• BL Product (BL): 13.25 T-M
• Diaphragm Mass Inc. Airload (Mms): 28.88 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.84 db

The 12” Reaper™ guitar speaker is a DROP IN REPLACEMENT for Celestion™ G12H30 Anniversary Edition.
This speaker sounds like a Green Beret on steroids.
Cone breakup does not occur as early as the Green Beret.
This speaker sounds great mixed with a Green Beret, Veteran 30, or by itself.

Unit Weight:  10 pounds

Mounting Information

• Diameter: 12.2”
• Overall depth: 5.3”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

• Resonant Frequency (Fs): 126.60 Hz
• DC Resistance (Re): 8.20 Ohm
• Coil Inductance (Le): 0.33 mH
• Mechanical Q (Qms): 8.56
• Electromagnetic Q (Qes): 1.01
• Total Q (Qts): 0.90
• Compliance Equiv. Vol. (Vas): 10.52 cu ft
• Mech. Compliance of Susp. (Cms): 0.06 mm/N
• BL Product (BL): 13.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 28.57 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.04 db

Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound.
Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required.

Specifications

• Nominal Diameter: 318 mm / 12 in
• Nominal Impedance: 8 Ω
• Rated Power AES: 250 W
• Continuos Program Power: 500 W
• Sensitivity @ 1W/1m: 97.5 dB
• Voice Coil Diameter: 65 mm (2.5")
• Voice Coil Winding Depth: 12 mm
• Magnetic Gap Depth: 8 mm
• Flux Density: 1.15 T
• Magnet Weight: 1450 g
• Net Weight: 4.8 Kg
• Magnet Type: Ferrite
• Basket Material: Pressed Sheet Steel
• Voice Coil Winding Material: Copper
• Voice Coil Former Material: Kapton
• Cone Material: Paper
• Cone Treatment: No
• Surround Material: Treated Cloth
• Dust Dome Material: Solid Paper

Thiele & Small Parameters

• Re: 6.21 Ω
• Qms: 5.14
• Qts: 0.32
• Cms: 216 µm/N
• Vas: 73.5 l
• X max: +/- 3.1 mm
• N: 2.64 %
• Fs: 50.2 Hz
• Qes: 0.34
• Mms: 46.6 g
• Bxl: 16.40 Tm
• Sd: 490.9 cm²
• X var: +/- 5.5 mm
• Le (1KHz): 0.94 mH

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

• Resonant Frequency (Fs): 110.42 Hz
• DC Resistance (Re): 7.98 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 14.62
• Electromagnetic Q (Qes): 1.06
• Total Q (Qts): 0.98
• Compliance Equiv. Vol. (Vas): 13.30 cu ft
• Mech. Compliance of Susp. (Cms): .07 mm/N
• BL Product (BL): 12.42 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.69 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 100.08 db

Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.With its fast attack and tightly controlled low- end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

• Nominal diameter: 12", 305mm
• Power rating: 65Wrms
• Nominal impedance :Available 8Ω or 15Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range:80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.9Ω or 11.8Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.7", 145mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.0", 128mm
• Unit weight: 7.7lb, 3.5kg

• Nominal diameter: 12", 305mm
• Power rating: 80Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 98dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 31oz, 0.88kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.1Ω or 10.41Ω

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.3", 134mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 4.7", 119mm
• Unit weight: 6.8lb, 3.1kg

Delivering a glorious, laid-back attack, the Cream exudes warm lows and a brilliant bell-like chime. It has smooth and organic mids, further characterised by a fine-grained detail that adds a high-definition quality to the vocal range.

The Cream has been specially created to bring alnico class to all kinds of amps from 1-watt to 90-watts. It conveys a satisfying warmth, detailed expressiveness and exceptional musicality, even at low power levels.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 90W
• Nominal impedance: 8Ω
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Alnico
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 6.7Ω
• Made in UK

• Nominal diameter: 10", 254mm
• Power rating: 40Wrms
• Nominal impedance: Available 8Ω or 15Ω
• Sensitivity: 98dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Alnico
• Frequency range: 80-6000Hz
• Resonance frequency, Fs: 80Hz
• DC resistance, Re: 6.66Ω and 13.56Ω

• Cut-out diameter: 9.0", 229mm
• Diameter: 10.1", 256mm
• Magnet structure diameter: 4.7", 119mm
• Mounting slot dimensions: 0.25", 6.5mm Ø
• Mounting slot PCD: 9.6", 244mm
• Number of mounting slots: 8
• Overall depth: 5.3", 135mm
• Unit weight: 6.0lb, 2.7kg

• 10" (250 mm) steel basket diameter
• 50 watts, 8 ohm, 97 dB SPL
• 1.75" aluminum voice coil, Nomex former
• USA-made purple paper cone
• 35 oz ferrite magnet
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• Speaker Type: Guitar Speaker
• Application: Musical Instruments
• Environment: Indoor
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 50 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 50
• Program Power (W): 100
• Frequency Range (Hz): 55 - 5,500
• Sensitivity (dB SPL) ¹: 97
• Resonant Frequency (Fs) (Hz): 97
• DC Resistance (Re) (Ω): 7.1
• Voice Coil Inductance (Le) (mH): 0.41
• Mechanical Q Factor (Qms): 18.89
• Electrical Q Factor (Qes): 0.72
• Total Q Factor (Qts): 0.7
• Mechanical Resistance (Rms) (kg/s): 0.74
• Compliance Equivalent Volume (Vas) (L): 26.2
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.6
• Moving Mass (Mms) (gm): 23.83
• Coil Winding Height (mm): 10.92
• Motor Force Factor (BL) (T•M): 11.73
• Efficiency (η₀) (%): 3.21
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 134.58
• Basket Type: Stamped steel
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Diameter (mm): 44.5
• Voice Coil Wire Material: Copper clad aluminum
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 992.23
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Cloth

• Power Handling: 50W
• Sensitivity: 97 dB
• Voice Coil Diameter:  1.5"
• Magnet: Ceramic - 35oz
• Weight: 7lbs / 3,17 kg

• Diameter: 10 3/16" / 258 mm
• Depth rear mount: 4 1/4:
• Cut-out hole diameter:  9"
• Mounting Holes:  1/4"
• Number of mounting holes:  8
• Mounting Hole Circle Diameter:  9 3/4"

• Nominal Impedance(Z): 16 Ohm
• Rated Power IEC268-5: 75 Watt
• Sensitivity(@1W/1 m): 100 dB/SPL
• Frequency range (FS): 80 – 5000 Hz
• Resonant Frequency (Fs): 93 Hz
• Voice Coil Diameter: 1,75"

• Datasheet

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

Combining decades of experience with advanced measurement and analysis, the V-Type has been built using a carefully balanced 'recipe' of old and new design techniques. It produces a heady, exciting modern vintage sound that just makes you want to keep on playing: a speaker that delivers authentic Celestion tone whatever your style.The V-type is a sweet sounding speaker with a superbly balanced tonal signature that imparts a vintage musicality to your tone. Clean sounds are true across the lows, mids and highs, with just enough upper-mid chime and HF sparkle to add clarity and definition. Crank it up for a sizzling overdrive and raw rock tones, with plenty of mid-band warmth to give body and substance to lead note playing.

General Specifications

• Nominal diameter: 12", 305mm
• Power rating: 70Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 98dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 31oz, 0.88Kg
• Frequency range: 70-5000 Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: Available 7.3Ω or 12.9Ω

Mounting Information

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 5.3”, 134mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 8
• Overall depth: 4.84”, 123mm
• Unit weight: 7.2lb, 3.3kg

Tube-Town's Review

The Celestion V-Type sounds like a Vintage 30 with a touch of Greenback. Does anybody really need this? We think so, because the V-type has some clear advantages over the Vintage 30.
The biggest complaint about the Vintage 30 it the strong mid peak, which is nearly linear at 100dB between 450 - 1300 Hz. The V-Type also has a mid peak, but it starts later, around 600 Hz, and drops off sharply after 1kHz, which gives it a significantly smoother, less cluttered sound.
The V-Type also weighs quite a bit less than the Vintage 30. Your back will be grateful, and combo owners will be particularly happy.
The weight reduction follows from the use of a smaller magnet. The smaller magnet has the additional advantage that it can now be used in combos in which the magnet of a Vintage 30 would come in contact with the tubes or transformers. The V-Type also handles 10 watts more, which allows greater headroom, and is particularly useful with 50-watt amps.
Finally, the V-Type is considerably less expensive than the Vintage 30, for which your wallet will thank you.
All in all, we have to ask if the Vintage 30 is even necessary any more, as the V-Type is, to our taste, a better speaker and highly recommended as a direct replacement.
 

• Nominal diameter: 12", 305mm
• Power rating: 80Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 99dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 55.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 50oz, 1.42kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: Available 6.9Ω or 11.8Ω

• Cut-out diameter: 11.1", 283mm
• Diameter: 12.2", 309mm
• Magnet structure diameter: 6.1", 156mm
• Mounting slot dimensions: 0.31", 7.9mm Ø
• Mounting slot PCD: 11.7", 297mm
• Number of mounting slots: 4
• Overall depth: 5.3", 135mm
• Unit weight: 10.4lb, 4.7kg

• Resonant Frequency (Fs): 113.32 Hz
• DC Resistance (Re): 6.626 Ohm
• Coil Inductance (Le): 0.16 mH
• Mechanical Q (Qms): 6.72
• Electromagnetic Q (Qes): 0.72
• Total Q (Qts): 0.65
• Compliance Equiv. Vol. (Vas): 17.06 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 10.63 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.25 grams
• Surface Area of Cone (Sd): 324.29 cm squared
• Sound Pressure Level (spl): 100.17 db

Vintage American Ceramic Guitar Speaker
12" seamed cone with Large Ceramic Magnet, upgrade replacement for Jensen C12N.

• Magnet:  Large Ceramic
• Power: 50 W
• Sensitivity: 99,5 dB
• Weight: 3,4 kgs
• VC Diameter: 1.5″
• 8 Ohm

High-quality headshell for Mesa Mark II / III and similar amp chassis, with a cutout in the bottom for the use of a reverb tank.
The headshell is made of high quality oak, for chassis with a size of 432 x 216 x 60 mm . The high-gloss finish gives the surface a vibrant look, while the dovetail joints complete the look.
Chassis mounting holes must be drilled by the customer depending on the existing chassis and mounting methods.

Specification:

• Size (W x H x D, Outside): ca 474 x 210 x 257 mm
• Designed for Mesa "Short" chassis with dimensions: 432 x 216 x 60 mm
• Solid wood glossy Oak
• Hardware: leather case handle light brown
• Weight: approx. 5 kg

• Power Rating: 0,125 W
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6,3 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M7 (6,8 mm)
• Termination: Solder lugs
• Dimension: 16 mm

• Type: Fender Blackface Style Knob
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 30 x 16,1 mm
• Mounting: Set-Screw

• Power Rating: 0,125 W
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6,3 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M7 (6,8 mm)
• Termination: Solder lugs
• Dimension: 16 mm

Universal size for 12" speakers
Dome diameter: 120 mm - recommended for guitar loudspeaker with massive beaming and higain sounds

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)