• Size (L x W): ca. 100 x 80 cm (only available in this size)
• Original Manufacturer
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

Bipolar Electrolytic capacitor

• Capacitance: 10 µF
• Voltage Rating: 100 V
• Tolerance: - 20 % / +20 %
• Operating Temperature Range:- 40°C / + 105 °C
• Dimensions: Ø 8,7 mm x 12,7 mm
• Termination Style: radial
• Grid: 5

B-STOCK: with flaws in the fabric

Fender Style Grillcloth in white. To get the best results with this grillcloth you should not color the baffle black.
Same texture and material as the Fender Cloth

• Size: ca. 60 x 90 cm (only available in this size)
• Fender Style
• Material: 100% Polypropylen
• Price per pcs.
• Actual shades may vary.

• Rated Voltage: 250 VAC
• Contact caps: nickel-plated brass
• Size: Ø 5 mm x 20 mm
• Pack of 10

Fender® style footswitch

• 1-button
• Vintage style
• RCA-Plug
• ca. 5 m shileded wire

Resistor Metaloxide 2 Watts

• +/- 5% tolerance
• -55° C to 240° C operating range
• Max 500 V
• Excellent flame retardant coating
• Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

4 tubes, matched as quad

Mullard reincarnated. With the new EL34EH, Marshall amp owners can recreate the balanced tone, deep, tight bass, sweet mids, and well-defined highs of the original equipment Mullards. Innovative design and precision construction give the EL34EH exceptionally smooth and an ideal balance of pleasing even-order harmonics while virtually eliminating undesirable odd-order harmonics.

 

Files:

• Datasheet

• Length: 100 mm
• Width: 2,5 mm

• screw-mount for internal installation.
• White
• Material PA 6.6
• max. harness diameter: 9,5 mm

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Flat Cable-Plug, Cable Shoe, crimp connection for width max 5,2 x 0,5 mm
Pack of 10 pcs