EH 12AX7 / ECC83 Balanced
EH 12AX7 / ECC83 Balanced

EH 12AX7 / ECC83 Balanced

Product No.:
eh12ax7-b
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.018 kg per piece
28,20 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

Sovtek 12AX7 / ECC83 WB - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Sovtek 12AX7WB has more gain and saturation than the Sovtek 12AX7WA. Its warmer, darker sound is preferred by Rivera, VHT, Demeter, and Kendrick, among other manufacturers.

27,90 €

EH 7025 (12AX7 / ECC83 HQ)
Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.
19,80 €

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

14,75 €

Resistor Metaloxide 2 Watts / 1,5 kOhms - Pack of 5
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
  • Pack of 5
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
1,15 €
0,23 € per Piece

Resistor Metaloxide 2 Watts / 82 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €

Sovtek EL84 / 6BQ5 - SINGLE

Single tube, not matched

The Sovtek EL84 series produces an unbeatable smooth, warm distortion sound. Excellent replacements in vintage VOX AC-30's and the like, very popular in Fender, Crate and Peavey amps.

16,20 €

EH 12AX7 / ECC83
EH 12AX7 / ECC83
  • The 12AX7EH provides high gain with ultra low noise and detailed, musical tone that rivals the most desirable NOS types.

Files:

Old price: 19,80 €
Only 15,95 €
Offer valid until: 24.03.2026"
JJ 5751

This tube is recommend to tame the gain of an amp and make it sound "sweeter". The 5751 has only a gain of 70 instead of 100 like the typical 12AX7/ECC83 tube type and can be used as a drop in replacement for 12AX7 / ECC83 tubes.

Files:


 

18,50 €

F+T 33 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 33 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
3,10 €

F+T 100 µF @ 350 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 100 µF
  • Voltage Rating: 350 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 37 mm
  • Termination Style: axial
4,95 €

F+T 22 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 22 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
2,75 €

F+T 47 µF @ 450 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 47 µF
  • Voltage Rating: 450 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
2,80 €

F+T 47 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 47 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 21 mm x 37 mm
  • Termination Style: axial
5,20 €