Set Corners w/ cutaway 2 leg, Fender Style black incl. Screws

High Quality Speaker Cabs for the DIY
Specifications

• Size: ca. 510 x 420 x 240 mm
• 1 x 12"
• Material:
  • Body: 18 mm Pine Plywood
  • Baffle: 12 mm Birch Plywood
• Tolex: -
• Grillcloth: -
• Hardware: -
• Back: Open-Back
• Weight: ca.  7,5 kg
• Speaker: None

[content:3210142]
[content:3210137]
[content:3210136]

The ideal speaker cabinet for the DIY guitarist!
All parts CNC milled and drilled from high quality birch plywood for easy assembly at home or as a base for your own creations.
 
Size based on the very popular 112AM Lemberg:

• Width: 500 mm
• Height: 410 mm
• Depth: 240 mm
• Speaker cutout: 12"
• Material: 15 mm birch plywood housing, 12 mm birch plywood baffle

The kit includes all components to build the speaker box according to standard as per documentation, such as:

• Connection terminal, round
• Fixing screws for terminal
• Screws and drive-in nuts for speaker mounting
• Wood glue
• Wooden dowels

Not included

• Cable set
• Corner
• Rubber pads
• Handle
• Wood screws

Files:

• Building Instruction (PDF)

[content:3210136]

High Quality Speaker Cabs for the DIY
Specifications

• Size: ca. 590 x 400 x 300 mm
• 1 x 12"
• Material:
  • Body: 15 mm Pine Plywood
  • Baffle: 12 mm Birch Plywood
• Tolex: -
• Grillcloth: -
• Hardware: -
• Back: Open-Back
• Weight: ca. 9,8 kg
• Speaker: None

[content:3210142]
[content:3210137]
[content:3210136]

Empty headshell for TT-Chassis #073 as well as chassis with the same size (Fender Princetone). Surface untreated. Delivery without hardware. Suitable accessories see link list below.

Specifications

• Size (W x H x D, external): 505 x 242 x 220 mm
• Weight: approx. 3 kg
• Wood: 18 mm Wise Spruce
• Rugged construction, Dovetail joints
• Made in Germany

[content:3210136]

High Quality Speaker Cabs for the DIY
Specifications

• Size: ca. 660 x 570 x 280 mm
• Speaker cutout: d=360 mm
• Material:
  • Body: 18 mm Pine Plywood
  • Baffle: 12 mm Birch Plywood
• Tolex: -
• Grillcloth: -
• Hardware: -
• Back: Open-Back
• Weight: ca.12,3 kg
• Speaker: None

[content:3210142]
[content:3210137]
[content:3210136]

The ideal speaker cabinet for the DIY guitarist!
All parts CNC milled and drilled from high quality birch plywood for easy assembly at home or as a base for your own creations.
 
Size:

• Width: 350 mm
• Height: 335 mm
• Depth: 225 mm
• Speaker cutout: 8"
• Material: 15 mm birch plywood housing, 12 mm birch plywood baffle

The kit includes all components to build the speaker box according to standard as per documentation, such as:

• Connection terminal, round
• Fixing screws for terminal
• Screws and drive-in nuts for speaker mounting
• Wood glue
• Wooden dowels

Not included

• Cable set
• Corner
• Rubber pads
• Handle
• Wood screws

Files:

• Building Instruction (PDF)

[content:3210136]

Amp Handle VOX-Style, Dogbone

• Color: Black
• Hardware: none included

• Size (W x H): ca. 100 x 75 cm (only available in this size)
• Material: 100 % Polyamid
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size:
  • Ø: 19
  • H: 12,5 mm
• Mounting: Set-Screw

Strap Handle Heavy Duty

• Plastic covered with steel inner core
• Steel, black plated end plates
• Black
• Screws and t-nuts included

Round dish / ferrule for 6.3 mm jack

• metal
• black powder coated
• incl. 3 screws

• Rubber foot with steel insert
• Size: d = 25 mm, h = 11 mm
• Pack of 4
• Screws included

PVC piping for baffles and front panels

• Clear with metal Tinsel
• Marshall style
• Size 4.8 x 10 mm
• 4 m piece

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

• Inner diameter ca. 45 mm
• Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

• Inner diameter ca. 22 mm
• Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
• Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.