Sovtek EL84 / 6BQ5 - QUAD
Sovtek EL84 / 6BQ5 - QUAD
Sovtek EL84 / 6BQ5 - QUAD

Sovtek EL84 / 6BQ5 - QUAD

Product No.:
soel84-quad
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.1 kg per Quad
64,90 €
16,23 € per Piece

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description

4 tubes, matched as quad

The Sovtek EL84 series produces an unbeatable smooth, warm distortion sound. Excellent replacements in vintage VOX AC-30's and the like, very popular in Fender, Crate and Peavey amps.

Files
Datasheet

Safety Information
Safety Information for Vacuum Tubes

For all electrical, electromechanical and mechanical components, the specifications and operating parameters arising from the respective type standard generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information

  • NOT SUITABLE FOR CHILDREN - choking hazard due to small parts
  • NOT SUITABLE FOR UNTRAINED PERSONS - danger to life due to high voltages
  • The safety and processing requirements applicable to the component must be observed
  • CE conformity applies only when installed professionally
  • Warranty becomes void in case of improper handling
  • The operator is responsible for proper installation
  • Local regulations and VDE provisions must be complied with
  • Never exceed the rated power
  • Never exceed the rated voltages and currents

Required Expertise

  • Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
  • Safe handling of high voltages (up to 500V and more)
  • Reading and understanding circuit diagrams
  • Selection of appropriate tools
  • Knowledge of electrical components and their characteristics
  • First-aid knowledge for electrical accidents
  • Knowledge of VDE regulations and safety requirements

Amplifier Tubes

  • Hazard due to high voltages
  • Hazard due to very high heat generation
  • Hazard due to glass breakage
  • Hazard due to UV radiation in case of defective tubes
Manufacturer
Herstellerinformationen | Manufacturer Information
  • Sovtek
  • Electro Harmonix
  • Tung-Sol (Reissue)
  • Svetlana (Reissue)
  • Genalex (Reissue)
  • Mullard (Reissue)
New Sensor Corporation, 32-33 47th Avenue, Long Island City, NY 11101, USA

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Bourns Potentiometer Mini 250k Log Knurled Shaft
Bourns Potentiometer Mini 250k Log Knurled Shaft

Bourns Mini-Potentiometer, Series PDB181-GTR
Split Knurled Shaft

Specifikation:

  • Power Rating: 100 mW (1/10 W)     
  • Voltage Rating: 150 VAC     
  • Tolerance: 20 %     
  • Element Type: Carbon     
  • Number of Turns: 1 Turn     
  • Shaft Type: Knurled / Serrated     
  • Shaft Diameter: 6 mm     
  • Shaft Length: 19 mm     
  • Type: Rotary     
  • Life: 15000 Cycle     
  • IP Rating: IP30     
  • Minimum Operating Temperature: - 10 C     
  • Maximum Operating Temperature: + 50 C
Files:
3,50 €

Sovtek 6L6 WXT+ STR430 - PAIR
Sovtek 6L6 WXT+ STR430 - PAIR

2 tubes, matched as pair

The 6L6WXT+ features larger plate dimensions and 20 percent higher output than the Sovtek 5881WXT. Extremely low noise and a excellent detailed and harmonic sound, plenty of power and very easy to handle - even while using in "hot" setups.

64,00 €
32,00 € per Piece

CTS Potentiometer 500 kOhm linear, LONG, Knurled Shaft
CTS Potentiometer 500 kOhm linear, LONG, Knurled Shaft
Panel Mount Potentiometer
  • Power Rating: 0,3 W
  • Shaft: 6,3 mm, LONG, Knurled
  • Shaft length: 19,5 mm
  • Drill Ø: 9,5 mm
  • Termination: Solder lugs
  • Dimension: 24 mm
6,40 €

Sovtek 12AX7 / ECC83 WC
Sovtek 12AX7 / ECC83 WC

The Sovtek 12AX7WC has a little bit more gain than the Sovtek 12AX7WB and  the 12AX7WA. The noise floor is still pretty low compared with other 12AX7 tubes and the dependabiliyt very high.

20,80 €

CTS Potentiometer 500k log, DPDT Long Shaft
CTS Potentiometer 500k log, DPDT Long Shaft
CTS Potentiometer
with DPDT Switch, Push-Pull
High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch.
  • Long Shaft
  • Bushing Length: 0.75 in. / 19 mm
  • Shaft Length: 0.375 in. / 9,5 mm
  • Shaft Diameter: 0.24 in. / 6 mm
11,20 €

Sovtek 6L6 WXT+ STR430 - QUAD
Sovtek 6L6 WXT+ STR430 - QUAD

4 tubes, matched as quad

The 6L6WXT+ features larger plate dimensions and 20 percent higher output than the Sovtek 5881WXT. Extremely low noise and a excellent detailed and harmonic sound, plenty of power and very easy to handle - even while using in "hot" setups.

128,00 €
32,00 € per Piece

EH 6V6 - PAIR
EH 6V6 - PAIR

2 tubes, matched as pair

Rugged and wonderful-sounding Power Beam tetrode that performs flawlessly at up to 475 volts. Great replacement for single-ended amps such as Fender Champ, or high plate voltage amps like the Fender Deluxe Reverb.

• Specially developed cathode coating
• Tri-alloy plate material
• Carefully aligned grid

49,80 €
24,90 € per Piece

EH EL34 - PAIR
EH EL34 - PAIR

2 tubes, matched as pair

Mullard reincarnated. With the EL34EH, Marshall amp owners can recreate the balanced tone, deep, tight bass, sweet mids, and well-defined highs of the original equipment Mullards. Innovative design and precision construction give the EL34EH exceptionally smooth and an ideal balance of pleasing even-order harmonics while virtually eliminating undesirable odd-order harmonics.

Files:

53,90 €
26,95 € per Piece

Fender LDR Vibrato
Fender LDR Vibrato
Optocoupler. Vibrato LDR for Fender Amps.
  • Optical side indicated by the dot
7,80 €

Mallory 150's 0,01 µF / 630 VDC
Mallory 150's 0,01 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,53 €

Tube-Town EZ-Board Twin Relais PCB
Tube-Town EZ-Board Twin Relais PCB
  • Tube-Town EZ-Board Twin Relais PCB for channel switching etc.
  • Size: 50 x 44,5 mm
  • Material: 1,6 mm FR4
  • Solder mask: schwarz


For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).

1,30 €

Miniature signal relays RY-12W-K, DPDT , 12V
Miniature signal relays RY-12W-K, DPDT , 12V
Miniature Signal Relays
  • Dimensions: 20.2 x 9.8 x 12.5 mm
  • Function: 2 x changeover contacts, DPDT
  • Nominal voltage: 12 V/DC
  • Nominal load: 1 A - 24 V/DC, 0.5 A - 120 V/AC
  • Max. switching voltage: 60 V/DC / 120 V/AC

Files:

2,50 €

Finder Relays DPDT , 125V 2A, 12V
Finder Relays DPDT , 125V 2A, 12V

Relays, type Finder Dual-In-Line-Relais 2,0 A
for low breaking capacity

  • Compact dimensions: 20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
  • Function: 2 x changeover contacts
  • Constant/inrush current: 3.0 A/2.0 A
  • Rated/switching voltage: 125 VAC/250 VAC
  • Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
  • Switching current DC 1:    2.0 A/30 V, 0.3 A/110 V
  • Minimum switching load: 10 mW (0.1 V/1.0 mA)
  • Contact material: AgNi+Au (5.0 µm)
  • Useful mechanical life DC: 10 x 10 exp6 switching cycles
  • Electrical life AC 1: 100 x 10 exp3 switching cycles
  • Insulation coordination EN 61810-5: 1.2 kV/2
  • Electric strength coil/contact (1.2/50 µs): 1.5 kV
  • Response/release time: 6.0 ms/2.0 ms
  • Ambient temperature: –40 to +85 °C
  • Relay protection class: RT III
  • Certifications: CSA, UL, GOST
Files:
2,70 €

Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 22 mm
  • Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,45 €

Silicon Tube Damper for 6V6
Silicon Tube Damper for 6V6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 28 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €