Footswitch 3PDT, Latching - Soft Touch

• anodized aluminum cap for foot switch
• with set-screws
• for all foot switches with a 10 mm head diameter

• Type: Footswitch
• Version: 3PDT Latching
• for True Bypass
• Rating: 1A/9VDC
• Contact resistance: <30mΩ
• Insulation resistance: 500VDC-100MΩ min.
• Dielectric strength: 500VAC for 1 minute
• Operating Life: 30.000 cycles
• Operating Force: 1.0±0.3Kgf
• Termination Style: solder-lugs

Files:

• Datasheet

• Soft Touch, low actuation force
• for real bypass
• Solder lugs

• Mounting fittings: Steel, nickel plated
• Color: Dark blue
• WITHOUT NUTS AND SCREWS

TT-Cabs Headshell designed for the AC18 amp kit

Specifications

• Tolex: Vox-Style black basket
• Handle: Vox-Style black
• Grillcloth: Vox-Style
• Piping: gold
• Weight: ca. 4,6 kg
• External Size: (W x H x D): 465 x 230 x 215 mm
• Wood: 15 mm Birch

• Size: 37 x 143 mm
• Holes: 4 x 15 for turret tur-tt32-25
• Material: FR4 2 mm
• Solder stop: black
• Position print: white
• 2-layer, plated through

• Springs: 2
• Delay Type: long
• Size: long
• Replacement: Fender, Marshall, Ampeg "F"
• corresponds to Fender part number 006-4063-049
• Accutronics by Accu-Bell, Made in Korea

Fender Style Pilot Light Set

• Chassis Hole: 15,5 mm
• Threading: 9/16 - 24
• Jewel red

• Solder lugs
• Power Rating: 2A@250VAC
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free

2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

• Datasheet

• Reverb Driver 125A20B / 022921 Single-Ended
• Pri: 22800 Ohm
• Sec: 8 Ohm
• Power: 3,5 Watt

Files:

• Datasheet

• Type: Toggle Switch
• Version: DPDT, ON-ON
• Rating: 3 A / 250VAC, 6 A / 125VAC
• Drill Ø: 6 mm
• Termination Style: solder-lugs

• Version: High quality Micalex socket
• Chassis mount
• Termination Style: solder lugs
• for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M8 (7,8 mm)
• Termination: Solder lugs
• Dimension: 24 mm