Grillcloth Fender Blue-White-Silver AGED - 60 x 90 cm

Case Handle imitation leather, Dog-Bone Style

• Mounting fittings: Steel, nickel plated
• Color: Light brown
• WITHOUT NUTS AND SCREWS

Round dish / ferrule for 6.3 mm jack

• metal
• black powder coated
• incl. 3 screws

• 6,3 mm jack
• mono
• Installation diameter: 10 mm

Files:

• Datasheet

Fender Strap Handle

• Fender #0990947000
• Plastic covered with steel inner core
• End plates: Steel, nickel plated
• Color: Black
• Mounting hardware: Screws and t-nuts included

Set of 4 feet with screws

• d = 24 mm
• h = 8 mm

Coupling Sleeve

Bare steel. Connection can be separated as often as  desired.
Fast screwing into holes with hand, electric and pneumatic tools.
Sharp self - cutting outside thread. Inside thread M5.

Application:   Wood,  plastic and other soft materials.

suitable spiral drill bit 9mm, Product No.: rk-208090

 

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

• Datasheet

2 tubes, matched as pair

Extremely consistent and reliable work-horse power beam tetrode. Built to rigid military standards, the 5881WXT will tolerate higher voltages than most other 6L6 types. Frequently used as replacement for old 7027s in vintage Ampegs. 
Compared to the 5881WGC, the Sovtek 5881WXT has a taller tube base.