Cloth Wire AWG #22 (0,32 mm²) solid, blue, 5 m

• Pushback Wire, solid copper, tinned
• With vintage cotton fabric insulation
• Cross-Section: AWG #22 / 0,32 mm²
• Outer Diameter:  0,64 mm
• Packing: Spool 50 ft / ca. 15 m

• Pushback Wire, solid copper, tinned
• With vintage cotton fabric insulation
• Cross-Section: AWG #22 / 0,32 mm²
• Outer Diameter:  0,64 mm
• Packing: Spool 50 ft / ca. 15 m

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

High performance twist drill suitable for all normal drilling
in conventional materials.

HSS rolled
Point cut: helical point
Point angle: 118°
Surface: black, steam tempered
right hand cutting

Mounting kit for all TT-Chassis which are designed for mounting with cagenuts and 19" housings

Included are:

• 4 x cagenut M6
• 4 x thread screw M6 x 30

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

Drill Ø: 12 mm
Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

• Rated Voltage: 250 VAC
• Contact caps: nickel-plated brass
• Size: Ø 5 mm x 20 mm

Knob Fender Style Vintage

• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 20,3 x 11,8 mm
• Mounting: Set-Screw with Bras insert