TT-Chassis 042 - JC18

Spezification

• Size:
  • Outside(B x H x T): 467 x 230x 215 mm
• fits Chassis: #009 (siehe list bellow)
• Hardware: none
• Weight: ca. 4 kg
• Wood:
  • Body: 15 mm Plywood
  • Front/Backpanels: Body: 15 mm Plywood
• Surface: untreated

• Drawing

TT-Cabs Headshell designed for the JC18 amp kit

Specifications

• Tolex: Marshall-Style black
• Hardware: black
• Piping: white
• Weight: ca. 4,6 kg
• Wood: 12 mm Birch
• Size (W x H x D): 465 x 230 x 215 mm

• up to T 70 °C
• with one fuse holders 5.0 x 20 mm
• Housing: polyamide
• UL 94 V-0, black
• for panel mounting
• Double-pole + protective ground 10 A/250 V
• single-pole fusing with bridge to the fuse holder at the L terminal
• fuse holder terminals for soldering
• Design to IEC/EN 60320-1
• fuse holder to IEC/EN 60127-6
• Certifications: ENEC, Semko, UL, CSA

• Color: black
• Size:
  • A: 14 mm
  • B: 18 mm
  • D: 24 mm
  • H: 7 mm
  • h: 3 mm
• Material: soft PVC,UL 94 V-2
• Operating temperatures: –30 to +60 °C

• Wide body and extremely durable contacts
• Mates with all mono A-gauge plugs acc. EIA RS-453 standard

Files:

• Datasheet

Clamp for capacitors

• Material: Steel, galvanized
• Diameter: 35 mm

• Fuseholder, Chassismount, 5x20 mm
• IP 40
• Rated voltage: 250 VAC
• Rated current: 10 A (VDE), 16 A (UL/CSA)

Files:

• Datasheet

• Version: High quality Micalex socket
• Chassis mount
• Termination Style: solder lugs
• for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

Matchless Style Combo, 1X12, fits our 18W Chassis

• Size:
  • A (width): 610 mm
  • B (height): 508 mm
  • C (depth): 226 mm
• Chassis Cutout: ca 420 x 55 mm
• Tolex: customer preference
• Grillcloth: customer preference
• Hardware: customer preference
• Back: Open-Back
• Weight: ca. 15 kg
• Speaker: None
• Wood: 12 mm birch plywood

TT-Cabs Headshell designed for the JC18 amp kit

Specifications

• Tolex: Marshall-Style black
• Hardware: black
• Piping: white
• Weight: ca. 4,6 kg
• Wood: 12 mm Birch
• Size (W x H x D): 465 x 230 x 215 mm

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

• Square mounting base
• Suitable for cable ties up to 5 mm wide
• Self-adhesive
• Size: 20 x 20 mm
• Color: black
• Packaging unit: 10 pieces

• Handle Plastic covered with steel inner core
• Metal Endcaps w/ Plastic Cover

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (ah4023b)
• Powder Coated black
• Internal radius: 12 mm
• 16 x Screws, flat head, black

Width ca. 115 cm
Price per linear meter.
Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

Material:
80% PVC Film
20% Poly-Cotton Fibre

REACH compliant

Please note !
when you order more than 1 m and select Deutsche Post / DHL Parcel (Not DHL Express)
we need to cut the width of the tolex to ca. 115 cm. Otherwise it is not
possible to ship the tolex with DHL because the parcel length would
exceed the maximum parcel length.

• Material: Phenolic
• Shaft Size: 6 - 6,4 mm
• Size: 19,5 x 15,3 mm
• Mounting: Set-Screw, hexagon

• Mounting fittings: Steel, nickel plated
• Color: Black
• WITHOUT NUTS AND SCREWS