Rubber Ring for Retainer re-02
Rubber Ring for Retainer re-02
Preview: Rubber Ring for Retainer re-02
Preview: Rubber Ring for Retainer re-02
Rubber Ring for Retainer re-02
Rubber Ring for Retainer re-02
Rubber Ring for Retainer re-02
Mobile Preview: Rubber Ring for Retainer re-02
Mobile Preview: Rubber Ring for Retainer re-02

Rubber Ring for Retainer re-02

Product No.:
re02-ring
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.007 kg per piece
0,70 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description

Silicone ring to protect against vibrations, suitable for retainer re-02. Retainer NOT included.

Manufacturer
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Needed for:

Retainer EL34 / 6L6
Retainer EL34 / 6L6

Retainer for EL34 / 6L6 Tubes

0,95 €

Customers who bought this product bought also the following products:

Retainer 6550/KT88
Retainer 6550/KT88

Retainer for 6550 / KT88 Tubes

1,60 €

Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 22 mm
  • Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,45 €

Silicon Tube Damper for 6L6
Silicon Tube Damper for 6L6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 34 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €

Silicon Tube Damper for KT88
Silicon Tube Damper for KT88
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 45 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,90 €

Resistor Metaloxide 2 Watts / 47 kOhms
Resistor Metaloxide 2 Watts / 47 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

Carbonfilm Resistor 3.3k / 1 Watt - Pack of 5
Carbonfilm Resistor 3.3k / 1 Watt - Pack of 5

Carbonfilm Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS

0,80 €
0,16 € per Piece

Carbonfilm Resistor 22k / 1 Watt - Pack of 5
Carbonfilm Resistor 22k / 1 Watt - Pack of 5

Carbonfilm Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS

0,80 €
0,16 € per Piece

Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
  • Single Relais PCB for channel switching etc..
  • Size: 41 x 35 mm
  • For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
1,10 €

Rotary Switch 1 Pol / 3 Pos - 3A@250VAC - Impedance / Voltage Selector
Rotary Switch 1 Pol / 3 Pos - 3A@250VAC - Impedance / Voltage Selector
High Power Rotary Switch
  • Can be used as Voltage or Impedance selector
  • 1 pole / 3 position
  • 3 A @ 250 VAC
  • 6 A @ 125 VAC
  • Solder lugs
  • Size: 28 mm x 39,5 mm
  • Frontpanel drill: 10,5 mm
  • Shaft Diameter 6 mm, D-Shaft
8,90 €

Heat shrink tube, set of 100, multicolored
Heat shrink tube, set of 100, multicolored

Mixed sizes and colors, length 10 cm / ea

  • 30 x 1,5mm Ø
  • 30 x 2,5mm Ø
  • 20 x 4mm Ø
  • 10 x 6mm Ø
  • 6 x 10mm Ø
  • 4 x 13mm Ø

In plastic box

1,45 €

Heat shrink tube, set of 100, black
Heat shrink tube, set of 100, black

Mixed sizes, length 10 cm / ea, black

  • 30 x 1,5mm Ø
  • 30 x 2,5mm Ø
  • 20 x 4mm Ø
  • 10 x 6mm Ø
  • 6 x 10mm Ø
  • 4 x 13mm Ø
1,60 €

Resistor Metaloxide 2 Watts / 33 kOhms
Resistor Metaloxide 2 Watts / 33 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €

Resistor Metaloxide 2 Watts / 22 kOhms
Resistor Metaloxide 2 Watts / 22 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €

Tube-Town EZ-Board 2-Way Channel Switch
Tube-Town EZ-Board 2-Way Channel Switch
  • Tube-Town EZ-Board
  • for channel switching etc.
  • Size: 65 x 43 mm

For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
PCB only, no components included. Please see the datasheet for possible setup.

Files:

1,20 €