Alpha 100 kOhm log / Audio, 3,8"

Octal Socket Belton VTB8-PTS

• High quality Micalex socket
• Print / PCB mount
• Glassfiber filled PPS black body
• for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

 

Noval Socket Belton VTB9-PT

• Version: High quality Micalex socket
• Glassfiber filled PPS black body
• Termination Style: print / pcb mount
• for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

• Type:Toggle Switch
• Version:SPST, ON-OFF
• Rating: 3A / 250V, 6A / 125V
• Insulation resistance: 100MΩ min.
• Dielectric strength: 1000V min.
• Operating Life: 25.000 cycles
• Drill Ø: 12 mm
• Termination Style: solder-lugs

• Size (B x L) : 74 x 100 cm (only available with this size)
• Material: 94 % Polypropylen, 6 % Acrylic
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

Panel Mount Dual Potentiometer

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M8 (7,8 mm)
• Termination: Solder lugs
• Dimension: 24 mm

Panel Mount Potentiometer - 3/8"

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: 3/8-32 (9,45 mm)
• Termination: Solder lugs
• Dimension: 24 mm

10" seamed ribbed cone with Large Ceramic Magnet, the replacement for C10N, paper voice coil.
Similar to the 10LC but with less output but a more balanced sound, with more sparkle on the top end. A slightly smoother sound that retains headroom.
Originally intended for studio or home use, many musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.  
Paper voice coil versions are most similar to the originals and impart a woody tone that is flatter when directly compared to our standard coil. 

• Size: 111,5 x 59,5 x 27 mm
• Color: Natural

Files:

• Datasheet

If the 4AB3C1B rever is to long for you than you should use this tank, which has a short delay time.

• Springs: 2
• Delay Type: short
• Size: long
• Replacement: Fender

2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

• Datasheet