Sovtek 6L6 WXT+ STR430 - QUAD

• Type: Multisection Capacitor
• Capacitance: 50 + 50 µF
• Voltage Rating: 500 V
• Tolerance: - 10% / +30 %
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 35 mm x 50 mm
• Termination Style: radial, solder lugs

2 tubes, matched as pair

JJ developed a completly new tube which is compatible with the EL84. The difference lies in the around 25% decreased headroom. This will give you the benefit to get the often desired power amp overdrive at lower volume levels. We recommend this tube for low wattage amps to get a better sound at bedroom levels.

Please check the datasheet!

Files:

• Datasheet

• Type: Aluminum Electrolytic Capacitors
• Capacitance: 47 µF
• Voltage Rating: 500 V
• Tolerance: +/- 20%
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 21 mm x 37 mm
• Termination Style: axial

• Type: Aluminum Electrolytic Capacitors
• Capacitance: 33 µF
• Voltage Rating: 500 V
• Tolerance: +/- 20%
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 18 mm x 39 mm
• Termination Style: axial

4 tubes, matched as quad

Mullard reincarnated. With the new EL34EH, Marshall amp owners can recreate the balanced tone, deep, tight bass, sweet mids, and well-defined highs of the original equipment Mullards. Innovative design and precision construction give the EL34EH exceptionally smooth and an ideal balance of pleasing even-order harmonics while virtually eliminating undesirable odd-order harmonics.

Files:

• Datasheet

• Inductance (+/- 15%): 5 H
• Resistance (+/- 15%): 105 Ohm
• max Current DC: 150 mA
• max Voltage DC: 400 V
• Leads: min 12 cm
• Hipot tested (100%) mit 1500 VAC

• Datasheet

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with  two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

• Documentation

Output Transformer, replacement for JTM45 with EL34 / 5881 and KT66

• Pri1: 8 kOhm / CT
• Pri2: 6,6 kOhm / CT
• Sec: 4-8-16 Ohm
• Power: 70 Watt
• Made in Europe
• Inductance Primary 8 kOhm: 660 Henry (@240V,50Hz open circuit)
• Inductance Primary 6,6 kOhm: 540 Henry (@240V,50Hz open circuit)
• Minimum Reproducible Frequency at max power (70W): 20Hz/-3dB
• Re(a-a) 8 kOhm: 185ohm +/-5%
• Re(a-a) 6,6 kOhm: 165ohm +/-5%

Files:

• Datasheet

Remake of a 12AY7 / 6072. Smooth sound, great for fender-like amps.

Files:

• Datasheet

• Type: Film capacitor
• Dielectric: polyethylene terephthalate foil
• Capacitance: 0,1 µF
• Voltage Rating: 250 VDC
• Tolerance: -20 % / +20 %
• IEC climate category: 55/100/56
• Operating Temperature Range: - 55°C / + 100 °C
• Dimensions: 5 mm x 10,5 mm x 10,3 mm
• Termination Style: radial
• Grid: 7,5

• Type: Film capacitor
• Dielectric: polyethylene terephthalate foil
• Capacitance: 0,022 µF
• Voltage Rating: 250 VDC
• Tolerance: -20 % / +20 %
• IEC climate category: 55/100/56
• Operating Temperature Range: - 55°C / + 100 °C
• Dimensions: 4 mm x 9 mm x 13 mm
• Termination Style: radial
• Grid: 10